 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
 |
|
||||||||||||||||||
 |
 |
 |
|
||||||||||||||||
 |
 |
 |
|
||||||||||||||||
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
|
||||
 |
 |
|
|||||||||||||||||
 |
 |
 |
|
||||||||||||||||
 |
|
||||||||||||||||||
 |
 |
|
|||||||||||||||||
 |
|
||||||||||||||||||
Manual Range: |
|
 |
Manual Gun MG400Features Eurotec's TOTAL ENERGY CONTROL (Patent Pending) unique charging system giving automatic control of both current and voltage. Click here to see a larger picture |
 |
Manual Powder Coating System 400D
|
 |
Manual Powder Coating System 400H (Hopper Feed)Features Eurotec's TOTAL ENERGY CONTROL (Patent Pending) unique charging system giving automatic control of both current and voltage. Gives improved safety, efficiency of charging, minimum surface disruption and unrivalled recoatability. Unit is robust, stable and easily transportable on large conductive castors. 25Kg (55lbs) Fluid bed simply lifts off the chassis base, cleaning could not be easier as the plenum and fluidising tile quickly detach from the bed body. Can be supplied as a single or double operator unit. Fluid bed unit may also be configured for AG300 automatic powder guns. Click here to see a larger picture |
 |
Manual Gun 400L Lab UnitThe Manual 400L Lab Unit is perfect for laboratory use, on site demonstrations and small batch production. It utilizes a standard MG400 Hand Gun and a standard GCU400 Control Unit. A Venturi and Cup Assembly simply connects to the bottom of the gun handle. The Cup may be used as a short funnel for fast and convenient laboratory sampling, or fitted with the clear extension for larger powder quantities. A complete set of deflectors and a slotted nozzle are supplied to give complete flexibility of spray pattern. Eurotec’s Patented TOTAL ENERGY CONTROL charging system is used with the extended TEC2 mode to give complete and automatic control of both Voltage and Current to suit any product or powder. Supplied with international mains electrical plug adaptor and a selection of pneumatic airline adaptors. Mains operating voltage 100 – 240 V 50/60 Hz. All contained within a tough padded flight bag with additional document compartment for instruction manuals etc. Total weight 9.3 Kg. Click here to see a larger picture |
 |
Automatic Gun AG400Features Eurotec's TOTAL ENERGY CONTROL (Patent Pending) unique charging system giving automatic control of both current and voltage. Light, compact and incorporates a field replaceable power supply. Comes complete with a circular deflector and a flat nozzle giving excellent penetration. Regulated forward air to the spray nozzle is multifunctional. Gun is usually mounted on a support bar by means of a multi - position locking clamp which gives complete flexibility with regard to distance and angle of gun to work piece. Click here to see a larger picture |
 |
Reciprocator ER4SAvailable as standard with 1.5M, 2.0M or 2.5M stroke lengths. Variable stroke length and speed (up to 75cm/sec) easily adjusted via built in control panel. Rugged construction incorporating dust seals. Remote start / stop facility. Large wheels with 90 degree swivel locks and quick release breaks for easy maneuverability. Self-contained. Click here to see a larger picture |
 |
Swinger ES4The Eurotec swinger is an electrically driven spray gun manipulator. The ES4 has multiple gun facility, capable of performing the same or various motions. Fixed gun can be angled to access difficult coating areas. Spray guns mounted in swiveling clamps on support bars can reciprocate vertically over a short stroke or alternatively swing through an arc. The stroke and speed of the reciprocating vertical mounting bar is variable. Fabricated from heavy gauge steel the swinger is fitted with heavy duty ground wheels complete with parking brakes for stable operation. The complete flexibility of angle, plane and distance from workplace is combined with variable speed to give the ultimate in coating technology. Click here to see a larger picture |
 |
Reclaim / Top UnitThe AR/TU Automatic Reclaim/Top-up system is a self contained system to automatically operate and control the recovery of a re-usable over sprayed powder from the cyclone collection bins to the main system fluid bed, and to transfer fresh powder from a separate fluid bed, to ensure that the powder in the main fluid bed is kept at a constant level. The recovery and top-up systems can be operated either individually or together. All unit functions within the RTU-300 Control Unit are governed by a small PLC (Programmable Logic Controller). Virgin powder transfer pumps triggered from level sensors fitted in the main fluid bed. Maximum warning sensors provided in the cyclone collection bin and main fluid bed operate audio/visual signal to give warning that overflowing is imminent. Reclaimed powder returned to the main fluid bed via a mini-cyclone (velocity reducer) and a simple pneumatically driven vibratory sieve. Return of reclaimed powder operated on a timed basis utilizing a PLC duty cycle adjustable to suit individual installations. Both reclaimed and fresh powder transferred by simple and efficient high volume venturi powder pumps. |
 |
Automatic System ConsoleLatest state-of-the-art technology Supplies all primary electrical and pneumatic system functions. Designed to meet the latest safety standards and recommendations. Individual modules easily removable for servicing. Robust stand can bee fitted with leveling feet for fixed positioning or with a large conductive castors for mobile operation. System incorporates TOTAL ENERGY CONTROL (Patent Pending), ensuring excellent penetration, smooth powder lay down with no surface disruptions even at high film build. Unrivalled recoatability. Click here to see a larger picture |