Sames | 20C50 Airmix® Paint Pump

Description

Suction rod or gravity hopper.
Heavy duty air changeover valves.
Good chemical compatibility with GT, Chevron, PE seals.

► Technical manual

Performance:

♦Economical with low air consumption
♦Quiet air motor to preserve work environment

Productivity:

♦Construction without dead zones for quick flushing & product changes
♦The mobile seal located on the piston ensures the mechanical cleaning of the fluid section internal wall during pump runs
♦Lower mobile single lip packing (GT) reducing friction for improved efficiency

Sustainability:

♦Fewer parts & simple design for extended lifetime
♦Polyfluid and PTFE graphite seal for improved wear resistance
♦Triple chrome layer piston for exceptional durability

Our wide selection of accessories allows you to create various configurations to meet your customer requirements.

Technical data table

Designation	Value	Unit: metric (US)
Pressure Ratio	20/1
Maximum Fluid Pressure	120 (1740)	bar (psi)
Maximum Air Pressure	6 (87)	bar (psi)
Air Consumption	10.8 (6.4)	m³/h (cfm)
Maximum Temperature	60 (140)	°C (°F)
Cylinder	50 (1.69)	cc (oz)
Sound Level	78	dBa
Recommended Air Pressure	2 - 5 (29 - 72.5)	bar (psi)
Fluid Output at 30 cycles/mn	1.5 (0.4)	l/min (gal/mn)
Fluid Output at 20 cycles/mn	1.0 (0.26)	l/mn (gal/mn)
Fluid Volume per Cycle	50	cc
Free Flow Rate	3.0 (0.78)	l/mn (gal/mn)
Fluid Output at 15 cycles / mn	0.75 (0.2)	l/mn (gal/mn)
Air Consumption at 30 cycles/mn at 4 bar (60 psi)	10.8	m³/h (cfm)
Displacement Per Cycle	50 (3.05)	cc (cubic inch)
Motor Type	500-4
Air Inlet	F3/8" BSP / F3/8" BSP
Fluid Outlet	F1/2" NPS / M1/2" JIC
Fluid Inlet	F 1/2" BSP / M26x125
Number of Cycles per liter of products	20
Sealing Packing Upper PTFE G - Polyfluid	♦
Height	82 (32.2)	cm (in)
Width	35 (13.8)	cm (in)
Depth	21 cm (8.3)	cm (in)
Wetted Parts: Hard Chrome SST, Standard SST, Carbide	♦
Weight	17 (37.5)	kg (lbs)

Equipment

Designation	Setup	Fluid inlet	Suction rod	Drain rod	Paint filter	Air regulator	Upper Seal	Lower Seal	Part number
20C50 BARE PUMP	Bare	F 1/2 BSPP	-	-	-	-	Chevron	GT	151770000
20C50 PUMP W/M WITH FILTER AND RODS	Wall	M 26x125	Ø 23	♦	♦	2	Chevron	GT	151770100
20C50 PUMP W/M W/O FILTER WITH SUCTION ROD	Wall	M 26x125	Ø 23	-	-	2	Chevron	GT	151770200

Accessories

Designation			Part number
Wall mounted support for bare pump			044910121
Two Post Cart w/o plate			051221000
Pump Mounting Plate with straps			056100199
Gravity hopper 6 liters			151140230
Stainless steel Suction rod Ø23 M26 plunging tube length elbowed 570 mm			149596150
Stainless steel Suction rod Ø23 M26 plunging tube length 1000mm elbowed (for 200 liters drums)			149596160
Stainless steel drain rod Ø16 elbowed F18 x 125			049596000
Fluid filter 3/8 Mesh 6			155580300

Kits

Designation	Maximum output pressure(bar (psi))	Gun type	Tip	Hoses included	Swivel fitting	Mounting	Packing material	Output filter	Suction rod	Part number
KIT 20C50 WALL-MOUNTED & Xcite®+ 120B & HOSE 7.5M	120 (1740)	Xcite®+ 120	-	7.5 m (24 ft)	•	Wall	Chevron	•	Ø 23	151260966

