Sames | 16F240 Airmix® Flowmax® Paint Pump

Description

Heavy duty air changeover valves
Used for circulation and/or multiple guns.
Very large choice of seals and packing materials (GT, PU, UHMW…)

Performance:

♦ High output to feed several guns in circulation
♦ High suction power for materials up to 4,000 cps
♦ Turbo air motor available for continuous 24/7 use

Productivity

♦ Flowmax® bellows technology - total sealing & dust free, no lubricant cup
♦ Ideal for moisture-sensitive catalysts

Sustainability

♦ Triple chrome piston & cylinder, stainless steel ball & carbide seat for long-term use
♦ Sleek design with minimal parts. The inversion system provides a fast changeover for a constant material delivery
♦ Bellow life time 10,000,000 cycles - up to 8 years

No dynamic sealing & provides leak free technology.

Technical data table

Designation	Value	Unit: metric (US)
Pressure Ratio	16/1
Maximum Fluid Pressure	96 (1392)	bar (psi)
Maximum Air Pressure	6 (87)	bar (psi)
Air Consumption	41.5 (24.1)	m³/h (cfm)
Maximum Temperature	50 (131)	°C (°F)
Sealing Packing Bellows Polyethylene	♦
Cylinder	240 (8.11)	cc (oz)
Sound Level	76	dBa
Recommended Air Pressure	2 - 5 (29 - 72.5)	bar (psi)
Fluid Output at 30 cycles/mn	7.2 (1.9)	l/min (gal/mn)
Fluid Output at 20 cycles/mn	4.8 (1.27)	l/mn (gal/mn)
Fluid Volume per Cycle	240 (8.12)	cc
Free Flow Rate	14.4 (3.8)	l/mn (gal/mn)
Fluid Output at 15 cycles / mn	3.6 0.95)	l/mn (gal/mn)
Air Consumption at 30 cycles/mn at 4 bar (60 psi)	41.5	m³/h (cfm)
Displacement Per Cycle	240 (14.64)	cc (cubic inch)
Motor Type	2000-4 / 2000-4T
Air Inlet	F3/8" NPS - M3/4" NPS / F3/4" BSP
Fluid Outlet	M 1/2" NPS / M1/2" JIC
Fluid Inlet	F 1" BSP / M 26 x 125
Number of Cycles per liter of products	4
Sealing Packing Upper and Lower GT polyethylene	♦
Wetted Parts: Hard Chrome SST, Standard SST, Carbide	♦
Weight	32 (70.5)	kg (lbs)

Equipment

Designation	Version	Fluid inlet	Section rod	Drain rod	Paint filter	Air regulator	Seal	Motor	Part number
16F240	wall	M 26x125	-	-	-	-	PE + GT	std	151793000
16F240	wall	M 26x125	-	-	-	2	PE + GT	std	151793100
16F240	wall	M 26x125	25 mm (1'')	♦	♦	2	PE + GT	std	151793200
16F240	Trolley	M 26x125	25 mm (1'')	♦	♦	2	PE + GT	std	151793400
16F240	wall	M 26x125	25 mm (1'')	-	-	2	PE + GT	Turbo	151796100
16F240	wall	M 26x125	25 mm (1'')	♦	♦	2	PE + GT	Turbo	151796200
16F240	wall	M 26x125	25 mm (1'')	♦	♦	2	PU	std	151793260
16F240	wall	M 26x125	25 mm (1'')	♦	♦	2	PU	Turbo	151796260

Accessories

Designation				Part number
Two Post Cart w/o plate				051221000
Pump Mounting Plate with straps				056100199
Stainless steel Suction rod Ø23 M26 plunging tube length elbowed 570 mm				149596150
Stainless steel Suction rod Ø23 M26 plunging tube length 1000mm elbowed (for 200 liters drums)				149596160
Stainless steel drain rod Ø16 elbowed F18 x 125				049596000
Fluid filter 3/8 Mesh 6				155580300

Spare Parts

Designation				Part number
Seal kit for 2000-4 air motor including reversing-block seals				146270990
Full maintenance kit for 2000-4 air motor including reversing-block seals				146270996
Seal kit for F240 hydraulic section				144970490
Full maintenance kit F240 hydraulic section				144970495
Adaptation assembly for Polyurethane (PU) seals				144970260
Seal kit for F240 hydraulic section (PU/PU)				144970270
Ball Ø 16, 316L stainless steel				907414142

Technologies

Turbo Motor

Prevents the formation of ice on the engine of the pump during extensive use.

