Sames | 40C50 Airless Paint Pump

Description

Ideal for Airless applications
High efficiency pump for maximum energy savings
Optimized construction for simple & quick maintenance

Performance:

♦ Economical with low air consumption
♦ Quiet air motor to preserve work environment
♦ air motor sizes available to deliver the product at the right pressure for high quality finish

Productivity:

♦ Construction without dead zones for quick flushing & product changeovers
♦ Mobile seal located on the piston ensures mechanical cleaning of the fluid section internal wall during pump run
♦ Lower mobile single lip packing (GT) for improved efficiency & reduced friction

Sustainability:

♦ Simple design with fewer parts for extended lifetime
♦ Polyfluid & PTFE graphite seal for improved wear resistance
♦ Triple chrome layer piston for exceptional durability

A large choice of accessories allows you to create various configurations to meet all customer requirements.

Technical data table

Designation	Value	Unit: metric (US)
Pressure Ratio	40:1
Maximum Fluid Pressure	240 (3480)	bar (psi)
Maximum Air Pressure	6 (87)	bar (psi)
Air Consumption	21.6 (12.7)	m³/h (cfm)
Maximum Temperature	60 (140)	°C (°F)
Cylinder	50 (1.7)	cc (oz)
Sound Level	77	dBa
Fluid Output at 30 cycles/mn	1.5 (0.4)	l/min (gal/mn)
Air Inlet	F 3/4" BSP
Fluid Outlet	M 1/2" JIC
Fluid Inlet	M 26 x x125
Weight	22 (48.5)	kg (lbs)

Equipment

Designation	Version	Fluid inlet	Suction rod	Drain rod	Paint filter	Air regulator	Seal	Part number
40C50 Airless Bare pump	wall	M 26x125	-	-	-	0	GT + PTFEG	151775000
40C50 PUMP W/M W/O FILTER W/O SUCTION ROD	wall	M 26x125	-	-	-	1	GT + PTFEG	151775050
40C50 PUMP W/M W/O FILTER WITH SUCTION ROD DIAM 25	wall	M 26x125	25 mm (1'')	-	-	1	GT + PTFEG	151775100
40C50 PUMP W/M WITH FILTER W/O SUCTION ROD DIAM 25	wall	M 26x125	25 mm (1'')	-	-	1	GT + PTFEG	151775150
40C50 PUMP W/M WITH FILTER AND SUCTION ROD DIAM 23	wall	M 26x125	25 mm (1'')	♦	♦	1	GT + PTFEG	151775200
40C50 PUMP TROLLEY WITH FILTER AND SUCTION ROD DIAM 25	Trolley	M 26x125	25 mm (1'')	♦	♦	1	GT + PTFEG	151775400

Accessories

Designation		Part number
Stainless steel drain rod Ø16 elbowed F18 x 125		049596000
Two Post Cart w/o plate		051221000
Pump Mounting Plate with straps		056100199
Stainless steel Suction rod Ø23 M26 plunging tube length elbowed 570 mm		149596150
Stainless steel Suction rod Ø23 M26 plunging tube length 1000mm elbowed (for 200 liters drums)		149596160
Gravity hopper 6 liters		151140230
Single post cart		151730140
AIR REGULATOR KIT FOR AIRMIX SPRAYING		151740200

Kits

Designation	Maximum output pressure(bar (psi))	Gun type	Tip	Hoses included	Swivel fitting	Mounting	Packing material	Output filter	Suction rod	Part number
PACK 40C50 PUMP W/M + SFLOW 275B	240 (3480)	Xcite®+ 240	-	7.5 m (24 ft)	•	Wall	Chevron	•	Ø 23	151265105
KIT 40C50 WALL-MOUNTED & Xcite®+ 240B & HOSE 7.5M										151260968

Spare Parts

Designation		Part number
Seal kit for C50 hydraulic section (Chevron/GT)		144950091
Full maintenance kit C50 hydraulic section (Chevron/GT)		144950096
Seal kit for 1000-4 air motor		146270991
Full maintenance kit for 1000-4 air motor		146270995

Technologies

Chevron Sealing

A Chevron packing set independently reacts to pressure & automatically affects a seal.

