The 30C25 Airmix® paint pump delivers excellent performance and outstanding benefits because of our proven pumping technology. The 30C25 compact Airmix® paint pump is recommended to handle all types of materials ranging from low to medium viscosity. It comes with an optimized volume fluid section for fast color changes with minimal material loss.
The 30C25 Airmix® paint pump packages are available in wall-mount versions with stand mounting as an option. Packages are available with (1) Airmix® Xcite® 240 manual spray gun and 7.5 m (25ft) air and fluid hoses. A wide variety of options are available to meet all customer requirements.
| Designation | Value | Unit: metric (US) |
|---|---|---|
| Pressure Ratio | 30/1 | |
| Maximum Fluid Pressure | 180 (2610) | bar (psi) |
| Maximum Air Pressure | 6 (87) | bar (psi) |
| Air Consumption | 7.1 (4.18) | m³/h (cfm) |
| Maximum Temperature | 60 (140) | °C (°F) |
| Cylinder | 25 (0.84) | cc (oz) |
| Weighted Sound Level | 74.9 | dBA |
| Recommended Air Pressure | 2 - 5 (29 - 72.5) | bar (psi) |
| Fluid Output at 30 cycles/mn | 0.75 (0.2) | l/min (gal/mn) |
| Fluid Output at 20 cycles/mn | 0.5 (0.13) | l/mn (gal/mn) |
| Fluid Volume per Cycle | 25 | cc |
| Free Flow Rate | 1.5 (0.39) | l/mn (gal/mn) |
| Fluid Output at 15 cycles / mn | 0.375 (0.01) | l/mn (gal/mn) |
| Air Consumption at 30 cycles/mn at 4 bar (60 psi) | 7.1 | m³/h (cfm) |
| Displacement Per Cycle | 25 (1.52) | cc (cubic inch) |
| Motor Type | 420-4 | |
| Air Inlet | F3/8" BSP / F3/8" BSP | |
| Fluid Outlet | F3/8" NPS / M1/2" JIC | |
| Fluid Inlet | F 1/2 " BSP / M26x125 | |
| Hard Chrome Stainless Steel, Wetted Parts | ♦ | |
| Number of Cycles per liter of products | 40 | |
| Sealing Packing Upper GT cartridge with polyethylene packing | ♦ | |
| Height | 57.5 (22.6) | cm (in) |
| Width | 32 (12.6) | cm (in) |
| Depth | 17 (6.69) | cm (in) |
| Wetted Shares: Stainless Steel | ♦ | |
| Weight | 7.7 (17) | kg (lbs) |
| Designation | Version | Fluid inlet | Suction rod | Paint filter | Air regulator | Seal | Part number |
|---|---|---|---|---|---|---|---|
| 30C25 PUMP W/O FILTER W/O SUCTION ROD | Wall | M 26x125 | - | - | 2 | GT | 151145000 |
| 30C25 PUMP W/O FILTER WITH SUCTION ROD | Wall | M 26x125 | 16 mm (5/8'') | - | 2 | GT | 151145100 |
| 30C25 PUMP W/O FILTER, WITH SUCTION ROD DIAM 25 | Wall | M 26x125 | 25 mm (1'') | - | 2 | GT | 151145150 |
| 30C25 PUMP WITH FILTER & SUCTION ROD DIAM 16 | Wall | M 26x125 | 16 mm (5/8'') | ♦ | 2 | GT | 151145200 |
| 30C25 PUMP WITH FILTER & SUCTION ROD DIAM 25 | Wall | M 26x125 | 25 mm (1'') | ♦ | 2 | GT | 151145250 |
| 30C25 PUMP W/O FILTER W/O SUCT ROD FLUID INLET F1/2 | Wall | F 1/2 BSP | - | - | 2 | GT | 151145320 |
| 30C25 PUMP MB-A ASP. M26x125 WO FILTER WO ROD | Wall | M 26x125 | - | - | 2 | MB-A | 151145400 |
| 30C25 PUMP MB-A ASP. F1/2 WO FILTER WO ROD | Wall | F 1/2 BSP | - | - | 2 | MB-A | 151145450 |
| 30C25 PUMP MB-A ASP. M26x125 WO FILTER WITH ROD D16 | Wall | M 26x125 | 16 mm (5/8'') | - | 2 | MB-A | 151145550 |
