RPG
Robotic Paint Gear Pump for Flow management
The Robotic Paint Gear pump "RPG" is dedicated for robotic applications. It combines fast color change with the most compact design of the market allowing both low paint loss and high flowrate output.
Compact Design
Fast Color Change
High Reliability
Description
Technical Data
Equipment
Kits
Documents & Media
Technologies
Markets
Performance
1 Most compact robotic gearpump on the market (63mm height x 48mm width)
2 Quick color change thanks to its direct solvent injection system
♦ High mechanical precision components ensure accurate & stable flow
♦ High cleaning performance upon color change phase
Productivity
2 Process Plate Bypass & Fast cleaning enables optimum gear rinsing (teeth and axles)
3 Integrated lubrication system
3 Leak detection system thanks to transparent hoses reveling color in case of leakage
♦ Five range capacities: 1.2 cm3/rev - 3cm3/rev - 4.5 cm3/rev - 6 cm3/rev - 9 cm3/rev, with up to 150 rpm
Sustainability
♦ ADLC stainless steel Coating for an improved lifetime
♦ Easy to upgrade from previous generation with dedicated upgrade kits
♦ Low running costs - Low wearing parts with stainless steel ADLC
♦ Cleaning lubricates rotating parts for longer life
| Designation | Value |
|---|---|
| Maximum Air Pressure (bar) | 6 |
| Maximum Air Pressure (psi) | 90 |
| Maximum Fluid Output (cc/min) | 1080 |
| Maximum Fluid Output (cfm) | 0.04 |
| Minimum Output (cc/min) | 30 |
| Minimum Output (oz/min) | 1 |
| Maximum Material Pressure (bar) | 15 |
| Maximum Material Pressure (psi) | 220 |
| Air Inlet Fitting | 2.7x4 |
| Certification | II 2 G Ex h IIA T4 Gb |
| Nominal maximum rotation speed (rpm) | 120 |
| Pump Type | Gear pump |
| Pumping technology | Gear pumps |
| Designation | Part number |
|---|---|
| Pump RPG 9cc (Equipped with bypass block) | 270000154 |
| Pump RPG 6cc (Equipped with bypass block) | 270000153 |
| Pump RPG 4.5cc (Equipped with bypass block) | 270000152 |
| Pump RPG 1.2cc (Equipped with bypass block) | 11000793 |
| Pump RPG 3cc (Equipped with bypass block) | 11000794 |
| Designation | Part number |
|---|---|
| Retrofit kit to install "RPG" instead of "FCG" Pump | 910032531 |
| Retrofit kit to install "RPG" instead of "Easyrincing" Pump (height & coupling) | 910032529 & 900007493AT |
Documents PDF
-
product-RPG-gearpump_en_GB.pdf
Documents Schemas
-
product_nanocoat_RPG_pump_schema2.jpeg
-
product_nanocoat_RPG_pump_schema.jpeg
Linked Products
HVLP/LVLP standards
Let's get in touch-
What is the HVLP standard?
HVLP (High Volume, Low Pressure) refers to a spray technology that uses a high air flow at low pressure. Its goal: To reduce overspray and ensure precise application with excellent finish quality. It’s both cost-effective and eco-friendly, widely recognized for its performance in industries like automotive and woodworking.
-
What is the LVLP standard?
LVLP stands for Low Volume, Low Pressure. It refers to a type of spray technology that uses less air pressure and lower air volume than conventional systems to atomize coatings.
LVLP spray guns are designed to deliver high transfer efficiency (less overspray and material waste), while maintaining good finish quality. They are especially suitable for fine finishing tasks and applications where material savings and environmental control are important.
👉 Note: Always check if your material and process requirements are compatible with LVLP to ensure proper atomization and surface quality.