04D140
Diaphragm pump
The 04D140 pneumatic, pressure boost double diaphragm pump have been successfully used to feed small and medium-sized painting lines.
Minimum pulsation with short-stroke principle
Maximisation of service life
Minimal operating and maintenance costs
Description
Technical Data
Equipment
Accessories
Documents & Media
Technologies
Markets
Performance
♦ High frequency operation up to 8 cycles/sec
♦ Minimal pulsation due to faster switching cycles of the valve and short stroke principle
1 Stalling free conception with bistabke latching valve
Productivity
2 High pressure output with internal transmission
3 Reversible design to facliltate the integration
4 Advanced soft seat design minimizes paint shearing
Sustainability
5 Wear free pneumatic ceramic valve
6 Short stroke diaphragm minimizing overstretching, resulting longer life span
♦ Compressed air savings up to 55% thanks to few tiny dead spots and compact design of the switching val
| Designation | Value |
|---|---|
| Maximum Air Pressure (bar) | 6 |
| Maximum Air Pressure (psi) | 87 |
| Recommended Material Viscosity Range | 15 000 mPa |
| Fluid Output at 20 cycles / mn (gal/min) | 0.7 |
| Fluid Output at 20 cycles / mn (l/min) | 2.8 |
| Fluid Output at 60 cycles / mn (gal/min) | 2.2 |
| Fluid Output at 60 cycles / mn (l/min) | 8.4 |
| Free Flow Rate (gal/min) | 13.2 |
| Free Flow Rate (l/min) | 50 |
| Number of cycles per liter of products | 7 |
| Pump displacement (cc/cycle) | 140 |
| Pump displacement (in^3/cycle) | 8.54 |
| Depth (in) | 10.3 |
| Depth (mm) | 261 |
| Height (in) | 9.9 |
| Height (mm) | 251 |
| Width/depth (in) | 9.1 |
| Width/depth (mm) | 232 |
| Maximum Material Pressure (bar) | 21 |
| Maximum Material Pressure (psi) | 304 |
| Pressure ratio | 3.5/1 |
| Weight (kg) | 15 |
| Weight (lbs) | 33 |
| Maximum Temperature (°C) | 65 |
| Maximum Temperature (°F) | 149 |
| Power Source | Pneumatic |
| Air Inlet Fitting | F 1/2'' G |
| Material Inlet Port | F 3/4'' BSP |
| Material Outlet Port | F 3/4'' BSP |
| Wetted Parts | PTFE, Stainless steel 303 |
| Certification | II 2 G Ex h IIB T6-T4 Gb X |
| Pump Type | Diaphragm low pressure |
| Pumping technology | Diaphragms |
| Sound Level (dbA) | 67 |
| Designation | Part number | Seal | Diaphragm Material | Setup | Suction accessory |
|---|---|---|---|---|---|
| Pump 04D140 | 144907020 | FEPM | PTFE | Bare | - |
| Designation | Part number |
|---|---|
| SST Suction rod Ø23 plunging tube length 1000mm elbowed (for 200 liters drums) M26x125 | 149596160 |
| SST Suction rod Ø23 plunging tube length elbowed 570 mm M26x125 | 149596150 |
| Fitting M3/4 M26x125 SST | 050102445 |
Documents PDF
-
product-04d140_en_GB.pdf
-
product-04d140_en_US.pdf
Documents Instruction Manuals
-
04D140 User manual
Linked Products
Powder
Let's get in touch-
Why use powder coating?
Contact us to see if powder coating is the right fit for your project.Powder coating is eco-friendly, durable, and delivers a high-quality, solvent-free finish.