Sames | Nanogun+ Airmix® Manual Electrostatic Medium Fluid Pressure Spray Gun

Description

Electrostatic effect combined to Airmix® atomization raises up the transfer efficiency to an unreached level of 93%
Excellent material distribution and fine particle size control for outstanding finishing quality
Lightweight and enhanced ergonomics for increased operators' comfort

Performance

1 Automatic control of high voltage to maintain constant paint charge for unmatched Transfer Efficiency of 93%
1 Independent settings for perfect process control
2 Optimal wrap-around and penetration effects for unrivaled paint savings with BOTH high current and high voltage
♦ High-quality coverage and regular thickness for outstanding finishing application
♦ Wide range of viscosities and type of solvent based materials to cover all product specifications at reduced costs

Productivity

3 Air and paint flows easily adjustable with intuitive knobs
4 Spray change from flat to round type is fast and simple
4 High quality tungsten carbide tips, individually tested, with repeatable spraying application
5 High Voltage triggered when needle moves: no pressure sensor for higher safety
6 GNM 6080 control module provides smart diagnostics for improved maintenance
♦ Lightweight and enhanced ergonomics for increased operators' comfort

Sustainability

7 Quick Disconnect for enhanced maintenance
8 External Paint Circuit with simplified access for replacement
♦ Reduced Total Cost of Ownership with around 30% less wearable parts than market standards
♦ Reliable quality of raw materials and components for tough use and long lifetime

Sames is the creator of Airmix® which brings, since 1975, the perfect mix between quality and productivity to provide today's industry standard for medium pressure atomization. Taking also full advantage of its 70 years of expertise with electrostatic technology, Sames has developed the perfect combination to offer the best transfer efficiency of the market as well as incomparable finishing application.

The Nanogun+ Airmix®, available in 2 pressure calibrations of 120 and 200 bar (1740 and 2900 psi), meets a wide range of application requirements and is suitable for many markets, such as aerospace, agricultural, construction, metallic furniture, wood, transportation and energy. It is excellent for spraying products with a wide range viscosity to reduce worktime, paint use and costs with improved results.

The Nanogun+ Airmix® makes a difference with its lightweight, ergonomic design and excellent wrap-around effect, thus improving the overall operators' experience. Paint may be supplied to the gun by using a pump. When spraying, the charged paint drops follow the lines of the electric field to the grounded object part. Electrostatics result in paint savings and wrap-around effect reducing overspray and pollution. Adding compressed air to it allows enhanced penetration into cavities and a finer spray pattern.

Our electrostatic Nanogun+ Airmix® sprayer takes advantage of the method of applying coatings to a metal surface which involves the attraction law between positively and negatively charged particles. Just before the atomized paint leaves the tip (also called nozzle), it is given a negative charge. The charged paint droplets are sprayed through a strong electric field. The positively charged, grounded metal item attracts the negatively charged liquid to its surface.

The power of the electric field also influences the force of attraction. After the electric field has been created, the ions follow the field lines towards the negative charge. As the attraction of the electrically charged particles to the grounded surface is so strong, paint drift is reduced. This means a high transfer efficiency with this electrostatic method. Furthermore, the paint droplets are pulled towards surfaces in all directions, so that all sides of target areas are coated. Some particles actually change direction as they are pulled up, down and sideways towards all angles of the objects to be painted. The underside of objects substrates are coated and paint is renowned for reaching around the back of surfaces if an electrostatic painting system is used. The new coatings will even get into small crevasses and this ‘electrostatic wraparound' makes it an ideal technique to apply paint on hard to reach areas with an improved coverage .

Sames electrostatic spray painting Nanogun+ equipment together with the Airmix® atomization quality ensured that paint deposition is optimum and that less paint is released into the air because it is so strongly attracted to grounded surfaces, so overspray is reduced and the environment is safer for the operator.

Technical data table

Designation	Value	Unit: metric (US)
Maximum Fluid Pressure	120 / 200 (1740 / 2900)	bar (psi)
Recommended Fluid Pressure	50-120 / 90-200 (720-1740/1300-2900)	bar (psi)
Maximum Fluid Outlet	1230 (42)	cc/min (oz/min)
Minimum Fluid Outlet	100 (5)	cc/min (oz/min)
Maximum Air Pressure	7 (101)	bar (psi)
Recommended Air Pressure (min)	5 (72)	bar (psi)
Transfer Efficiency	93	%
Maximum Fluid Temperature	40 (104)	°C (°F)
Trigger Lock Safety	♦
Recommended Material Viscosity Range	20-120	s CA4
High Voltage (maximum)	60	kV
Current	80	µA
Weight	670 (23.6)	g (oz)
ATEX Certification	II 2 G 0.24 mJ
High Voltage Control Module	GNM6080: II (2) G [0.24 mJ]

