Hopper Feed:
• 25 kg (55 lbs) Fluid bed simply lifts off the chassis base, the plenum and fluidising
tile quickly detach from the bed body to facilitate ease of cleaning.

Direct Box Feed:
• Colour changes in seconds – simply unclip the venturi, remove the suction tube and blow clean.
• Vibrating Chassis – mounted at an angle in two planes so that powder is extracted
from the lowest point ensuring maximum powder utilisation.
• High efficiency turbine vibrator activatod only on triggering of gun to minimise powder compaction.
• Accepts all popular powder containers up to 30 kg (66 lbs).
• Controlled venturi support arm simply lifts clear to a park position for fast box replacement
when changing colour.

• Can be supplied as either a single or double operator unit.
• Operator friendly - simple to use with light weight spray gun.
• Ergonomic design.
• Compliant with latest European and USA standards and requlations.

TECHNICAL SPECIFICATION

> Electrical Data:
Input Voltage 100 - 260 Volts, 50/60 Hz, Single Phase.
Power Consumption (Full Load): 45 VA.
Input Current (Max): 400 mA. at 115 V, 200 mA at 230 V.
Electrostatic Output Voltage: 10 - 85 kV. Negative (Max).
Electrostatic Output Current: Mode 1; 0 – 50 µA. Mode 2; 0 - 100 µA.

> Pneumatic Data:
Input Air Pressure: 7 0 Bar (100 p.s.i.) maximum.

> Input Air Conditioning:
Oil Free to 0.1 p.p.m. and dry to 1.3g/cubic Nrm

> Air Consumption Nominal:
Direct feed Manual unit: 15.0 cubic m/h. (9.0 cfm)
Hopper feed Manual unit: 10.0 cubic m/h. (6.0 cfm)

> Input Connection:
Manual Units 1/4 BSPMP air fitting.

> Weights & Dimensions:
Packed Weight:
Direct feed Manual unit: 40 kgs.
Hopper feed Manual unit: 42.5 kgs.
Packed Dimensions: 72 cm x 51 cm x 106 cm.
Total Packed Volume: 389 m3
Manual Spray Gun: 495 g (17.5 ozs) without cables & hoses.