10C50 GT Airmix® Paint Pump

This paint pump is the perfect pump for Airmix® applications by providing exceptional performance. Recommended for one or two Airmix® gun operations.

Productivity for all

Ideal for Airmix® applications
High efficiency pump for maximum energy savings
Optimized construction for simple & quick maintenance

(OBSOLETE Product : replaced by 15C50 pump)

► Technical manual

Where to buy?

Description

Ideal for Airmix® applications
High efficiency pump for maximum energy savings
Optimized construction for simple & quick maintenance

(OBSOLETE Product : replaced by 15C50 pump)

► Technical manual

Performance:

♦ Economical with low air consumption
♦ Quiet air motor to preserve work environment

Productivity:

♦ Construction without dead zones for quick flushing & product changes
♦ The mobile piston seal ensures a mechanical cleaning of the fluid section's internal wall during pump cycles
♦ Lower mobile single lip packing (GT) reduces friction for improved efficiency

Sustainability:

♦ Fewer parts & simple design for extended lifetime
♦ Triple chrome layer piston for exceptional durability

Our wide selection of accessories allows you to create various configurations to meet your customer requirements.

Technical data table

Designation	Value	Unit: metric (US)
Pressure Ratio	10/1
Maximum Fluid Pressure	60 (870)	bar (psi)
Maximum Air Pressure	6 (87)	bar (psi)
Air Consumption	5.4 (3.2)	m³/h (cfm)
Maximum Temperature	60 (140)	°C (°F)
Cylinder	50 (1.69)	cc (oz)
Sound Level	78	dBa
Recommended Air Pressure	2 - 5 (29 - 72.5)	bar (psi)
Fluid Output at 30 cycles/mn	1.5 (0.4)	l/min (gal/mn)
Fluid Output at 20 cycles/mn	1.0 (0.26)	l/mn (gal/mn)
Fluid Volume per Cycle	50	cc
Free Flow Rate	3.0 (0.78)	l/mn (gal/mn)
Fluid Output at 15 cycles / mn	0.75 (0.2)	l/mn (gal/mn)
Air Consumption at 30 cycles/mn at 4 bar (60 psi)	5.4	m³/h (cfm)
Displacement Per Cycle	50 (3.05)	cc (cubic inch)
Motor Type	250-4
Air Inlet	F3/8" BSP / F3/8" BSP
Fluid Outlet	F 1/2" NPS / M1/2" JIC
Fluid Inlet	F 1/2" BSP / M26x125
Number of Cycles per liter of products	20
Sealing Packing Upper and Lower GT polyethylene	♦
Height	82 (32.3")	cm (in)
Width	35 (13.8")	cm (in)
Depth	21 (8.3 ")	cm (in)
Wetted Parts: Hard Chrome SST, Standard SST, Carbide	♦
Weight	17 (37.5)	kg (lbs)

Equipment

Designation	Version	Fluid inlet	Section rod	Drain rod	Paint filter	Air regulator	Seal	Part number
10C50 PUMP WITH FILTER AND SUCTION ROD DIAM 25	wall	M 26x125	25 mm (1'')	♦	♦	2	GT	151777100
10C50 PUMP W/O FILTER WITH SUCTION ROD DIAM 25	wall	M 26x125	-	-	-	2	GT	151777200

Accessories

Designation					Part number
Stainless steel drain rod Ø16 elbowed F18 x 125					049596000
Two Post Cart w/o plate					051221000
Pump Mounting Plate with straps					056100199
Stainless steel Suction rod Ø23 M26 plunging tube length elbowed 570 mm					149596150
Stainless steel Suction rod Ø23 M26 plunging tube length 1000mm elbowed (for 200 liters drums)					149596160
Gravity hopper 6 liters					151140230

Spare Parts

Designation					Part number
Seal kit for C50 hydraulic section (Chevron/GT)					144950091
Full maintenance kit C50 hydraulic section (Chevron/GT)					144950096
SEAL KIT FOR MOTOR 250-4					146260991
SERVICING KIT FOR MOTOR 250-4					146260996

Technologies

GT Sealing

This technology represents a new generation of sealing designed to extend the life of a pump piston.

Cup Lub

A pump has a cup filled with lubricant at the top of the liquid section.

2 Ball

2 ball pumping technology is highly utilized in fluid sections with one ball / seat for suction & the other ball / seat for feeding.

Triple Chrome Layer

This is a special treatment for very high sustainability & is applied to the piston of the fluid section of a pump.

Documents

Select all documents

Airmix® Catalog 2020 Sames

Format : application/pdf
Size : 7Mo

Select the document

Leaflet 10C50 -20C50 -40C50 Paint Pump (English version) Sames

Format : application/pdf
Size : 499Ko

Select the document

General Catalog (only for North American market) Sames

General Catalog North America

Format : application/pdf
Size : 3Mo

Select the document

Instruction Manuals

Select all documents

Materials

Primer Epoxy Multi-Component

Epoxy primer/sealer multi-component is a non-porous finish base mixed with a hardener that is typically recommended as the first base coat over bare steel.

Primer Polyurethane Multi-Component

Designed to hide profile & surface imperfections, multi-component polyurethane primers & sealers improve adhesion of top coats to the substrate due to the addition of a hardener.

Primer Water-Based

Designed to hide profile & surface imperfections, water-based primers & sealers are environmentally friendly.

Primer Polyurethane

Designed to hide profile & surface imperfections, polyurethane primers & sealers promote adhesion of top coats to the substrate.

CARC Water-Based

Chemical Agent Resistant Coating (CARC) is available in a water-based solution for environmental protection.

CARC Epoxy Multi-Component

Chemical Agent Resistant Coating (CARC) is a paint commonly applied to military vehicles to provide protection against chemical & biological weapons. The surface of the paint is engineered to be easily decontaminated after exposure to chemical warfare & biological warfare agents. The paint is also resistant to damage & removal by decontaminating solutions.

CARC Polyurethane Multi-Component

Chemical Agent Resistant Coating (CARC) can be two-component polyurethane paint commonly applied to military vehicles to provide protection against chemical & biological weapons.

Top Coat Polyurethane Multi-Component

Polyurethane Top Coat is a two- or three-pack isocyanate-cured polyurethane that gives a durable, high gloss finish. Isocyanates included in the hardener are moisture-sensitive & need a specific process for insulating the circuit.

Top Coat Epoxy

Top Coat Epoxys are used for decorative flooring applications, such as Terrazzo flooring, chip flooring & colored aggregate flooring.

Top Coat Epoxy Multi-Component

Two-part epoxy coatings were developed for heavy duty service on metal substrates & use less energy than heat-cured.

Top Coat Water-Based

Water-based polyurethane is popular because of its low odor & low toxicity. It goes on clear without adding a faint color like oil-based versions do & it dries much faster.