Sames | 15C25 Airmix® Paint Pump

Description

Good chemical compatibility with GT or MB-A cartridges.
Large range of "ready to spray" kits
Suction rod or gravity hopper

PERFORMANCE

♦ Constant delivery and pulse free for superior finish
♦ Priming at very low air pressure (0.6 bar)

PRODUCTIVITY

♦ Large foot valve to handle high viscosity materials up to 5,000 cPs
♦ A closed construction to prevent from risk of injuries & to protect lubricant from external contamination
♦ Quick maintenance thanks to an easy rotable outlet fitting
♦ Facilitate pump priming & flushing thanks to a design made to eliminate dead zone: time saved
♦ Leak monitoring vent hole for fast control
♦ A quiet air motor make very low noise

SUSTAINABILITY

♦ 45% less part vs competitors for the air motor to provide a better maintenance
♦ Differential air motor to avoid the paint pump from frost
♦ Ultra coated pluger for less friction & improved abrasion resistance
♦ Single GT seal to avoid throat packing maintenance & low friction & offers a large lubricant wet cup

The 15C25 Compact Airmix® paint pump is recommended to handle all types of materials, ranging from medium to low viscosity.

Technical data table

Designation	Value	Unit: metric (US)
Pressure Ratio	15/1
Maximum Fluid Pressure	90 (1305)	bar (psi)
Maximum Air Pressure	6 (87)	bar (psi)
Air Consumption	2.8 (1.65)	m³/h (cfm)
Maximum Temperature	60 (140)	°C (°F)
Weighted Sound Level	71.2	dBA
Recommended Air Pressure	2 - 5 (29 - 72.5)	bar (psi)
Fluid Output at 30 cycles/mn	0.75 (0.2)	l/min (gal/mn)
Fluid Output at 20 cycles/mn	0.5 (0.13)	l/mn (gal/mn)
Fluid Volume per Cycle	25	cc
Free Flow Rate	1.5 (0.39)	l/mn (gal/mn)
Fluid Output at 15 cycles / mn	0.375 (0.01)	l/mn (gal/mn)
Air Consumption at 30 cycles/mn at 4 bar (60 psi)	2.8	m³/h (cfm)
Displacement Per Cycle	25 (1.52)	cc (cubic inch)
Motor Type	245-4
Air Inlet	F3/8 BSPP
Fluid Outlet	F 3/8 NPS / M1/2'' JIC
Fluid Inlet	F 1/2 BSPP / M26x125
Hard Chrome Stainless Steel, Wetted Parts	♦
Number of Cycles per liter of products	40
Sealing Packing Upper and Lower GT polyethylene	♦
Height	57.5 (22.6)	cm (in)
Width	32 (12.6)	cm (in)
Depth	17 (6.69)	cm (in)
Wetted Shares: Stainless Steel	♦
Weight	7.7 (17)	kg (lbs)

Equipment

Designation	Version	Fluid inlet	Suction rod	Paint filter	Air regulator	Seal	Part number
15C25 PUMP W/O RODS	Wall	M 26x125	-	-	2	GT	151140000
15C25 PUMP W/O RODS	Wall	F 1/2 BSP	-	-	2	GT	151140320
15C25 PUMP W/O RODS	Wall	M 26x125	-	-	2	MB-A	151140400
15C25 PUMP W/O RODS	Wall	F 1/2 BSP	-	-	2	MB-A	151140450
15C25 PUMP WITH SUCTION ROD	Wall	M 26x125	16 mm (5/8'')	-	2	GT	151140100
15C25 PUMP WITH SUCTION ROD AND FILTER	Wall	M 26x125	16 mm (5/8'')	♦	2	GT	151140150
15C25 PUMP WITH SUCTION ROD	Wall	M 26x125	16 mm (5/8'')	-	2	MB-A	151140500
15C25 PUMP AIRLESS AIR SUPL W/O PRODUCT FILTER	Wall	M 26x125	16 mm (5/8'')	-	1	GT	151140300
15C25 PUMP WITH SUCTION ROD & FILTER	Wall	M 26x125	16 mm (5/8'')	♦	2	MB-A	151140550
15C25 PUMP AIRLESS AIR SUPL W/O PRODUCT FILTER	Wall	M 26x125	16 mm (5/8'')	-	1	MB-A	151140650