Equipment

Designation	Resistivity (High/Medium/Low)	Pressure	Hose length	Part number
NANOGUN+ AIRMIX®	High	120 bar (1764 PSI)	7.5 m (25 ft)	910021113-07
NANOGUN+ AIRMIX®	High	120 bar (1764 PSI)	15 m (50 ft)	910021113-15
NANOGUN+ AIRMIX®	High	120 bar (1764 PSI)	30 m (100 ft)	910021113-30
NANOGUN+ AIRMIX®	High	200 bar (2940 PSI)	7.5 m (25 ft)	910021115-07
NANOGUN+ AIRMIX®	High	200 bar (2940 PSI)	15 m (50 ft)	910021115-15
NANOGUN+ AIRMIX®	High	200 bar (2940 PSI)	30 m (100 ft)	910021115-30
NANOGUN+ AIRMIX®	Medium	120 bar (1764 PSI)	7.5 m (25 ft)	910025958-07
NANOGUN+ AIRMIX®	Medium	120 bar (1764 PSI)	15 m (50 ft)	910025958-15
NANOGUN+ AIRMIX®	Medium	120 bar (1764 PSI)	30 m (100 ft)	910025958-30
NANOGUN+ AIRMIX®	Medium	200 bar (2940 PSI)	7.5 m (25 ft)	910025959-07
NANOGUN+ AIRMIX®	Medium	200 bar (2940 PSI)	15 m (50 ft)	910025959-15
NANOGUN+ AIRMIX®	Medium	200 bar (2940 PSI)	30 m (100 ft)	910025959-30
NANOGUN+ AIRMIX®	Low	120 bar (1764 PSI)	7.5 m (25 ft)	910021114-07
NANOGUN+ AIRMIX®	Low	120 bar (1764 PSI)	15 m (50 ft)	910021114-15
NANOGUN+ AIRMIX®	Low	120 bars (1764 PSI)	30 m (100 ft)	910021114-30
NANOGUN+ AIRMIX®	Low	200 bar (2940 PSI)	15 m (50 ft)	910021116-15
NANOGUN+ AIRMIX®	Low	200 bar (2940 PSI)	7.5 m (25 ft)	910021116-07
NANOGUN+ AIRMIX®	Low	200 bar (2940 PSI)	15 m (50 ft)	910021116-30

Accessories

Designation	Tips Water flow rate (cc/min) at 120 bar	Water flow rate (cc/min) at 200 bar	Fan width (cm) at dist. = 25 cm	Part number
NOZZLE 03-071	200	260	17	130001563
NOZZLE 04-051	290	380	12	130001564
NOZZLE 04-071	290	380	17	130001565
NOZZLE 04-091	290	380	21	130001566
NOZZLE 04-111	290	380	25	130001414
NOZZLE 04-131	290	380	29	130001415
NOZZLE 06-091	430	570	21	130001416
NOZZLE 06-111	430	570	25	130001417
NOZZLE 06-131	430	570	29	130001418
NOZZLE 06-151	430	570	33	130001419
NOZZLE 09-091	590	770	21	130001420
NOZZLE 09-111	590	770	25	130001421
NOZZLE 09-131	590	770	29	130001422
NOZZLE 09-151	590	770	33	130001423
NOZZLE 12-111	790	1030	25	130001425
NOZZLE 12-131	790	1030	29	130001426
NOZZLE 12-151	790	1030	33	130001427
NOZZLE 14-091	940	1230	21	130001428
NOZZLE 14-111	940	1230	25	130001429
NOZZLE 14-131	940	1230	29	130001430
NOZZLE 14-151	940	1230	33	130001431
NOZZLE 14-171	940	1230	37	130001432

Spare Parts

Designation					Part number
New base for HR version					900021346
Fluid hose connection nut					900021299
New air valve kit with washer					910018203
Maintenance Seal Kit for Nanogun Airmix					910022694
Equipped LR hose holder					910031353
Air settings button enlarger					900020056

Technologies

ATEX Regulation

The ATEX regulation aims at improving the health & safety or workers potentially at risk from explosive atmospheres.

Airmix® spray technology

Since 1975, Airmix® combines conventional and high pressure Airless technologies advantages. It is today's industry standard for medium pressure atomization.

