33F440
PCS - Flowmax® Circulating Pump
The 33F440 pump is dedicated for paint line automatization feeding multiple spray guns simultaneously. This pump provides sufficient power to keep pace with market trends towards increasingly viscous paints.
Used for circulation and multiple guns feeding.
The biggest and most powerful pump of its category.
Flowmax® - Maintenance free technology
Description
Technical Data
Equipment
Accessories
Documents & Media
Technologies
Markets
Performance
♦ Supply flowrate up to 7L/min
♦ Stalling free conception for 24/7 intensive usage
♦ High output to feed several guns in circulation.
Productivity
1 Complete sealing with ambient air - dust free construction.
♦ Ideal for moisture-sensitive catalyst
2 Rexson exclusive air motor design prevent icing with external distributor
Sustainability
3 Triple chrome piston & cylinder, stainless steel ball & carbide seat for a long-term use.
4 Sleek design with few parts. The inversion system provides a fast changeover for a constant material delivery.
♦ Bellows lifetime 10,000,000 cycles - up to 8 years
♦ Three sealing options for largest material comptatibility
| Designation | Value |
|---|---|
| Maximum Air Pressure (bar) | 6 |
| Maximum Air Pressure (psi) | 87 |
| Fluid Output at 20 cycles / mn (gal/min) | 2.3 |
| Fluid Output at 20 cycles / mn (l/min) | 8.8 |
| Fluid Output at 60 cycles / mn (gal/min) | 7 |
| Fluid Output at 60 cycles / mn (l/min) | 26.4 |
| Free Flow Rate (gal/min) | 7 |
| Free Flow Rate (l/min) | 26.4 |
| Number of cycles per liter of products | 2 |
| Pump displacement (cc/cycle) | 440 |
| Pump displacement (in^3/cycle) | 26.8 |
| Depth (in) | 12.9 |
| Depth (mm) | 32.8 |
| Height (in) | 46.8 |
| Height (mm) | 118.8 |
| Width/depth (in) | 20.7 |
| Width/depth (mm) | 52.6 |
| Maximum Material Pressure (bar) | 198 |
| Maximum Material Pressure (psi) | 2871 |
| Pressure ratio | 33/1 |
| Air Consumption (m3/h) | 104.5 |
| Air Consumption at 15 cycles / mn at 4 bar (60 psi) (cfm) | 46 |
| Air Consumption at 15 cycles / mn at 4 bar (60 psi) (m3/h) | 78.4 |
| Weight (kg) | 121 |
| Weight (lbs) | 265 |
| Maximum Temperature (°C) | 50 |
| Maximum Temperature (°F) | 122 |
| Power Source | Pneumatic |
| Air Inlet Fitting | F 3/4 BSP |
| Material Inlet Port | F 1 NPS |
| Material Outlet Port | F 3/4" JIC |
| Wetted Parts | Hard chrome stainless steel, Polyethylene, Stainless steel 303, Tungsten carbide |
| Motor Type | Switch type |
| Pump Type | Flowmax |
| Pumping technology | Flowmax |
| Designation | Part number | Seal | Lower seal | Setup | Suction accessory | Drum size (L) | Air Regulator | Drain Rod | Pump output Filter |
|---|---|---|---|---|---|---|---|---|---|
| PUMP 33F440 BARE GTE-CO SEALS W/O FILTER W/O SUCTION W/O AIR | 151860800 | GTE-Co abrasive | Cup seal (UHMWPE) | Bare | - | ||||
| PUMP 33F440 BARE PU SEALS W/O FILTER W/O SUCTION W/O AIR | 151860801 | PU | PU | Bare | - | ||||
| PUMP 33F440 BARE GT MSE SEALS W/O FILTER W/O SUCTION W/O AIR | 151860802 | GT polyvalent | Cup seal (UHMWPE) | Bare | - | ||||
| PUMP 33F440 GTE-CO W/M AIR REG FILTER SUCTION ROD 200L+DRAIN | 151860850 | GTE-Co abrasive | Cup seal (UHMWPE) | Wall mounted | Suction rod ID 23 mm | 200L | Yes | Yes | Yes |
| PUMP 33F440 PU W/M AIR REG FILTER SUCTION ROD 200L+DRAIN | 151860851 | PU | PU | Wall mounted | Suction rod ID 23 mm | 200L | Yes | Yes | Yes |
| PUMP 33F440 GT MSE W/M AIR REG FILTER SUCTION ROD 200L+DRAIN | 151860852 | GT polyvalent | Cup seal (UHMWPE) | Wall mounted | Suction rod ID 23 mm | 200 | Yes | Yes | Yes |
| PUMP 33F440 GTE-CO W/M AIR REG W/O FILTER W/O SUCTION ROD | 151860853 | GTE-Co abrasive | Cup seal (UHMWPE) | Wall mounted | - | Yes | |||
| PUMP 33F440 PU W/M AIR REG W/O FILTER W/O SUCTION ROD | 151860854 | PU | PU | Wall mounted | - | Yes | |||
| PUMP 33F440 GT MSE W/M AIR REG W/O FILTER W/O SUCTION ROD | 151860855 | GT polyvalent | Cup seal (UHMWPE) | Wall mounted | - | Yes |
| Designation | Part number |
|---|---|
| Suction rod Ø25 plunging tube length 570 mm | 049597100 |
| Stainless steel drain rod Ø16 elbowed F18 x 125 | 049596000 |
| Fluid filter 3/4 mesh 12 | 155581400 |
| PUMP SUPPORT | 151590510 |
| HEAVY DUTY TROLLEY | 151590650 |
| AIR REGULATOR EQUIPEMENT FOR PUMPS | 151590105 |
| SST Suction rod Ø23 plunging tube length 1000mm elbowed (for 200 liters drums) M26x125 | 149596160 |
-
product-pcs-33f440-flowmax-paint-circulating-system-pump_en_GB.pdf
-
product-pcs-33f440-flowmax-paint-circulating-system-pump_en_US.pdf
-
3D step file - 33F440
Powder
Let's get in touch-
Why use powder coating?
Contact us to see if powder coating is the right fit for your project.Powder coating is eco-friendly, durable, and delivers a high-quality, solvent-free finish.