NANOBELL 801 Automatic Non-electrostatic rotary bell atomizer
- Premium Finishing Application
- High Transfer Efficiency - Low Overspray
- Safe & Easy Installation - No High Voltage
Premium Finishing Application
Renowned range of magnetic bell cups associated with NW (Narrow to Wide) air shroud from the unsurpassed expertise of Sames in Automotive industry allows taking advantage of the highest application quality.
High Transfer Efficiency - Low Overspray
Sames bell-spraying technology increases the transfer efficiency allowing huge savings (up to 30%) in Paint Consumption compared to conventional Airspray gun.
Safe & Easy Installation - No HighVoltage
The non-electrostatic aspect brings a Safe & Easy Concept for integration, operation and maintenance whatever the material sprayed; either solvent-based, water-based, 1K or 2K paint and even on low payload robots.
To adapt to any kind of application, 3 bell cups sizes are available:
|EC35 NW||variable pattern from very narrow to small pattern|
|EC50 NW||variable pattern from narrow to large pattern|
|EX65 NW||variable pattern from narrow to large pattern & fine atomization|
Why did we develop the NANOBELL 801?
For years, we have been introducing the most sophisticated bell atomizers to the marketplace. The PPH 707 is a best seller in the Automotive industry and recognized as the most robust, internal charge atomizer. The Accubell 709 EVO, brings the utmost savings in paint thanks to its high transfer efficiency and fast & clean canister dosing technology.
Sames has designed our first non-electrostatic rotary bell atomizer to meet the needs of our customers. The Nanobell 801 rotary bell technology for non-electrostatics is great when used on non-metallic parts with complexed-shaped or recessed areas (perfect for plastic parts).
The revolutionary NANOBELL 801 combines Airspray and rotary bell technologies up to 65,000 RPM. It offers all the benefits of rotary bell atomization to non-electrostatic applications such as high finishing paint savings and enhanced production speed with easier set-up and operation while at a lower investment cost.
NANOBELL 801 is available as a spraying head that is attached with (4) screws or with its straight support for reciprocators and also on robotic versions with either full or hollow wrists.
|Designation||Value||Unit: metric (US)|
|Weight||3-3.5 (6.6-7.7)||kg (lbs)|
|Viscosity Scale (min-max)||20-40||seconds FORD Cup#4|
|Standard Material Supply Pressure||6-8 (87-116)||bar (psi)|
|Maximum Material Pressure||10 (145)||bar (psi)|
|Minimum Paint Flow||30 (0.008)||cc/min (gal/min)|
|Standard Paint Flow||400 (0.1)||cc/min (gal/min)|
|Maximum Paint Flow||800 (0.21)||cc/min (gal/min)|
|Shaping Air Consumption (min-max)||200-900||Nl/min|
|Bearing Air Consumption||125||Nl/min|
|Pilot Air Consumption||10||Nl/min|
|Maximum Air Pressure||7 (101)||bar (psi)|
|Rotation Speed||65 000||rpm|
|ATEX Certification||II 2 G Ex h IIA T6 Gb|
|NANOBELL 801 ROBOT with hollow wrist||910026947|
|NANOBELL 801 ROBOT with full wrist||910026946|
|NANOBELL 801 STRAIGHT||910028344|
|NANOBELL 801 STRAIGHT for Reciprocator, on tube D:63||910028849|
|Support for hollow wrist robot||910026940|
|Support for full wrist robot||910026939|
|Support for reciprocator or static position, on tube D:63||1203616|
|Nut for tube D:63||1204441|
|Yaskawa EPX 2050 & 2900 Adapter||910018263|
|Fanuc P250 adapter||910019313|
|Staubli RX160 adapter||910018262|
|Staubli TX250 adapter||9100182664|
|ABB IRB4400 adapter||910018261|
|Electrical Kit: BSC300, Microphone Sensor + Cable||910027017|
|EX65 Bell Cup Tool||1204427|
|EC50 Bell Cup Tool||900000803|
|EC35 Bell Cup Tool||900005784|
|Tools Kit: Air Shrouds tool + Fittings tool + Valves tool||910029117|
|35 NW Air shroud||900018351|
|50 NW Air shroud||900018225|
|65 NW Air shroud||900018362|
|BELL CUP EC35 Aluminum||910000636|
|BELL CUP EC35 Titanium||910011188|
|BELL CUP EC50 Aluminum||910003159|
|BELL CUP EC50 Titanium||910008756|
|BELL CUP EX65 Aluminum||910004615|
|BELL CUP EX65 Titanium||910009383|
Epoxy primer/sealer is a non-porous finish that is typically recommended as the first base coat over bare steel.
Epoxy primer/sealer multi-component is a non-porous finish base mixed with a hardener that is typically recommended as the first base coat over bare steel.
Designed to hide profile & surface imperfections, multi-component polyurethane primers & sealers improve adhesion of top coats to the substrate due to the addition of a hardener.
Designed to hide profile & surface imperfections, water-based primers & sealers are environmentally friendly.
Designed to hide profile & surface imperfections, polyurethane primers & sealers promote adhesion of top coats to the substrate.
Polyurethane Top Coat is a two- or three-pack isocyanate-cured polyurethane that gives a durable, high gloss finish. Isocyanates included in the hardener are moisture-sensitive & need a specific process for insulating the circuit.
Top Coat Epoxys are used for decorative flooring applications, such as Terrazzo flooring, chip flooring & colored aggregate flooring.
Two-part epoxy coatings were developed for heavy duty service on metal substrates & use less energy than heat-cured.
Water-based polyurethane is popular because of its low odor & low toxicity. It goes on clear without adding a faint color like oil-based versions do & it dries much faster.
Protection, bonding, finishing & sealing for composite & plastic parts