Sames | Fstart G Gravity Airspray Spray Gun

Description

Good value for money
Comfortable spray gun
Easy to repair

Performance

1 Fine adjustments to achieve the perfect spray pattern for all applications
♦ Sames finishing quality at entry price level
♦ Sames's experience in Airspray since 1924
♦ Three atomization and aircap technologies available: Conventional, Compliant LVLP and HVLP

Productivity

2 "Fine atomization" aircap adjustable to 360 degrees
3 Soft springs for a responsive and reduced trigger pull
3 New trigger design for more comfort
4 One of the lightest manual spray guns in its category ensuring a reduction of carpal tunnel injuries

Sustainability

5 Aluminum body for easy cleaning
♦ A small investment for long-term use: Only one maintenance kit for reduced inventory

Sames's Fstart G spray guns make it easy and cost-effective to apply water-based or solvent-based coatings.

Fstart sprayers are available to meet the needs of small to large finishing shops. The Fstart G spray guns can be used by both beginners and experienced professionals giving a desired high-quality finish.

The Fstart spray guns are the result of 95 years of experience in Airspray technology. On top of being an economical cost solution, this new Airspray gun has a comfortable and ergonomic design and is one of the lightest guns in its class.

The Fstart G is available with 3 aircaps in conventional, HVLP and LVLP Compliant to be in line with the European Standard DIN EN 13966-1 and EPA regulation in the United States

Technical data table

Designation	Value	Unit: metric (US)
Maximum Fluid Pressure	6 (87)	bar (psi)
Maximum Air Pressure	6 (87)	bar (psi)
Maximum Fluid Temperature	50 (122)	°C (°F)
Air Inlet	M 1/4" NPS
Stainless Steel, Aluminum Wetted Parts	♦
Recommended CONV Air Pressure	2.5 (36) – 3.5 (51)	bar (psi)
Recommended HVLP/LVLP Air Pressure	1,5 (22) – 2,5 (36)	bar (psi)
Air Consumption CONV (at 2.5 - 3.5 bar / at 36 - 51 psi)	23.3 (13.7)	m3/h (cfm)
Air Consumption HVLP/LVLP (at 1.5 - 2.5 bar / at 22 - 36 psi)	20.4 (12)	m3/h (cfm)
Trigger Pull	16 (3.6)	N (lbs)
Tank Capacity	0.6 (0.16)	l (gal)
Weight	410 (14.5)	g (oz)

Equipment

Designation	Technology	Nozzle size	Fluid output	Max fan width at 20cm (8in)	Part number
Gun FStart G CONV-13-Lva	CONV	1.3	140 cc/mn (4.7 oz/mn)	L: 30 - 40 cm (11.8 - 15.7 in)	135756213
Gun FStart G CONV-15-Lva	CONV	1.5	165 cc/mn (5.6 oz/mn)	L: 30 - 40 cm (11.8 - 15.7 in)	135756215
Gun FStart G CONV-18-Lva	CONV	1.8	220 cc/mn (7.4 oz/mn)	L: 30 - 40 cm (11.8 - 15.7 in)	135756218
Gun FStart G CONV-22-Lva	CONV	2.2	280 cc/mn (9.5 oz/mn)	L: 30 - 40 cm (11.8 - 15.7 in)	135756222
Gun FStart G COMPLIANT HVLP-13-Mva	HVLP	1.3	140 cc/mn (4.7 oz/mn)	M: 20 - 30 cm (7.9 - 11.8 in)	135756113
Gun FStart G COMPLIANT HVLP-15-Mva	HVLP	1.5	165 cc/mn (5.6 oz/mn)	M: 20 - 30 cm (7.9 - 11.8 in)	135756115
Gun FStart G COMPLIANT HVLP-18-Mva	HVLP	1.8	220 cc/mn (7.4 oz/mn)	M: 20 - 30 cm (7.9 - 11.8 in)	135756118
Gun FStart G COMPLIANT HVLP-22-Mva	HVLP	2.2	280 cc/mn (9.5 oz/mn)	M: 20 - 30 cm (7.9 - 11.8 in)	135756122
GUN FSTART G COMPLIANT LVLP-12-MVA	LVLP	1.2	95 cc/mn (3.2 oz/mn)	M: 20 - 30 cm (7.9 - 11.8 in)	135756612
GUN FSTART G COMPLIANT LVLP-13-MVA	LVLP	1.3	140 cc/mn (4.7 oz/mn)	M: 20 - 30 cm (7.9 - 11.8 in)	135756613
GUN FSTART G COMPLIANT LVLP-15-MVA	LVLP	1.5	165 cc/mn (5.6 oz/mn)	M: 20 - 30 cm (7.9 - 11.8 in)	135756615
GUN FSTART G COMPLIANT LVLP-18-MVA	LVLP	1.8	220 cc/mn (7.4 oz/mn)	M: 20 - 30 cm (7.9 - 11.8 in)	135756618
GUN FSTART G COMPLIANT LVLP-22-MVA	LVLP	2.2	280 cc/mn (9.5 oz/mn)	M: 20 - 30 cm (7.9 - 11.8 in)	135756622

