Inocart H Complete manual powder package

The Inocart H is a simple and complete manual solution with a fluidized hopper for spraying powder. Partnering the Inogun M spray gun and the Inobox control module enhances the user's experience. It contains a user-friendly interface with advanced ergonomic functions to help maintain the focus on the powder application and the finish quality.

USER-FRIENDLY COMPACT EQUIPMENT READY TO SPRAY

Highest finishing quality: High fluidization for smooth and constant application of difficult powders
Efficient powder transfer: TEC5 technology
Easy to operate: Less than 2 minutes from training to production

Where to buy?

INOCART-H_fiche-produit-page2.tif *inocart-application-page2 Products & Solutions > Products Powder, Web2pdf pictures, Pic

Description

Highest finishing quality: High fluidization for smooth and constant application of difficult powders
Efficient powder transfer: TEC5 technology
Easy to operate: Less than 2 minutes from training to production

Performance

1 Constant and stable spray pattern for smooth and even applications
1 Well-balanced gun for easy maneuvering
2 Three factory presets for quick start. 99 customer presets available to meet production requirements
2 Quick and easy adjustment of the Inobox height for easy information reading
3 TEC5 technology delivers a high-quality finish
4 Smooth powder flow with low velocity due to the fluidized hopper
♦ No puffing

Productivity

1 Powerful cascade providing a strong wraparound effect
2 Advanced HV control for excellent penetration of complex-shaped parts
2 Simple and instant control of powder flow rate
3 High transfer efficiency to reduce process time
5 Self-locking hook to both maintain the gun and the pump during cleaning
6 Dedicated foot rest to easily move the Inocart

Sustainability

1 Unsurpassed cascade performance lifetime
2 All wear parts are monitored on the controller to encourage proper preventative maintenance
4 Stainless steel hopper for industrial use
7 Designed for industrial use
♦ Built with proven and high-quality components

The Inocart H is perfect for all types of powders, including metallic and material-filled powders. The hopper, with a capacity of 50 liters (13.2 US gallons), ensures a very stable powder spraying. Powder and energy savings have been incorporated at the core of the gun's development to reduce work by enhancing productivity and finishing quality of the coating. The TEC5 (Transfer Electronic Control) ensures the self-regulation of the electrostatic charge taking into account the powder flow and distance of the parts in order to optimize the powder transfer and finish quality.

The Inocart H is easy to clean because of the quick and easily dismantling hopper. It is also well-balanced and comfortable to manage. The powerful high voltage unit paired with the high voltage Inobox control unit delivers a high wraparound effect on large parts (D. 500mm / 20 in.) and has deep penetration into recessed areas. This reduces the cost of the equipment with a better use rate of powder and reduces the time to spray powder. The Inobox is the real brain behind the Inogun M as it performs the High Voltage and all air controls: high voltage, current, electrode cleaning air, injection, and dilution.

The powder hose and the cable are available in two different lengths: 6 meters (19.7 ft) and 12 meters (39.4 ft) to process small or large parts and components. Either can be used as the main tool to perform powder coating or used as additional equipment for pre-touch or touch-up. The expected result will be easily achieved.

Technical data table

Designation	Value	Unit: metric (US)
Maximum Air Pressure	7 (101.5)	bar (psi)
Air Consumption	5 - 15 (2.9 - 8.9)	m3/h (cfm)
High Voltage (maximum)	100	kV
Weight	37 (81.6)	kg (lbs)
Tank Capacity	50 (12.5)	l (gal)
Current Max	110	µA
Powder Output Max	450 (15.8)	g/mn (oz/mn)
Relative Humidity Max	80	%
Height	1230 (48.4)	mm (in)
Width	490 (19.2)	mm (in)
Length (gun only)	340 (13.4)	mm (in)
Length	670 (26.4)	mm (in)

Kits

Designation					Part number
Pack Inocart H, 6 m					910030365
Pack Inocart H, 12 m					910030365-12

Technologies

Powder Tank

Powder tank

TEC5

TEC5 (Transfer Electronic Control)

CORONA CHARGE

CORONA CHARGE-POWDER COATING

Documents

Select all documents

INOCART H

Format : application/pdf
Size : 513Ko

Select the document

Catalog Electrostatic Powder range 07-2023 Sames (English version)

Format : application/pdf
Size : 13Mo

Select the document

General Catalog (For North America only) Sames

General Catalog North America

Format : application/pdf
Size : 3Mo

Select the document

Instruction Manuals

Select all documents

CS 130 | User manual

Format : application/pdf
Size : 2Mo

Select the document

Inobox control module |User manual

Format : application/pdf
Size : 10Mo

Select the document

Inocart VT, Inocart H|Instruction manual

Format : application/pdf
Size : 7Mo

Select the document

Materials

Mixed or Hybrid

Hybrid powder coatings are a blend of epoxy and polyester resins used primarily for indoor applications. They offer improved penetration into corners and recesses (Faraday Cage areas) and are less sensitive to overbake on curing than many other chemistries, making them suitable for use on appliances, radiators and other temperature-sensitive applications.

