Magma 500 Fluid Heater
- High pressure for heavy duty applications
- Excellent performance even without circulation
- Stainless steel design compatible with most coatings
Magma range is the only heater on the market to offer premium performances for all materials.
Magma heaters can be used in paint kitchens for circulation to maintain a constant temperature for each color or for direct heating (One Pass) to increase the temperature of the paint just before the application. This helps to atomize the paint at a lower pressure and reduces the use of solvents and thinners as heated paint will have a lower viscosity thus reducing VOC emissions. Additionally, the Magma heater can heat the atomizing air for faster drying times and increase finish quality in Airmix® or Airspray applications.
Our Magma heater is available in two sizes – 9mm (0.35in) ID for liquid to semi-viscous materials or a unique High Volume-HV 14mm (0.55in) ID for viscous to paste materials. For optimal safety, the range is fully explosion proof (II 2G Ex db IIB T4 Gb). (not applicable for NA)
When using the MAGMA heaters, the main benefits of heating the material are:
• Higher layer thicknesses can be achieved
• Viscosity adjustment without solvent consumption → reduction of VOC emission
• Lower pump output pressure → long packing lifetime
• Higher finishing quality → especially by using the atomizing air heating option
• Lower drying time
• Uniformity of the application, preserving the fluid line from temperature variations in a workshop
The following materials may be heated:
One reference (440V version) can be controlled with external unit.
|Designation||Value||Unit: metric (US)|
|Height||500 (7250)||mm (in)|
|Width||17.6 (38.8)||mm (in)|
|Recommended Fluid Pressure||85 (185)||bar (psi)|
|Rotation Speed||220 (8.7)||t/mn (rpm)|
|Torque at 100 rpm||405 (16)||Nm|
|Maximum Air Consumption||180 (7)||m3/h (cfm)|
|Designation||Internal Fluid diameter (mm/in)||Fitting IN/OUT||Volt max (V)||Power( W)||Material||Pmax pressure (bar/psi)||Part number|
|MAGMA 500 ID9 W/M HEATER 230V 3500W M1/2 JIC||9 (0.35)||M 1/2 JIC||230||3500||SST||500/7250||156160040|
|MAGMA 500 ID9 W/M HEATER 115V 1800W M1/2 JIC||9 (0.35)||M 1/2 JIC||115||1800||SST||500/7250||156160050|
|MAGMA 500 ID9 W/M HEATER 400V 3800W M1/2 JIC||9 (0.35)||M 1/2 JIC||400||3800||SST||500/7250||156160060|
|MAGMA 500 ID14 HV W/M HEATER 230V 3500W M3/4 JIC||14 (0.55)||M 3/4 JIC||230||3500||SST||500/7250||156160010|
|MAGMA 500 ID14 HV W/M HEATER 115V 1800W M3/4 JIC||14 (0.55)||M 3/4 JIC||115||1800||SST||500/7250||156160020|
|MAGMA 500 ID14 HV W/M HEATER 400V 3800W M3/4 JIC||14 (0.55)||M 3/4 JIC||400||3800||SST||500/7250||156160030|
|MAGMA 500 ID14 HV W/M HEATER 440V 3500W M3/4 JIC||14 (0.55)||M 3/4 JIC||440||3500||SST||500/7250||156160070|
|TEMPERATURE INDICATOR FOR MAGMA 500 ID9||156160110|
|TEMPERATURE INDICATOR FOR MAGMA 500 ID14 HV||156160111|
|KIT FOR HEATING ATOMIZING AIR MAGMA 500||156160114|
|HEAT EXCHANGER KIT FOR MAGMA 500 ID9||156160108|
|HEAT EXCHANGER KIT FOR MAGMA 500 ID14 HV||156160109|
|DIAL THERMOMETER MAGMA 500||156160115|
Since 1975, Airmix® combines conventional and high pressure Airless technologies advantages. It is today's industry standard for medium pressure atomization.
This compliant technology ensures high transfer efficiency (minimum 65%) with reduced atomizing air pressure of 0.7 bar maxi.
Epoxy primer/sealer is a non-porous finish that is typically recommended as the first base coat over bare steel.
Polyurethane Sealant is abrasion resistant, odorless, remains flexible at low temperatures & is 100% urethane. It's quick & simple to use with its fast-setting capabilities that help to reduce downtime. The balanced, low-viscosity liquid components form an easy-to-use paste.
Polyurethane Two-Component Sealant can be used in two or three components for increasing mechanical & chemical capabilities.
Some anti-corrosion materials are available in water-based versions. These green paints have a longer dry time, but meet most environmental requirements & have excellent protective qualities.
The Anti-Corrosion Epoxy Multi-Component product is highly resistant to marine & industrial environments, buried conditions, ground water, effluents, salt water & a wide range of oils & chemicals.
Solvent-free epoxy coatings are designed for long-term protection of steel & concrete structures against corrosion, abrasion & chemical attack. Operating temperature ranges from –40F to 1040F.
A two-component efficient coating product, used as first layer on metallic surfaces & in a wide range of painting systems. Forms an excellent quality anti-corrosive polyurethane film, ensuring the adherence between the surface & the next layer of the painting process.
Bitumen is an oil-based substance. It is a semi-solid hydrocarbon product produced by removing the lighter fractions (such as liquid petroleum gas, petrol & diesel) from heavy crude oil during the refining process.
Used for the steel structures of steel pipeline, steel frame, bridge & plant facilities for effective, long-term substrate protection.
Polyurethane coatings are often used for the corrosion protection of steel because they are particularly economical to apply. They dry quickly & can therefore be over-coated in short intervals. They can also be applied independently of the weather conditions & are resistant to impact.
Sound deadeners remove noise & unwanted vibrations by converting them into low grade heat & adding lightweight mass. The back-and-forth vibrations, or mechanical energy, are converted to low level thermal energy or heat, thereby providing structural resonance & impact noise deterrence.
Catalyzed polyurethane clear coats and paints are prized for their durability and versatility around the world. They are used on everything from wood cabinetry, mill work and furniture to planes, trains, and automobiles. They are usually mixed with isocyanates in the hardener. The isocyanate component of polyurethane reacts with moisture in the air and form a hard crystalline structure.
A two-component 100%-solid epoxy blended with metallic pigments, Metal Fusion is self-leveling, allowing easy application & seamless floor surfaces.
Subcontractors of the surface treatment and the coating process for the general industry