40C100 WB
Paint Pump
This water-based (WB) type paint pump provides exceptional performance for high viscosity paints.
Ideal for Airless water-based applications
High efficiency pump for maximum energy savings
Optimized construction - simple and quick maintenance
Description
Technical Data
Equipment
Accessories
Kits
Documents & Media
Technologies
Markets
Performance
♦ Economical with low air consumption
♦ Quiet air motor to preserve work environment
Productivity
♦ Construction without dead zones for quick flushing & product changeover
♦ Large diameter suction valve (27mm) for optimum priming & no risk of cavitation
♦ Built-in pulse absorbing system for smooth, pulse-free operation
♦ Mobile seal located on the piston ensures mechanical cleaning of the fluid section internal wall during pump run
♦ Lower mobile single lip packing (GT) reducing friction for improved efficiency
Sustainability
♦ Simple design with fewer parts for extended lifetime
♦ Polyfluid & PTFE graphite seals for improved wear resistance
♦ Triple chrome layer piston for exceptional durability
| Designation | Value |
|---|---|
| Maximum Air Pressure (bar) | 6 |
| Maximum Air Pressure (psi) | 87 |
| Fluid Output at 20 cycles / mn (gal/min) | 0.5 |
| Fluid Output at 20 cycles / mn (l/min) | 2 |
| Fluid Output at 60 cycles / mn (gal/min) | 1.58 |
| Fluid Output at 60 cycles / mn (l/min) | 6 |
| Free Flow Rate (gal/min) | 1.58 |
| Free Flow Rate (l/min) | 6 |
| Number of cycles per liter of products | 10 |
| Pump displacement (cc/cycle) | 100 |
| Pump displacement (in^3/cycle) | 6.1 |
| Depth (in) | 11 |
| Depth (mm) | 280 |
| Height (in) | 31.5 |
| Height (mm) | 800 |
| Width/depth (in) | 15.7 |
| Width/depth (mm) | 400 |
| Maximum Material Pressure (bar) | 240 |
| Maximum Material Pressure (psi) | 3480 |
| Pressure ratio | 40/1 |
| Air Consumption (cfm) | 25.4 |
| Air Consumption (m3/h) | 43.2 |
| Weight (kg) | 22 |
| Weight (lbs) | 48.5 |
| Maximum Temperature (°C) | 60 |
| Maximum Temperature (°F) | 140 |
| Power Source | Pneumatic |
| Air Inlet Fitting | F 3/4" BSP |
| Material Inlet Port | M 1" BSP |
| Material Outlet Port | F 3/8" NPS / M 3/4" JIC |
| Wetted Parts | Hard chrome stainless steel, Polyethylene, Stainless steel 303, Tungsten carbide |
| Certification | II 2G T1-T3 |
| Motor Type | Mechanical reversing block |
| Pump Type | Cup pump with balls |
| Pumping technology | Cup piston pumps |
| Sound Level (dbA) | 80 |
| Designation | Part number | Material inlet | Seal | Air Regulator fluid pressure | Drain Rod | Lower seal | Pump output Filter | Setup | Suction accessory |
|---|---|---|---|---|---|---|---|---|---|
| 40C100 WB TROLLEY W/ FILTER, SUCTION D25 | 151785500 | M 1" BSPP | Chevron mix Polyfluid/PTFEG | Yes | Yes | GT | Yes | Trolley | Suction rod 1" |
| AIRLESS PUMP 40C100 WB W/M W/O FILTER W/O SUCTION | 151785510 | M 1" BSPP | Chevron mix Polyfluid/PTFEG | Yes | GT | Wall mounted | - | ||
| AIRLESS PUMP 40C100 WB W/M WITH FILTER W/O SUCTION | 151785520 | M 1" BSPP | Chevron mix Polyfluid/PTFEG | Yes | Yes | GT | Yes | Wall mounted | - |
| 40C100 WB W/M WITH FILTER AND SUCTION DIAM 25 | 151785550 | M 1" BSPP | Chevron mix Polyfluid/PTFEG | Yes | Yes | GT | Yes | Wall mounted | Suction rod 1" |
| Designation | Part number |
|---|---|
| Single post cart | 151730140 |
| LARGE DIAM SUCTION ROD SST 1" | 921270101 |
| Pump Mounting Plate with straps | 056100199 |
| AIR REGULATOR KIT FOR AIRMIX SPRAYING | 151740200 |
| Two Post Cart w/o plate | 051221000 |
| SST COUPLING M1/2 JIC F3/4 JIC | 905160219 |
| Fluid filter 3/4 mesh 12 | 155581400 |
| Stainless steel drain rod Ø16 elbowed F18 x 125 | 049596000 |
| Designation | Part number | Aircap | Details | Spray gun | Tip | Hoses length (mm) | Air Regulator | Pump type | Suction accessory | Swivel fitting | Hoses | Whip hose (m) |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| PACK AIRLESS 40C100WB MOB+D25 ROD+PRIMING+SFLOW 517TIP+HOSES | 151265302 | For reversible tip | Prime kit | Sflow 275 4F | 14-13 | 10 | Yes | Wall mounted | Suction rod 1" | Yes | Yes | 1.6 |
| PACK AIRLESS 40C100WB MOB SUCT ROD PRIM D25 SFLOW 275 12-13 | For reversible tip | Prime kit | Sflow 275 4F | 14-13 | 10 | Yes | Trolley | Suction rod 1" | Yes | Yes | 1.6 | |
| PACK 40C100 WB PUMP + SFlow®275 GUN | 151265305 | For reversible tip | Filter | Sflow 275 4F | 14-13 | 10 | Yes | Trolley | Suction rod 1" | Yes | Yes | 1.6 |
Documents PDF
-
product-40c100-wb-airless-paint-pump_en_GB.pdf
-
product-40c100-wb-airless-paint-pump_en_US.pdf
Documents Instruction Manuals
-
40C100 WB | User manual
Documents 3D/2D
-
3D file 40C100 WB
-
3D file 40C100 WB
Linked Products
Airless technology
Let's get in touch-
What is Airless spraying?
Learn more about Airless here!Airless technology sprays paint at high pressure to ensure fast and efficient coverage, making it ideal for large surfaces.
-
What are the benefits of Airless technology?
Contact us to find out how Airless can optimize your production.Airless is the simplest paint system, requiring minimal adjustments. It provides rapid application and can quickly cover large areas.
-
When should I use Airless spraying?
Talk to our specialists to see if Airless is right for your needs.Airless is perfect for large-scale projects, such as wall painting or anti-corrosion protection of metal structures.