Accessories

Designation				Part number
Wall-mounted totem				151140240
Tripod				151140210
Gravity hopper 6 liters				151140230
Stainless Steel Suction rod Ø16 M26 plunging tube length 570 mm elbowed				149596050
Stainless Steel Suction rod Ø16 M26 plunging tube length 1000mm elbowed (for 200 liters drums)				149596060
Stainless steel Suction rod Ø23 M26 plunging tube length elbowed 570 mm				149596150
Stainless steel Suction rod Ø23 M26 plunging tube length 1000mm elbowed (for 200 liters drums)				149596160
Stainless steel drain rod Ø16 elbowed F18 x 125				049596000
Fluid filter Mesh 6 3/8 (Inlet F1/2"JIC - Outlet M1/2"JIC)				155580600
Air plate with 2 air regulators				151140070
Air plate with 1 air regulator				151140060

Kits

Designation	Gun type	Tip	Hoses included	Swivel fitting	Mounting	Packing material	Output filter	Suction rod	Part number
W/M PACK AIRMIX® PUMP 15C25 NO FILT+SUC ROD&XCITE®+120 NO SWI	Xcite®+ 120	-	7.5 m (24 ft)	-	Wall	GT	-	Ø 16	151261001
W/M PACK AIRMIX® PUMP 15C25 NO FILTER W/O SUCT ROD+Xcite®+120	Xcite®+ 120	-	7.5 m (24 ft)	•	Wall	GT	-	-	151260976
W/M PACK AIRMIX® PUMP 15C25 NO FILTER&SUCTION ROD&Xcite®+120B	Xcite®+ 120	-	7.5 m (24 ft)	•	Wall	GT	-	Ø 16	151260974
AIRMIX® PACK W/M 15C25 MBA NO FILT SUC D16 XCITE®+120 SWI H7.5	Xcite®+ 120	-	7.5 m (24 ft)	•	Wall	MB-A	-	Ø 16	151265005
AIRMIX® PACK W/M 15C25 MBA NO FILT W/O SUC XCITE®+120 SWI H7.5	Xcite®+ 120	-	7.5 m (24 ft)	•	Wall	MB-A	-	-	151265006
AIRMIX® PACK W/M 15C25 MBA NO FILT SUC D16 XCITE®+120 H7.5	Xcite®+ 120	-	7.5 m (24 ft)	-	Wall	MB-A	-	Ø 16	151265015
Airmix® PACK 15C25 W/M FILTER SUC Xcite®+Light120 09.114 H7.5M	Xcite®+ 120 Light	09-114	7.5 m (24 ft)		Wall	MB-A	•	Ø 16	151140600

Spare Parts

Designation				Part number
Servicing kit for 245-4 air motor				144140190
Reversing kit				144140191
MB-A Cartridge kit				144130365
MB-A cartridge and piston kit				144130289
GT Cartridge kit				144130205
GT cartridge and piston kit				144135291
Servicing kit C25 fluid section				144130291
Reversing kit				144130191

Technologies

GT Sealing

This technology represents a new generation of sealing designed to extend the life of a pump piston.

Cup Lub

A pump has a cup filled with lubricant at the top of the liquid section.

2 Ball

2 ball pumping technology is highly utilized in fluid sections with one ball / seat for suction & the other ball / seat for feeding.

MBA cartridge

MB-A cartridge is a patented sealing technology offering best performances - superior strength and durability - with water-based and premixed 2K materials

Triple Chrome Layer

This is a special treatment for very high sustainability & is applied to the piston of the fluid section of a pump.

