Sames | PMP150 다이어프램-에어스프레이 페인트 펌프

서술

간단한 디자인: 간편한 작동 및 유지 관리
컴팩트 다이어프램 기술: 우수한 피니시를 위한 펄스 없이 일정하게 제공
유체 이송 작업에 전념: 추가 구성 요소 없음, 추가 비용 없음

성능

♦단순고강력펌프
♦처리한 유체구간으로 수질소재와 호환 가능

생산성

♦대형 아웃렛으로 점도가 최대 2,000cc인 다양한 소재 사용 가능
♦유체 섹션에 대한 여러 씰 키트 선택으로 인해 다양한 재료와 호환 가능
♦자재손실을 방지하기 위해 플러싱 시 폐기물 감소

지속가능성

♦단순하고 최적화된 디자인으로 간편한 운영 및 유지 관리
♦크롬 처리 스테인리스강으로 마모 저항성 및 저마찰 개선

전송 애플리케이션을 위한 매우 경제적인 가격의 이상적인 솔루션.

기술 자료표

명칭	수치	단위
압력비	1 : 1
최대 유체 압력	6 (87)	bar (psi)
최대 공기 압력	6 (87)	bar (psi)
최대 온도	50 (122)	°C (°F)
실린더	100 (3.4)	cc (oz)
사운드 등급	< 70	dBa
30 사이클/mn에서 유체 출력	3 (0.8)	l/min (gal/mn)
자유 유량	19 (5)	l/mn (gal/mn)
4bar에서 30Cycles/mn의 공기 소비량(60psi)	1.1 (0.6)	m³/h (cfm)
공기 흡입구	F 3/8" BSP
유체 배출구	F 3/8" BSP
유체 흡입구	F 3/8" BSP
제품 리터당 주기 수	10
높이	22 (8.7)	cm (in)
너비	20 (7.9)	cm (in)
깊이	15 (5.9)	cm (in)
횡격막 폴리우레탄	♦
무게	7.4 (16.3)	kg (lbs)

설비

Designation	Setup	Air motor power regulator	Air regulator fluid pressure	Fluid pressure regulator	Suction rod	Drain rod Ø6x8	Pump output filter	Part number
PMP 150 TRANSFER BARE PUMP	Bare pump	♦	-	-	-	-	-	151752500

부품

Designation	Details		Part number
PACKAGE OF SEALS FOR AIR MOTOR PMP 150 PUMP _1.175 PUMP	Seal kit for the air motor	1	144931091
AIR MOTOR FEEDING FOR PMP	Air motor power regulator to set the motor pressure	2	151753050
SET OF SEALS TEFLON PRODUCT.	Seal kit for the fluid section in Teflon	3	144931092

기술

다이어프램

격막 펌프는 저압 공기동 분리막 펌프이다

파일

Select all documents

Catalog Airspray Range Sames (English version)

Catalog airspray range sames kremlin

Format : application/pdf
Size : 14Mo

Select the document

General Catalog (only for North American market) Sames

General Catalog North America

Format : application/pdf
Size : 6Mo

Select the document

Instruction manuals

Select all documents

재료

Primer Epoxy

Epoxy primer/sealer is a non-porous finish that is typically recommended as the first base coat over bare steel.

Primer Epoxy Multi-Component

Epoxy primer/sealer multi-component is a non-porous finish base mixed with a hardener that is typically recommended as the first base coat over bare steel.

Primer Polyurethane Multi-Component

Designed to hide profile & surface imperfections, multi-component polyurethane primers & sealers improve adhesion of top coats to the substrate due to the addition of a hardener.

Primer Water-Based

Designed to hide profile & surface imperfections, water-based primers & sealers are environmentally friendly.

Primer Polyurethane

Designed to hide profile & surface imperfections, polyurethane primers & sealers promote adhesion of top coats to the substrate.

Enamel Water-Based

Enamel paint air dries to a hard, typically glossy finish, and is used for coating surfaces that are outdoors or otherwise subject to hard wear or temperature changes.

Moisture-Sensitive Polyurethane Multi-Component

Catalyzed polyurethane clear coats and paints are prized for their durability and versatility around the world. They are used on everything from wood cabinetry, mill work and furniture to planes, trains, and automobiles. They are usually mixed with isocyanates in the hardener. The isocyanate component of polyurethane reacts with moisture in the air and form a hard crystalline structure.

UV Material Epoxy Multi-Component

UV-resistant epoxy systems mixed with hardener cure faster & in moist conditions.

UV Material 100% Solid

UV coatings can be formulated up to 100% solids so that they have no volatile component that contributes to pollution.

UV Material Water-Based

Water-based UV coatings can be considered aesthetically equivalent to bi-component acrylic & polyurethane solvent-based coatings. The range is composed of both pigmented & transparent products.

UV Material Epoxy

UV curable epoxy systems do not require the addition of curing agents. They cure within minutes, or even seconds, and have unlimited working times.

UV Material Polyurethane Multi-Component

The UV polyurethane multi-components are especially designed for very strong UV stability. Mixing with hardener gives very high durability & UV resistance.

UV Material Polyurethane

The UV polyurethanes are especially designed for UV stability, The coating is long lasting, offers excellent substrate protection, provides an attractive finish & is user-friendly.

Top Coat Polyurethane Multi-Component

Polyurethane Top Coat is a two- or three-pack isocyanate-cured polyurethane that gives a durable, high gloss finish. Isocyanates included in the hardener are moisture-sensitive & need a specific process for insulating the circuit.

Top Coat Epoxy

Top Coat Epoxys are used for decorative flooring applications, such as Terrazzo flooring, chip flooring & colored aggregate flooring.

Top Coat Epoxy Multi-Component

Two-part epoxy coatings were developed for heavy duty service on metal substrates & use less energy than heat-cured.

Top Coat Water-Based

Water-based polyurethane is popular because of its low odor & low toxicity. It goes on clear without adding a faint color like oil-based versions do & it dries much faster.

Top Coat Polyurethane

Polyurethane Top Coat gives a durable, high gloss finish.

산성 촉매 폴리우레탄 다성분

멀티 컴포넌트 에폭시산 촉매(AC) 시스템은 건조/경화를 위해 경화제 또는 촉매가 필요하며, 화학 반응이 완료될 때까지 바인더의 경화 과정을 시작하고 유지함으로써 작동한다. 용제는 화학반응이 일어나기 전에 옻칠, 페인트 또는 필러로 마무리된다. 촉매는 습기에 민감하며 Flowmax® 기술 보호가 필요하다.

산성 촉매 에폭시 다중 성분

Multi-Component Epoxy Acid Catalyzing (AC)시스템은 건조/경화를 위해 경화제 또는 촉매가 필요하며, 화학 반응이 완료될 때까지 바인더의 경화 과정을 시작하고 유지함으로써 작동한다. 용제는 화학반응이 일어나기 전에 옻칠, 페인트 또는 필러로 마무리된다. AC 제품의 경화 시간은 열을 가하면 극적으로 빨라질 수 있다.

Metallic Epoxy

The newest metallic epoxy system on the market allows contractors to heighten the effects & make floors look three-dimensional.

Metallic Water-Based

Polyurethane water-based coatings offer a very high chemical/physical resistance & steel effect & are environmentally friendly.

Metallic Epoxy Multi-Component

A two-component 100%-solid epoxy blended with metallic pigments, Metal Fusion is self-leveling, allowing easy application & seamless floor surfaces.

Metallic Polyurethane

Polyurethane coatings are particularly recommended for application to surfaces subject to high levels of wear & tear where excellent chemical/physical resistance is required. The metallic parts will give a steel effect.