| 30C25 PUMP MB-A ASP. M26x125 WO FILTER WITH ROD D25 | Wall | M 26x125 | 25 mm (1'') | ♦ | 2 | MB-A | 151145600 |
| 30C25 PUMP MB-A ASP. M26x125 WO FILTER WITH ROD D25 | Wall | M 26x125 | 25 mm (1'') | - | 2 | MB-A | 151145650 |
| 30C25 PUMP MB-A ASP. M26x125 WITH FILTER WITH ROD D16 | Wall | M 26x125 | 16 mm (5/8'') | ♦ | 2 | MB-A | 151145700 |
| Designation | Part number | |||
|---|---|---|---|---|
| Wall-mounted totem | 151140240 | |||
| Tripod | 151140210 | |||
| Dismountable trolley | 151241000 | |||
| Stainless Steel Suction rod Ø16 M26 plunging tube length 570 mm elbowed | 149596050 | |||
| Stainless Steel Suction rod Ø16 M26 plunging tube length 1000mm elbowed (for 200 liters drums) | 149596060 | |||
| Stainless steel Suction rod Ø23 M26 plunging tube length elbowed 570 mm | 149596150 | |||
| Stainless steel Suction rod Ø23 M26 plunging tube length 1000mm elbowed (for 200 liters drums) | 149596160 | |||
| Stainless steel drain rod Ø16 elbowed F18 x 125 | 049596000 | |||
| Gravity hopper 6 liters | 151140230 | |||
| Fluid filter Mesh 6 3/8 (Inlet F1/2"JIC - Outlet M1/2"JIC) | 155580600 |
| Designation | Maximum output pressure(bar (psi)) | Gun type | Tip | Hoses included | Swivel fitting | Mounting | Packing material | Output filter | Suction rod | Part number |
|---|---|---|---|---|---|---|---|---|---|---|
| W/M PACK AIRMIX® PUMP 30C25 NO FILTER+SUCTION ROD+Xcite®+240B | 180 (2610) | Xcite®+ 240 | - | 7.5 m (24 ft) | • | Wall | GT | - | Ø 16 | 151260975 |
| W/M PACK AIRMIX® PUMP 30C25 NO FILTER W/O SUCT ROD+Xcite®+240B | 180 (2610) | Xcite®+ 240 | - | 7.5 m (24 ft) | • | Wall | GT | - | - | 151260977 |
| W/M PACK AIRMIX® PUMP 30C25 & FILTER & SUCTION ROD+Xcite®+240B | 180 (2610) | Xcite®+ 240 | - | 7.5 m (24 ft) | • | Wall | GT | • | Ø 23 | 151260978 |
| W/M PACK AIRMIX® PUMP 30C25 NO FILT+SUC ROD&XCITE®+240 NO SWI | 180 (2610) | Xcite®+ 240 | - | 7.5 m (24 ft) | - | Wall | GT | - | Ø 23 | 151261002 |
| AIRMIX® PACK W/M 30C25 MBA NO FILT W/O SUC XCITE®+240 SWI H7.5 | 180 (2610) | Xcite®+ 240 | - | 7.5 m (24 ft) | • | Wall | MB-A | - | - | 151265008 |
| AIRMIX® PACK W/M 30C25 MBA NO FILT SUC D16 XCITE®+240 SWI H7.5 | 180 (2610) | Xcite®+ 240 | - | 7.5 m (24 ft) | • | Wall | MB-A | - | Ø 16 | 151265007 |
| AIRMIX® PACK W/M 30C25 MBA NO FILT SUC D25 XCITE®+240 H7.5 | 180 (2610) | Xcite®+ 240 | - | 7.5 m (24 ft) | - | Wall | MB-A | - | Ø 23 | 151265010 |
| AIRMIX® PACK W/M 30C25 MBA SUC D23 XCITE®+240 SWI H7.5 | 180 (2610) | Xcite®+ 240 | - | 7.5 m (24 ft) | • | Wall | MB-A | - | Ø 23 | 151265009 |
| Designation | Part number | |||
|---|---|---|---|---|
| Servicing kit for 420-4 air motor | 144130190 | |||
| GT Cartridge kit | 144130205 | |||
| GT cartridge and piston kit | 144130289 | |||
| MB-A Cartridge kit | 144130365 | |||
| MB-A cartridge and piston kit | 144130389 | |||
| Servicing kit C25 fluid section | 144130291 |
Format : application/pdf
Size : 524Ko
Format : application/pdf
Size : 7Mo
Format : application/pdf
Size : 3Mo
Format : application/pdf
Size : 663Ko
Format : application/pdf
Size : 845Ko