Documents

Select all documents

15C25 Airmix® Paint Pump

Format : application/pdf
Size : 496Ko

Select the document

Airmix® Catalog 2024 Sames

Format : application/pdf
Size : 7Mo

Select the document

General Catalog (For North America only) Sames

General Catalog North America

Format : application/pdf
Size : 3Mo

Select the document

15C25 & 30C25 Preventative Maintenance Sheet (for NA only)

15C25 & 30C25 Preventative Maintenance (for NA only)

Format : application/pdf
Size : 845Ko

Select the document

15C25 & 30C25 Spare Parts Sheet (for NA only)

15C25 & 30C25 Spare Parts Breakdown (for NA only)

Format : application/pdf
Size : 663Ko

Select the document

Instruction Manuals

Select all documents

15C25 / 30C25 | User manual

Format : application/pdf
Size : 11Mo

Select the document

Materials

Primer Polyurethane Multi-Component

Designed to hide profile & surface imperfections, multi-component polyurethane primers & sealers improve adhesion of top coats to the substrate due to the addition of a hardener.

Primer Water-Based

Designed to hide profile & surface imperfections, water-based primers & sealers are environmentally friendly.

Primer Polyurethane

Designed to hide profile & surface imperfections, polyurethane primers & sealers promote adhesion of top coats to the substrate.

CARC Water-Based

Chemical Agent Resistant Coating (CARC) is available in a water-based solution for environmental protection.

CARC Epoxy Multi-Component

Chemical Agent Resistant Coating (CARC) is a paint commonly applied to military vehicles to provide protection against chemical & biological weapons. The surface of the paint is engineered to be easily decontaminated after exposure to chemical warfare & biological warfare agents. The paint is also resistant to damage & removal by decontaminating solutions.

CARC Polyurethane Multi-Component

Chemical Agent Resistant Coating (CARC) can be two-component polyurethane paint commonly applied to military vehicles to provide protection against chemical & biological weapons.

Top Coat Polyurethane Multi-Component

Polyurethane Top Coat is a two- or three-pack isocyanate-cured polyurethane that gives a durable, high gloss finish. Isocyanates included in the hardener are moisture-sensitive & need a specific process for insulating the circuit.

Top Coat Water-Based

Water-based polyurethane is popular because of its low odor & low toxicity. It goes on clear without adding a faint color like oil-based versions do & it dries much faster.

Top Coat Polyurethane

Polyurethane Top Coat gives a durable, high gloss finish.

Markets

Machine Tools

Protection & finishing applications

Coil Coating

Liquid & powder coating on metallic coils

Cab

Protection, finishing, bonding & sealing solutions for cabs

Handling Machines

Protective & finishing coating for handling & lifting machines

Gas Tanks & Bottles

Liquid & powder protective coating for gas bottles & tanks

Steel Drums

Protection, sealing & finishing for steel drums

Kitchen & Bath

Preparation & finishing for kitchen & bath market

Coffins

Bonding & finishing solutions for coffins

Furniture

Protection, bonding & finishing for furniture

Interior & Exterior Joinery

Protection, bonding, finishing, dispensing & sealing for interior & exterior joinery

Forest Machines

Protection & finishing of forest machinery

Tractors

Protection, finishing, bonding & sealing for tractors

Harvesters

Protection, finishing, bonding & sealing for harvesters

Farming Trailers

Protection, finishing, bonding & sealing solutions for farming trailers

Sprayers

Protection, finishing, bonding & sealing for sprayers

Truck Cabs

Protection, finishing, bonding & sealing solutions for truck cabs

Railways

Protective coating, sealing & bonding applications for railway vehicles & parts

Recreational Vehicles

Bonding & sealing solutions for recreational vehicles

Yachting

Protective & finishing coating for yacht & sea vessels

Bus

Protection, finishing, bonding & sealing solutions for bus

Road Trailers

Anti-corrosion & protective coating for road trailers

Solutions

Airmix® manual spray gun easy solution

This solution is a simple concept - with Airmix® Xcite®+ or Xcite®+ Light spray gun - for one or two painters. The design of the gun reduces the operator fatigue.