Flowmax® Feeding

Flowmax® technology guarantees total sealing for leak-free pumps.

GT Sealing

This technology represents a new generation of sealing designed to extend the life of a pump piston.

2 Ball

2 ball pumping technology is highly utilized in fluid sections with one ball / seat for suction & the other ball / seat for feeding.

Triple Chrome Layer

This is a special treatment for very high sustainability & is applied to the piston of the fluid section of a pump.

Documents

Select all documents

Airmix® Catalog 2020 Sames

Format : application/pdf
Size : 7Mo

Select the document

Leaflet 04F240 08F240 16F240 airspray Flowmax® paint pump (English version) Sames

Format : application/pdf
Size : 350Ko

Select the document

General Catalog (only for North American market) Sames

General Catalog North America

Format : application/pdf
Size : 3Mo

Select the document

Instruction Manuals

Select all documents

Materials

Primer Polyurethane Multi-Component

Designed to hide profile & surface imperfections, multi-component polyurethane primers & sealers improve adhesion of top coats to the substrate due to the addition of a hardener.

Primer Water-Based

Designed to hide profile & surface imperfections, water-based primers & sealers are environmentally friendly.

Primer Polyurethane

Designed to hide profile & surface imperfections, polyurethane primers & sealers promote adhesion of top coats to the substrate.

CARC Water-Based

Chemical Agent Resistant Coating (CARC) is available in a water-based solution for environmental protection.

CARC Epoxy Multi-Component

Chemical Agent Resistant Coating (CARC) is a paint commonly applied to military vehicles to provide protection against chemical & biological weapons. The surface of the paint is engineered to be easily decontaminated after exposure to chemical warfare & biological warfare agents. The paint is also resistant to damage & removal by decontaminating solutions.

CARC Polyurethane Multi-Component

Chemical Agent Resistant Coating (CARC) can be two-component polyurethane paint commonly applied to military vehicles to provide protection against chemical & biological weapons.

Moisture-Sensitive Polyurethane Multi-Component

Catalyzed polyurethane clear coats and paints are prized for their durability and versatility around the world. They are used on everything from wood cabinetry, mill work and furniture to planes, trains, and automobiles. They are usually mixed with isocyanates in the hardener. The isocyanate component of polyurethane reacts with moisture in the air and form a hard crystalline structure.

UV Material Epoxy Multi-Component

UV-resistant epoxy systems mixed with hardener cure faster & in moist conditions.

UV Material 100% Solid

UV coatings can be formulated up to 100% solids so that they have no volatile component that contributes to pollution.

UV Material Water-Based

Water-based UV coatings can be considered aesthetically equivalent to bi-component acrylic & polyurethane solvent-based coatings. The range is composed of both pigmented & transparent products.

UV Material Epoxy

UV curable epoxy systems do not require the addition of curing agents. They cure within minutes, or even seconds, and have unlimited working times.

UV Material Polyurethane Multi-Component

The UV polyurethane multi-components are especially designed for very strong UV stability. Mixing with hardener gives very high durability & UV resistance.

UV Material Polyurethane

The UV polyurethanes are especially designed for UV stability, The coating is long lasting, offers excellent substrate protection, provides an attractive finish & is user-friendly.

Top Coat Polyurethane Multi-Component

Polyurethane Top Coat is a two- or three-pack isocyanate-cured polyurethane that gives a durable, high gloss finish. Isocyanates included in the hardener are moisture-sensitive & need a specific process for insulating the circuit.

Top Coat Water-Based

Water-based polyurethane is popular because of its low odor & low toxicity. It goes on clear without adding a faint color like oil-based versions do & it dries much faster.

Top Coat Polyurethane

Polyurethane Top Coat gives a durable, high gloss finish.

Acid Catalyst Polyurethane Multi-Component

Multi-Component Epoxy Acid Catalyzing (AC) systems require a hardener or catalyst to dry/cure, which works by starting & maintaining the binder's curing process until the chemical reaction is complete. The solvent evaporates prior to & during the chemical reaction concluding a final film of lacquer, paint or filler. The catalyst is moisture-sensitive and requires a Flowmax® technology protection.

Acid Catalyst Epoxy Multi-Component

Multi-Component Epoxy Acid Catalyzing (AC) systems require a hardener or catalyst to dry/cure, which works by starting & maintaining the binder's curing process until the chemical reaction is complete. The solvent evaporates prior to & during the chemical reaction concluding a final film of lacquer, paint or filler. Curing times of AC products can be dramatically accelerated with heat application.

Markets