Spare Parts

Designation				Part number
Seal kit for 500-4 air motor				146260990
Maintenance kit for 500-4 air motor				146260995
Seal kit for C50 hydraulic section (Chevron/GT)				144950091
Full maintenance kit C50 hydraulic section (Chevron/GT)				144950096
Seal kit for C50 hydraulic section (Chevron/Chevron)				144950090
Full maintenance kit C50 hydraulic section (Chevron/Chevron)				144950095
Chevron seal, PE				909051103
Ball Ø 16, 316L stainless steel				907414142
Ball Ø 9,52, 316L stainless steel				907414623

Technologies

Chevron Sealing

A Chevron packing set independently reacts to pressure & automatically affects a seal.

Cup Lub

A pump has a cup filled with lubricant at the top of the liquid section.

2 Ball

2 ball pumping technology is highly utilized in fluid sections with one ball / seat for suction & the other ball / seat for feeding.

Triple Chrome Layer

This is a special treatment for very high sustainability & is applied to the piston of the fluid section of a pump.

Documents

Select all documents

20C50

Format : application/pdf
Size : 490Ko

Select the document

Airmix® Catalog 2020 Sames

Format : application/pdf
Size : 7Mo

Select the document

General Catalog (For North America only) Sames

General Catalog North America

Format : application/pdf
Size : 3Mo

Select the document

Instruction Manuals

Select all documents

Materials

Primer Polyurethane Multi-Component

Designed to hide profile & surface imperfections, multi-component polyurethane primers & sealers improve adhesion of top coats to the substrate due to the addition of a hardener.

Primer Water-Based

Designed to hide profile & surface imperfections, water-based primers & sealers are environmentally friendly.

Primer Polyurethane

Designed to hide profile & surface imperfections, polyurethane primers & sealers promote adhesion of top coats to the substrate.

CARC Water-Based

Chemical Agent Resistant Coating (CARC) is available in a water-based solution for environmental protection.

CARC Epoxy Multi-Component

Chemical Agent Resistant Coating (CARC) is a paint commonly applied to military vehicles to provide protection against chemical & biological weapons. The surface of the paint is engineered to be easily decontaminated after exposure to chemical warfare & biological warfare agents. The paint is also resistant to damage & removal by decontaminating solutions.

CARC Polyurethane Multi-Component

Chemical Agent Resistant Coating (CARC) can be two-component polyurethane paint commonly applied to military vehicles to provide protection against chemical & biological weapons.

Top Coat Polyurethane Multi-Component

Polyurethane Top Coat is a two- or three-pack isocyanate-cured polyurethane that gives a durable, high gloss finish. Isocyanates included in the hardener are moisture-sensitive & need a specific process for insulating the circuit.

Top Coat Water-Based

Water-based polyurethane is popular because of its low odor & low toxicity. It goes on clear without adding a faint color like oil-based versions do & it dries much faster.

Top Coat Polyurethane

Polyurethane Top Coat gives a durable, high gloss finish.

Acid Catalyst Polyurethane Multi-Component

Multi-Component Epoxy Acid Catalyzing (AC) systems require a hardener or catalyst to dry/cure, which works by starting & maintaining the binder's curing process until the chemical reaction is complete. The solvent evaporates prior to & during the chemical reaction concluding a final film of lacquer, paint or filler. The catalyst is moisture-sensitive and requires a Flowmax® technology protection.

Acid Catalyst Epoxy Multi-Component

Multi-Component Epoxy Acid Catalyzing (AC) systems require a hardener or catalyst to dry/cure, which works by starting & maintaining the binder's curing process until the chemical reaction is complete. The solvent evaporates prior to & during the chemical reaction concluding a final film of lacquer, paint or filler. Curing times of AC products can be dramatically accelerated with heat application.

Markets