Accessories

Designation					Part number
Gravity Plastic cup for FStart					129756928

Kits

Designation		Gun	Hoses dimensions	Part number
Pack Airspray Lucky "FStart G HVLP + air hose"		FStart G HVLP-18-Mva	7.5m Air - ID8mm	152756280
Pack Airspray Lucky "FStart G CONV + air hose"		FStart G CONV-18-Lva	7.5m Air – ID6.5mm	152756380

Spare Parts

Designation			Part number
Maintenance kit for FStart G			129756901
Aircap FStart G CONV-1318-Lva			132756210
Aircap FStart G CONV-22-Lva			132756220
Aircap FStart G HVLP-1322-Mva			132756110
AIRCAP FSTART G LVLP-12 18-MVA			132756610
AIRCAP FSTART G LVLP-22-MVA			132756620
Nozzle + Needle FStart CONV-13			131756213
Nozzle + Needle FStart CONV-15			131756215
Nozzle + Needle FStart CONV-18			131756218
Nozzle + Needle FStart CONV-22			131756222
Nozzle + Needle FStart HVLP-13			131756113
Nozzle + Needle FStart HVLP-15			131756115
Nozzle + Needle FStart HVLP-18			131756118
Nozzle + Needle FStart HVLP-22			131756122
NOZZLE + NEEDLE FSTART LVLP-12			131756312
NOZZLE + NEEDLE FSTART LVLP-13			131756313
NOZZLE + NEEDLE FSTART LVLP-15			131756315
NOZZLE + NEEDLE FSTART LVLP-18			131756318
NOZZLE + NEEDLE FSTART LVLP-22			131756322

Technologies

HVLP

This compliant technology ensures high transfer efficiency (minimum 65%) with reduced atomizing air pressure of 0.7 bar maxi.

Airspray LVLP

Compliant LVLP is an Airspray technology offering a good mix between conventional and HVLP atomization technlogies.

Airspray Conventional

Conventional is an Airspray technology offering a strong atomization power

Documents

Select all documents

FStart G

Format : application/pdf
Size : 432Ko

Select the document

Catalog Airspray Range Sames (English version)

Catalog airspray range sames kremlin

Format : application/pdf
Size : 14Mo

Select the document

FStart G Spare Parts Sheet (for NA only)

Format : application/pdf
Size : 1Mo

Select the document

Instruction Manuals

Select all documents

FSTART Gravity | User manual

Format : application/pdf
Size : 1Mo

Select the document

Materials

Primer Epoxy

Epoxy primer/sealer is a non-porous finish that is typically recommended as the first base coat over bare steel.

Primer Epoxy Multi-Component

Epoxy primer/sealer multi-component is a non-porous finish base mixed with a hardener that is typically recommended as the first base coat over bare steel.

Primer Polyurethane Multi-Component

Designed to hide profile & surface imperfections, multi-component polyurethane primers & sealers improve adhesion of top coats to the substrate due to the addition of a hardener.

Primer Water-Based

Designed to hide profile & surface imperfections, water-based primers & sealers are environmentally friendly.

Primer Polyurethane

Designed to hide profile & surface imperfections, polyurethane primers & sealers promote adhesion of top coats to the substrate.

Water-Based Stains

Water-Based Wood Stains have all the advantages of oil-based stains. They spread easily, can be repaired, blend effortlessly & have plenty of open time. The thicker formula allows for controlled penetration, which will reduce blotching on softer woods such as Aspen, Pine & Maple.

Solvent-Based Stains

A wood stain consists of a colorant suspended or dissolved in an agent or solvent. Colored, or ''stained", finishes do not penetrate the pores of the wood to any significant degree.

CARC Polyurethane Multi-Component

Chemical Agent Resistant Coating (CARC) can be two-component polyurethane paint commonly applied to military vehicles to provide protection against chemical & biological weapons.

Top Coat Polyurethane Multi-Component

Polyurethane Top Coat is a two- or three-pack isocyanate-cured polyurethane that gives a durable, high gloss finish. Isocyanates included in the hardener are moisture-sensitive & need a specific process for insulating the circuit.

Top Coat Epoxy

Top Coat Epoxys are used for decorative flooring applications, such as Terrazzo flooring, chip flooring & colored aggregate flooring.

Top Coat Epoxy Multi-Component

Two-part epoxy coatings were developed for heavy duty service on metal substrates & use less energy than heat-cured.

Top Coat Water-Based

Water-based polyurethane is popular because of its low odor & low toxicity. It goes on clear without adding a faint color like oil-based versions do & it dries much faster.

Top Coat Polyurethane

Polyurethane Top Coat gives a durable, high gloss finish.

Metallic Epoxy

The newest metallic epoxy system on the market allows contractors to heighten the effects & make floors look three-dimensional.

Metallic Water-Based

Polyurethane water-based coatings offer a very high chemical/physical resistance & steel effect & are environmentally friendly.

Metallic Epoxy Multi-Component

A two-component 100%-solid epoxy blended with metallic pigments, Metal Fusion is self-leveling, allowing easy application & seamless floor surfaces.

Metallic Polyurethane

Polyurethane coatings are particularly recommended for application to surfaces subject to high levels of wear & tear where excellent chemical/physical resistance is required. The metallic parts will give a steel effect.