Polyester

Polyester Powder Coatings allows long-term exterior durability, high performance mechanical properties & over-bake resistance. Polyester powder is widely used for decorative parts where a good resistance to sunlight (ultraviolet rays) are required. Many automotive trim components & other exterior parts are coated with polyester powders.

Epoxy

Epoxy Powder Coatings allows toughness, corrosion resistance, chemical resistance, flexibility, adhesion & abrasion resistance. Epoxy powder is normally used where a tough, durable film is required with limited exposure to direct sunlight (chalk-like appearance after extended sun exposure).

Acrylic

ACRYLIC resins are typically used in the automotive industry as a clear coat on materials. Acrylic creates a smooth clear coat with very good clarity and provides - better than a clearcoat made of different types of powders - a hard surface that is highly chip-resistant. Acrylic resins are used as additives to promote improved flow and leveling as well as enhanced stain and chemical resistance in polyester hybrid, polyester TGIC, and polyurethane powder coatings. The typical curing cycle is similar to polyester finishes, but may require extra time and temperature for high stain & chemical resistant finishes. Example: 20 minutes @ 190°C (375°F) or 10 minutes @ 204°C (400°F)

Nylon

Nylon is a thermoplastic. Meaning its chemistry does not change when it is melted to the metal part. Nylon will melt and re-melt if the metal part is heated again. Nylon coating powder is aesthetically attractive when applied properly but is never specified simply because it looks good. Costing more than 3 times the typical paint or powder finish, nylon is specified for functionality IE: slip, sound dampening, flange linings, and medical case brackets. Other types of parts we apply nylon to are: drive splines, glove box strikers, door strikers, seat springs, and various clips and clamps used in the aerospace and auto industries. Nylon powder for use in coating metal can be purchased in two chemistries: nylon 11 or nylon 12. What is the difference? The chemist may argue there are plenty of differences, however, practically speaking Nylon 12 is slightly less hygroscopic than Nylon 11 (less than 1%) Nylon 12 typically will have lower gloss, and nylon 12 may be slightly less expensive to purchase depending on the amount ordered. When buying nylon, gloss can not be specified. Generally, nylon 11 is around 70 gloss. Nylon 12 is typically 30 gloss. Gloss level will be the same batch to batch, and will only vary depending on the manufacturing process. Nylon is considered a "softer" coating, easily machinable, but can not be easily marked with a fingernail.

Fluoropolymer

A fluoropolymer is a chemical compound that contains many strong carbon-fluoride bonds. The fluorine in a fluoropolymer is electrically negative, which gives it the property of not bonding easily with other materials. That's what makes a fluoropolymer non-stick. A fluoropolymer is an umbrella term, and it includes many other products with trade names that you may have heard of, including Teflon, Excalibur, Algoflon, Xylan, Solef, and Fluon. The first fluoropolymers was developed in the 1930s, but hundreds of variations now exist. Fluoropolymers are in high demand for use in industrial coatings because they possess some very desirable qualities. First, fluoropolymers have excellent non-stick properties, as evidenced by their use in non-stick cookware. Also, fluoropolymers reduce friction and resist corrosion. They withstand very high temperatures, as well. Fluoropolymers are insulators, meaning they do not conduct electricity. They do not absorb water, either. This combination of factors makes them ideal for use in electronics, automotives, and many other uses. Fluoropolymer resins are top of line for exterior weatherability and UV stability in both powder and liquid coatings. Fluoropolymer powder coatings are purposely tailored for the architectural market and offer a long-life durable finish. Fluoropolymer powder coat resin systems can be formulated to meet the requirements of the high performance AAMA 2605 specification. These finishes are resistant to moisture, weathering, ozone and UV radiation. An application for this finish would include architectural projects that require long term cosmetic and functional protection.

Polyvinyl Chloride

PVC based coatings offer many advantages over the other thermoplastic materials available as binders for coating production. These coatings have very good resistance to many solvents, which is a rather poor characteristic of the thermoplasts, combined with resistance towards water and acids. They have excellent impact resistance, salt spray resistance, food staining resistance, and good dielectric strength for electrical applications. Polyvinyl chloride is one of the cheapest polymers produced by the industry on a large scale. Its basic properties include chemical and corrosion resistance, good physical strength and good electrical insulation. Polyvinyl chloride (PVC) is by nature a brittle polymer, but the flexibility of the material can be easily adjusted by using an appropriate amount of a suitable plasticizer.

Polyurethane

Polyurethane powders have excellent flow characteristics with excellent chemical and mechanical properties. Outstanding corrosion resistance and excellent external exposure properties make them suitable alternative to polyester powders. GENERAL FEATURES Polyurethane powder contains polyurethanic resins cured with curing agents. The powder forms protective and decorative film along with enhanced outdoor resistance. The protective film have good resistance to mechanical damage, detergents, fuels and oils.

Thermoplastic powder

Thermoplastic powders features superior corrosion resistance (UV, chemical and salt resistance). They are recommended for anti-corrosion applications when a high thickness is required. They are widely used in the offshore, marine, fences, transportation, outdoor furniture markets.

Markets