Reverse Flush
Solution for optimizing the paint line rinsing system.
Reverse flush is a block that dumps and rinses the material supply system without going through the sprayer.
Reverse flush comes in 2 versions: Remote and Built-in. It can be installed within all the paint unit configurations (depending on the distance betweem the pump and sprayer).
Remote Reverse Flush Block
When the pump is placed far away from the sprayer (distance > to 1.5 m) (as in the case of the Slim Arm which no pump can be assembled) then the remote reverse flush block is used (ideally placed at a distance between 1 and 1.5 m from the sprayer).
Built-in Reverse Flush Block
When the pump is placed close to the sprayer (distance < to 1.5 m) (as in the case of the Process Arm) then the reverse flush block is directly assembled onto the pump. The "built-in" reverse flush block is used. This configuration is optimal with a simple installation.
Description
Technical Data
Documents & Media
Performance
♦Decrease time for rinsing and changing colors
♦Upgrade existing facilities
Productivity
♦ Increased productivity
♦ Reduced equipment bulk
♦ Paint savings
Sustainability
♦ Paint savings
♦ Enhanced safety
♦ Rinsing material savings
| Designation | Value |
|---|---|
| Maximum Material Pressure (bar) | 5.5 - 6 |
| Maximum Material Pressure (psi) | 80 - 87 |
| Certification | II 2 G c T6 |
Documents PDF
-
product-reverse-flush_en_GB.pdf
-
product-reverse-flush_en_US.pdf
Powder
Let's get in touch-
Why use powder coating?
Contact us to see if powder coating is the right fit for your project.Powder coating is eco-friendly, durable, and delivers a high-quality, solvent-free finish.