05C31 Liquid glue solution

Thanks to its immersive construction, the 05C31 has a maximized suction power for material viscosity up to 15 000 cps. Specially designed with incorporated suction valve on the foot for glue or liquid sealant, this pump is also compatible with paint.

3-in-1 pump: Glue, adhesive, paint - Optimum performance!

Stainless steel construction
Efficient suction power
High compression ratio enabling long distances between drum and application

Where to buy?

Description

Stainless steel construction
Efficient suction power
High compression ratio enabling long distances between drum and application

PERFORMANCE

1 Optimized air motor operating at less than one bar
♦ Very fast reversing for high flowrate.
2 Full stainless steel fluid section: perfectly adapted to a wide range of materials including waterborne.

PRODUCTIVITY

3 Large foot valve with 3/4 BSPP inlet delivering enough suction power to handle a large range of material viscosity.
4 Optimal section length of 380 mm compatible with major 20-40 L drum.
5 Closed construction decreases the risk of injuries and protect lubricant from external contamination.

SUSTAINABILITY

3 Easy servicing with direct access to the suction valve.
♦ Easy coupling for a quick dissasembling.
♦ No external air distributor allows 45% less part vs competitors for a better maintenance.
♦ Triple chrome-plated piston parts to minimize wearing.
♦ Single GT seal, no throat packing maintenance insuring low friction.

05C31 piston pump is based on 80 years of Sames technical expertise, innovation and dedication to our customers. This pump is designed to apply a large range of materials while reducing labor and maintenance costs and articulates around 3 strong themes: Efficiency, Optimization and Simplicity.

05C31 is available under three distinct configurations tailored to different use cases:

1. Fully equipped Mobile solution, providing maximum flexibility, allowing easy relocation across different workstations.

2. Drum lid-mounted system, designed for seamless drum changes enabling quick and hassle free replacement of drums on-site

3. Entry model tripod model. this model is perfect for smaller-scale operations for users looking for a cost-effective solution.

Technical data table

Designation	Value	Unit: metric (US)
Pressure Ratio	5/1
Maximum Fluid Pressure	30 (435)	bar (psi)
Maximum Air Pressure	6 (87)	bar (psi)
Air Consumption	1.6 (0.94)	m³/h (cfm)
Viscosity	15 000 cps	cps
Maximum Temperature	50 (120)	°C (°F)
Sound Level	77	dBa
Fluid Output at 30 cycles/mn	0.9 (0.23)	l/min (gal/mn)
Fluid Volume per Cycle	31 (1.05)	cc
Free Flow Rate	6 (1.58)	l/mn (gal/mn)
Hard Chrome Stainless Steel, Wetted Parts	♦
Sealing Packing Upper GT cartridge with polyethylene packing	♦
Height	66.5 (26.2)	cm (in)
Width	12 (4.7)	cm (in)
Depth	12 (4.7)	cm (in)
Weight	9.5 (21,50)	kg (lbs)
ATEX Certification	CE-UKCA II2G Ex h IIB T4 Gb X

Equipment

Designation						Part number
PUMP 05C31 BARE						144980000
Pump 05C31 Wall-mounted						144980200

Accessories

Designation						Part number
Essential Stand						151730130
Fitting MM 3/4 BSPP M18x125						050102429
Suction hose ID 19 M18 length 1500mm without tube						149596250
Stainless Steel Suction rod Ø16 M26 plunging tube length 570 mm elbowed						149596050
Stainless Steel Suction rod Ø16 M26 plunging tube length 1000mm elbowed (for 200 liters drums)						149596060
Fitting MM 3/4 BSPP M26x125						050102407
Stainless steel Suction rod Ø23 M26 plunging tube length elbowed 570 mm						149596150
Stainless steel Suction rod Ø23 M26 plunging tube length 1000mm elbowed (for 200 liters drums)						149596160
Single post cart						151730140

Kits

Designation	Assembly	Air supply	Part number
KIT 05C31 WITH TROLLEY AND AIR PLATE FOR PUMP	Trolley	V	154980000
KIT 05C31 WITH DRUM COVER 20-40L W/O AIR PLATE	Drum lid	-	154980001
KIT 05C31 + 3 LEGS BASIC TRIPOD W/O AIR PLATE	3 legs tripod		154980002

Spare Parts

Designation						Part number
Servicing kit for air motor 340/2						144850150
Stainless Steel Cartridge with GT seal						144030157
Seals kit for C31 hydraulic						144790090
Full maintenance kit C31 hydraulic section						144790095
Handle						051665651

Technologies

GT Sealing

This technology represents a new generation of sealing designed to extend the life of a pump piston.

Cup Lub

A pump has a cup filled with lubricant at the top of the liquid section.

2 Ball

2 ball pumping technology is highly utilized in fluid sections with one ball / seat for suction & the other ball / seat for feeding.

Documents

Select all documents

05C31 Airspray

Format : application/pdf
Size : 337Ko

Select the document

Instruction Manuals

Select all documents

Materials

Primer Epoxy

Epoxy primer/sealer is a non-porous finish that is typically recommended as the first base coat over bare steel.

Primer Water-Based

Designed to hide profile & surface imperfections, water-based primers & sealers are environmentally friendly.

Adhesive Hybrid

Hybrid Adhesive Sealants are one component formulations that form robust, permanent & flexible bonds offering great adhesion to many materials for reliable performance, are paintable when wet for fast process time, have a fast skin time for a tack-free surface, are isocyanate-free for reduced health & safety concerns & resist degradation from sunlight for excellent aesthetics.

Adhesive Acrylic

Adhesive acrylics were developed for structural bonding applications that require tensile, shear & peel strength combined with maximum impacts, stress & shock resistance.

Water-Based Stains

Water-Based Wood Stains have all the advantages of oil-based stains. They spread easily, can be repaired, blend effortlessly & have plenty of open time. The thicker formula allows for controlled penetration, which will reduce blotching on softer woods such as Aspen, Pine & Maple.

Solvent-Based Stains

A wood stain consists of a colorant suspended or dissolved in an agent or solvent. Colored, or ''stained", finishes do not penetrate the pores of the wood to any significant degree.

Top Coat Polyurethane Multi-Component

Polyurethane Top Coat is a two- or three-pack isocyanate-cured polyurethane that gives a durable, high gloss finish. Isocyanates included in the hardener are moisture-sensitive & need a specific process for insulating the circuit.

Top Coat Water-Based

Water-based polyurethane is popular because of its low odor & low toxicity. It goes on clear without adding a faint color like oil-based versions do & it dries much faster.