Electrostatic

Electrostatic spraying brings significant advantages thanks to the wrap around effect.

Documents

Select all documents

Nanogun+ Airmix® Manual

Format : application/pdf
Size : 519Ko

Select the document

Catalog electrostatic liquid range - 2022 edition - Sames

Format : application/pdf
Size : 17Mo

Select the document

Nanogun Airmix Gun Preventative Maintenance (for NA only)

Nanogun Airmix Preventative Maintenance (for NA only)

Format : application/pdf
Size : 99Ko

Select the document

General Catalog (For North America only) Sames

General Catalog North America

Format : application/pdf
Size : 3Mo

Select the document

Nanogun Airmix Spare Parts Sheet (for NA only)

Format : application/pdf
Size : 1Mo

Select the document

Instruction Manuals

Select all documents

Nanogun+ Airmix - GNM 6080 (LR - HR) | User manual

Format : application/pdf
Size : 13Mo

Select the document

Materials

Primer Epoxy

Epoxy primer/sealer is a non-porous finish that is typically recommended as the first base coat over bare steel.

Primer Epoxy Multi-Component

Epoxy primer/sealer multi-component is a non-porous finish base mixed with a hardener that is typically recommended as the first base coat over bare steel.

Primer Polyurethane Multi-Component

Designed to hide profile & surface imperfections, multi-component polyurethane primers & sealers improve adhesion of top coats to the substrate due to the addition of a hardener.

Primer Water-Based

Designed to hide profile & surface imperfections, water-based primers & sealers are environmentally friendly.

Primer Polyurethane

Designed to hide profile & surface imperfections, polyurethane primers & sealers promote adhesion of top coats to the substrate.

Anti-Corrosion Epoxy Multi-Component

The Anti-Corrosion Epoxy Multi-Component product is highly resistant to marine & industrial environments, buried conditions, ground water, effluents, salt water & a wide range of oils & chemicals.

Anti-Corrosion Epoxy Free Solvent

Solvent-free epoxy coatings are designed for long-term protection of steel & concrete structures against corrosion, abrasion & chemical attack. Operating temperature ranges from –40F to 1040F.

Anti-Corrosion Polyurethane Multi-Component

A two-component efficient coating product, used as first layer on metallic surfaces & in a wide range of painting systems. Forms an excellent quality anti-corrosive polyurethane film, ensuring the adherence between the surface & the next layer of the painting process.

Anti-Corrosion Epoxy

Anti-Corrosion Epoxy is applied for active anti-corrosive & anti-rust protection of iron & steel surfaces that are to be coated. It is extremely hard & resistant to friction. It is particularly resistant to diluted acids, alkalis, petroleum products, some solvents, water, sea water, and more.

Anti-Corrosion Epoxy High Solid

Used for the steel structures of steel pipeline, steel frame, bridge & plant facilities for effective, long-term substrate protection.

Anti-Fouling

Anti-fouling paint, or bottom paint, is a specialized coating applied to the hull of a ship or boat to slow the growth of sub-aquatic organisms that attach to the hull & can affect a vessel's performance & durability.

Anti-Corrosion Polyurethane

Polyurethane coatings are often used for the corrosion protection of steel because they are particularly economical to apply. They dry quickly & can therefore be over-coated in short intervals. They can also be applied independently of the weather conditions & are resistant to impact.

UV Material Epoxy Multi-Component

UV-resistant epoxy systems mixed with hardener cure faster & in moist conditions.

UV Material 100% Solid

UV coatings can be formulated up to 100% solids so that they have no volatile component that contributes to pollution.

UV Material Water-Based

Water-based UV coatings can be considered aesthetically equivalent to bi-component acrylic & polyurethane solvent-based coatings. The range is composed of both pigmented & transparent products.

UV Material Epoxy

UV curable epoxy systems do not require the addition of curing agents. They cure within minutes, or even seconds, and have unlimited working times.

UV Material Polyurethane Multi-Component

The UV polyurethane multi-components are especially designed for very strong UV stability. Mixing with hardener gives very high durability & UV resistance.

UV Material Polyurethane

The UV polyurethanes are especially designed for UV stability, The coating is long lasting, offers excellent substrate protection, provides an attractive finish & is user-friendly.

Top Coat Polyurethane Multi-Component

Polyurethane Top Coat is a two- or three-pack isocyanate-cured polyurethane that gives a durable, high gloss finish. Isocyanates included in the hardener are moisture-sensitive & need a specific process for insulating the circuit.