AIRLESS atomization, under high pressure without any atomizing air delivered to the spraygun, allows the spraying of high viscosity product, a precise fan width determined by the angle of the tip chosen and the spraying of thick coats of paint.
■ Full stainless steel fluid passage
■ 50 years of experience
■ High cycling rate (opening/closing)
MATERIAL HANDLED
Medium to high viscosity primers, anti-corrosion paints, structural paints, U.V paints, released agents, underbody coatings, oil and glues.
CUSTOMER BENEFITS
► Simple construction with limited number of parts : Durability & Reduced cost of ownership
► Compact and light weight
► Easy servicing and cleaning
|
CIRCULATION
IN THE GUN (2)
|
 |
PRESSURE
RANGE (1) |
▪ To apply low to semiviscous material with limited pressure loss
▪ Heated fluid installation to
prevent product settlement |
▪ Spring for 240 bar
operating pressure (ASI 24)
▪ Spring for 400 bar operating pressure (ASI 40) |
| FULL STAINLESS STEEL PASSAGE (3) |
NEEDLE BALL (5) |
| Compatible with a large range of products including waterborne, high solids and U.V paints. |
Two different needle ball sizes
for optimal performance and
minimal laminar wear upon material viscosity. |
| RULON OR GT SEAL CARTDRIGE (4) |
NO TIPS SEAL NEEDED (6) |
Strong resistance to very
abrasive coating (high solids and U.V paints) for extended lifetime. |
Spray tip mounted directly on diaphragm without seal. |
| BALL SEAT CONSTRUCTION (5) |
GUN MOUNTING (7) |
Nickel carbide ball with
carbide seat for higher durability. |
Simple mounting on 8 mm round bar. Easy adjustment. |
BACK TO THE PRODUCTS LIST
Loading, please wait...
France 
France
France