GT Sealing

This technology represents a new generation of sealing designed to extend the life of a pump piston.

Cup Lub

A pump has a cup filled with lubricant at the top of the liquid section.

2 Ball

2 ball pumping technology is highly utilized in fluid sections with one ball / seat for suction & the other ball / seat for feeding.

Triple Chrome Layer

This is a special treatment for very high sustainability & is applied to the piston of the fluid section of a pump.

Documents

Select all documents

Catalog Airless Range Sames (English version)

Format : application/pdf
Size : 10Mo

Select the document

General Catalog (For North America only) Sames

General Catalog North America

Format : application/pdf
Size : 3Mo

Select the document

Instruction Manuals

Select all documents

40C50 | User manual

Format : application/pdf
Size : 2Mo

Select the document

Materials

Primer Epoxy

Epoxy primer/sealer is a non-porous finish that is typically recommended as the first base coat over bare steel.

Primer Epoxy Multi-Component

Epoxy primer/sealer multi-component is a non-porous finish base mixed with a hardener that is typically recommended as the first base coat over bare steel.

Primer Polyurethane Multi-Component

Designed to hide profile & surface imperfections, multi-component polyurethane primers & sealers improve adhesion of top coats to the substrate due to the addition of a hardener.

Primer Water-Based

Designed to hide profile & surface imperfections, water-based primers & sealers are environmentally friendly.

Primer Polyurethane

Designed to hide profile & surface imperfections, polyurethane primers & sealers promote adhesion of top coats to the substrate.

Anti-Corrosion Water-Based

Some anti-corrosion materials are available in water-based versions. These green paints have a longer dry time, but meet most environmental requirements & have excellent protective qualities.

Anti-Corrosion Epoxy Multi-Component

The Anti-Corrosion Epoxy Multi-Component product is highly resistant to marine & industrial environments, buried conditions, ground water, effluents, salt water & a wide range of oils & chemicals.

Anti-Corrosion Epoxy Free Solvent

Solvent-free epoxy coatings are designed for long-term protection of steel & concrete structures against corrosion, abrasion & chemical attack. Operating temperature ranges from –40F to 1040F.

Anti-Corrosion Polyurethane Multi-Component

A two-component efficient coating product, used as first layer on metallic surfaces & in a wide range of painting systems. Forms an excellent quality anti-corrosive polyurethane film, ensuring the adherence between the surface & the next layer of the painting process.

Anti-Corrosion Epoxy

Anti-Corrosion Epoxy is applied for active anti-corrosive & anti-rust protection of iron & steel surfaces that are to be coated. It is extremely hard & resistant to friction. It is particularly resistant to diluted acids, alkalis, petroleum products, some solvents, water, sea water, and more.

Anti-Corrosion Epoxy High Solid

Used for the steel structures of steel pipeline, steel frame, bridge & plant facilities for effective, long-term substrate protection.

Anti-Corrosion Polyurethane

Polyurethane coatings are often used for the corrosion protection of steel because they are particularly economical to apply. They dry quickly & can therefore be over-coated in short intervals. They can also be applied independently of the weather conditions & are resistant to impact.

CARC Water-Based

Chemical Agent Resistant Coating (CARC) is available in a water-based solution for environmental protection.

CARC Epoxy Multi-Component

Chemical Agent Resistant Coating (CARC) is a paint commonly applied to military vehicles to provide protection against chemical & biological weapons. The surface of the paint is engineered to be easily decontaminated after exposure to chemical warfare & biological warfare agents. The paint is also resistant to damage & removal by decontaminating solutions.

CARC Polyurethane Multi-Component

Chemical Agent Resistant Coating (CARC) can be two-component polyurethane paint commonly applied to military vehicles to provide protection against chemical & biological weapons.

UV Material Epoxy Multi-Component

UV-resistant epoxy systems mixed with hardener cure faster & in moist conditions.

UV Material 100% Solid

UV coatings can be formulated up to 100% solids so that they have no volatile component that contributes to pollution.

