PMP150 E Airspray pompe à membrane
- Conception simple: maintenance et entretien simplifiés
- Technologie membranes compacte: débit produit régulier sans pulsation pour une finition parfaite
- Conçue pour les produits types EMAIL et hydrodiluables
Désignation | Valeur | Unité(s) |
---|---|---|
Rapport de pression | 1 : 1 | |
Pression produit maximum | 6 (87) | bar (psi) |
Pression d'air maximum | 6 (87) | bar (psi) |
Température maximum | 50 (122) | °C (°F) |
Cylindrée | 100 (3.4) | cc (oz) |
Niveau sonore | < 70 | dBa |
Débit produit à 30 cycles/min | 3 (0.8) | l/min (gal/mn) |
Débit libre | 19 (5) | l/mn (gal/mn) |
Consommation d'air à 30 cycles/min à 4 bar | 1.1 (0.6) | m³/h (cfm) |
Entrée air | F 3/8" BSP | |
Sortie produit | F 3/8" BSP | |
Entrée produit | F 3/8" BSP | |
Nombre de cycle par litre produit | 10 | |
Hauteur | 22 (8.7) | cm (in) |
Largeur | 20 (7.9) | cm (in) |
Profondeur | 15 (5.9) | cm (in) |
Matériau en contact produit - polypropylène, PTFE, polyuréthane | ♦ | |
Diaphragme en polyuréthane | ♦ | |
Poids | 5 (11) | kg (lbs) |
Designation | Setup | Part number |
---|---|---|
POMPE PMP 150E NUE | Bare pump | 144932000 |
Designation | Details | Part number | |
---|---|---|---|
ALIMENTATION DAIR MOTEUR POUR PMP | Air motor power regulator to set the motor pressure | 1 | 151753050 |
SUPPORT MURAL POUR PMP150 | Bracket to mount the pump on a wall | 2 | 051751030 |
SUPPORT PR POMPE 150 PRATIK | Spare tripod | 4 | 051755010 |
ENS GODET GRAVITE AVEC SUPPORT POUR PMP 150 PRATIK | 2L paint cup with support to mount on the tripod | 5 | 151758100 |
CHARIOT 1 BRAS | 151730140 |
Designation | Details | Part number | |
---|---|---|---|
POCHETTE DE JOINTS MOTEUR POUR PMP 150 _PDM 1.175 | Seal kit for the air motor | 1 | 144931091 |
ENS.GODET GRAVITE | 2L paint cup without support to put on the tripod | 2 | 151662355 |
POCHETTE DE JOINT PRODUIT TEFLON. | Seal kit for the fluid section in Teflon | 3 | 144931092 |
Format : application/pdf
Taille : 14Mo
Format : application/pdf
Taille : 6Mo