PPH707 EXTi Fingerless External Charge Electrostatic Rotary Bell Atomizer
- Outstanding productivity
- Highly performing by nature
- Eco-friendly solution at low investment cost
Outstanding productivity:
The PPH 707 EXTi improves productivity in allowing continuous waterborne application without refill time between jobs as for canister system and without paint volume limitation as for insulated paint system. On the other hand, it offers an extended production time up to 8 hours without manual cleaning thanks to its innovative patented air blow ring system, which protects the charge ring in non-conductive PTFE material from contamination, combined with a bell atomizer cleaner device for automatic cleaning.
Highly performing by nature:
The fingerless conception of the PPH 707 EXTi combined with a compact design make it able to spray on any complex shapes, as interior cut-ins of vehicles or plastic bumpers, and improve the robot trajectories for better performances.
The 16 electrodes arranged around the charge ring, for improved high voltage performances, charge properly the droplets to generate a unique wrap-around effect reducing overspray. Offered with the renowned range of high-speed magnetic bell cups (EC43, EC50 & EX65) in addition to the proven High Velocity Turbine, the PPH 707 EXTi is reaching the finest atomization.
Eco-friendly solution at low investment cost :
The PPH 707 EXTi brings a solution environmentally friendly by the use of water-borne materials which are better for the environment than solvent-borne. In addition, the investment cost is drastically reduced because the system is less expensive than any other internal charge waterborne solutions such as canister or insulated paint system.
The PPH 707 EXTi is extending our external charge offer, positioning Sames as expert in all kind of electrostatic bell sprayers.
External Charge Technology:
Used only for water-based paint, external charge technology charges the paint outside the atomizer after it leaves the bell cup.
Droplets are ionized by pins at the top of electrodes stationed around the bell cup.
Advantages:
Designation | Value | Unit: metric (US) |
---|---|---|
Weight | 7.5 (16.5) | kg (lbs) |
Viscosity Scale (min-max) | 20 - 40 | seconds FORD Cup#4 |
Standard Material Supply Pressure | 6 - 8 (87 - 116) | bar (psi) |
Maximum Material Pressure | 10 (145) | bar (psi) |
Minimum Paint Flow | 100 (0,0265) | cc/min (gal/min) |
Standard Paint Flow | 300 (0,0800) | cc/min (gal/min) |
Maximum Paint Flow | 600 (0,1600) | cc/min (gal/min) |
Rotation Speed | 20 - 70 000 | rpm |
Voltage Max | 70 | kV |
Current Max | 500 | µA |
ATEX Certification | II 3 G X T6 0.24 mJ < E < 350 mJ Type B-L EN 50176 | |
High Voltage Unit | UHT330i | |
High Voltage Control Module | GNM300: II (2) G [350 mJ < Ex < 2J] |
Designation | Part number | ||||
---|---|---|---|---|---|
PPH 707 EXTi Atomizer (Large Pins Version) | 910033322 |
Designation | Part number | ||||
---|---|---|---|---|---|
Tool Kit PPH 707 EXTi with Bell Cup EC43 | 910032164 | ||||
Tool Kit PPH 707 EXTi with Bell Cup EC50 | 910034003 | ||||
Tool Kit PPH 707 EXTi with Bell Cup EX65 | 910030931 | ||||
Installation / Removal tool for Air shroud Kit 43 NW | 900018166 | ||||
Installation / Removal tool for Air shroud Kit 50 NW | 900020167 | ||||
Adaptor Air shroud Kit 65 NW | 900020611 | ||||
Installation / Removal tool for Charge Ring | 900020166 | ||||
HV Contact Needle Extraction Tool | 910030395 | ||||
Removal tool for high voltage connection and ground cable | 900006354 | ||||
Installation / Removal tool for rear nut and quick disconnect plate nut | 900020031 | ||||
Removal tool for EC43 magnetic bell cup | 900018693 | ||||
Removal tool for EC50 magnetic bell cup | 900000803 | ||||
Removal tool for EX65 magnetic bell cup | 900005087 |
Designation | Part number | ||||
---|---|---|---|---|---|
EC43 Titanium Bell Cup | 910028230 | ||||
Air shroud Kit 43 NW | 910028336 | ||||
EC50 Aluminium Bell Cup | 910003159 | ||||
EC50 Titanium Bell Cup | 910008756 | ||||
Air shroud Kit 50 NW | 910033775 | ||||
EX65 Aluminium Bell Cup | 910004615 | ||||
EX65 Titanium Bell Cup | 910009383 | ||||
Air shroud Kit 65 NW | 910030826 | ||||
Equipped Electrode (Large Pin) | 910031931 | ||||
High voltage contact needle (Large Pin) | 910031932 | ||||
O-ring set (Turbine Side) | 910003415 | ||||
O-ring set (Body Side) | 910003416 | ||||
Nanovalve | 1510004 | ||||
Microvalve | 1507375 | ||||
Injector D.: 1,8 (Standard) | 900000158 |
Format : application/pdf
Size : 424Ko
Format : application/pdf
Size : 14Mo