UV Material Water-Based

Water-based UV coatings can be considered aesthetically equivalent to bi-component acrylic & polyurethane solvent-based coatings. The range is composed of both pigmented & transparent products.

UV Material Epoxy

UV curable epoxy systems do not require the addition of curing agents. They cure within minutes, or even seconds, and have unlimited working times.

UV Material Polyurethane Multi-Component

The UV polyurethane multi-components are especially designed for very strong UV stability. Mixing with hardener gives very high durability & UV resistance.

UV Material Polyurethane

The UV polyurethanes are especially designed for UV stability, The coating is long lasting, offers excellent substrate protection, provides an attractive finish & is user-friendly.

Top Coat Polyurethane Multi-Component

Polyurethane Top Coat is a two- or three-pack isocyanate-cured polyurethane that gives a durable, high gloss finish. Isocyanates included in the hardener are moisture-sensitive & need a specific process for insulating the circuit.

Top Coat Epoxy

Top Coat Epoxys are used for decorative flooring applications, such as Terrazzo flooring, chip flooring & colored aggregate flooring.

Top Coat Epoxy Multi-Component

Two-part epoxy coatings were developed for heavy duty service on metal substrates & use less energy than heat-cured.

Top Coat Water-Based

Water-based polyurethane is popular because of its low odor & low toxicity. It goes on clear without adding a faint color like oil-based versions do & it dries much faster.

Top Coat Polyurethane

Polyurethane Top Coat gives a durable, high gloss finish.

Markets

Machine Tools

Protection & finishing applications

Containers

Protective coating for sea containers

Coil Coating

Liquid & powder coating on metallic coils

Cab

Protection, finishing, bonding & sealing solutions for cabs

Solar Energy

Bonding & sealing applications for solar panels & cells

Piping

Anti-corrosion & protective coating for piping structures

Handling Machines

Protective & finishing coating for handling & lifting machines

Marine Energy

Protective & anti-corrosion coating for sea power plant machines

Gas Tanks & Bottles

Liquid & powder protective coating for gas bottles & tanks

Wind Energy

Protective coating for windmill parts & components

Steel Drums

Protection, sealing & finishing for steel drums

Kitchen & Bath

Preparation & finishing for kitchen & bath market

Coffins

Bonding & finishing solutions for coffins

Aluminum Extrusions

Finishing & protective coatings

Cranes

Finishing & protective solutions

Harbor Lift Equipment

Anti-corrosion protection

Mining Machines

Protection, finishing, bonding & sealing for mining machinery

Steel Profile

High Performance Fluoropolymer liquid paint (PVDF) & powder coating

Forest Machines

Protection & finishing of forest machinery

Earth Moving Machines

Protection & finishing spray applications

Tractors

Protection, finishing, bonding & sealing for tractors

Harvesters

Protection, finishing, bonding & sealing for harvesters

Farming Trailers

Protection, finishing, bonding & sealing solutions for farming trailers

Sprayers

Protection, finishing, bonding & sealing for sprayers

Metallic Furniture

Liquid & powder paint coating for metallic furniture

Truck Cabs

Protection, finishing, bonding & sealing solutions for truck cabs

Railways

Protective coating, sealing & bonding applications for railway vehicles & parts

Cargo & Tankers

Anti-corrosion & protective coating for marine ships

Recreational Vehicles

Bonding & sealing solutions for recreational vehicles

Yachting

Protective & finishing coating for yacht & sea vessels

Bus

Protection, finishing, bonding & sealing solutions for bus

Cruise Ships

Protective coating & finishing for cruise ships

Road Trailers

Anti-corrosion & protective coating for road trailers

Solutions

1 color & guns on reciprocator

This advanced solution is delivering paint & solvent to two guns mounted on reciprocator machine.

Heated colors for automatic spray gun

This simple concept is delivering different color to several automatic guns with temperature management.

EasyPaint Robot - gun version

Robotic painting solutions for every industry.

40C50 Airless Paint Pump

Performance:

​Productivity:

Sustainability:

Technical data table

Catalog Airless Range Sames (English version)

General Catalog North America

40C50 | User manual

Navigation

Follow us !

Productivity: