| Designation | Value | Unit: metric (US) |
|---|---|---|
| Pressure Ratio | 1:1 | |
| Maximum Fluid Pressure | 6 (87) | bar (psi) |
| Maximum Air Pressure | 6 (87) | bar (psi) |
| Maximum Temperature | 50 (122) | °C (°F) |
| Cylinder | 100 (3.4) | cc (oz) |
| Sound Level | < 70 | dBa |
| Fluid Output at 30 cycles/mn | 3 (0.8) | l/min (gal/mn) |
| Free Flow Rate | 19 (5) | l/mn (gal/mn) |
| Air Consumption at 30 Cycles/mn at 4 Bar (60 psi) | 1.1 (0.6) | m³/h (cfm) |
| Air Inlet | F 3/8" BSP | |
| Fluid Outlet | M 3/8" NPS | |
| Fluid Inlet | M 18x125 | |
| Number of cycles per liter of products | 10 | |
| Height | 24 (9.4) | cm (in) |
| Width | 36 (14.2) | cm (in) |
| Depth | 26 (10.2) | cm (in) |
| Wetted parts PTFE, Polypropylene, stainless steel | ♦ | |
| Weight | 5 (11) | kg (lbs) |
| Designation | Setup | Air motor power regulator | Atomization air regulator | Air regulator fluid pressure | Suction rod | Drain rod Ø6x8 | Pump output filter | Part number | |
|---|---|---|---|---|---|---|---|---|---|
| PMP 150 BARE PUMP | Bare Pump | - | - | - | - | - | - | 1 | 144931000 |
| PMP 150 WALL-MOUNTED | Wall Mounted | ♦ | ♦ | ♦ | - | - | - | 2 | 151759900 |
| PMP 150 WALL-MOUNTED WITH SUCTION ROD | Wall Mounted | ♦ | ♦ | ♦ | ♦ | - | - | 3 | 151753000 |
| PMP 150 WALL-MOUNTED WITH FILTER | Wall Mounted | ♦ | ♦ | ♦ | ♦ | - | ♦ | 4 | 151759100 |
| PMP 150 SST WALL-MOUNTED | Wall Mounted with SST circulation | - | ♦ | ♦ | ♦ | - | - | 5 | 151757000 |
| PMP 150 CART-MOUNTED | On a cart | ♦ | ♦ | ♦ | ♦ | - | - | 6 | 151754000 |
| Designation | Details | Part number | |
|---|---|---|---|
| STAINLESS FITTING M 1/2 JIC F 3/8 NPS | SST Fitting F 3/8 | 1 | 050123306 |
| COMPLETE SS CIRCULATION ASSEMBLY FOR PMP 150 | Kit to upgrade the pump to a stainless steel circulation | 3 | 151757010 |
| KIT SST SUCCION ROD D.16 W/CONNECTOR 18X125 + STRAINER | SST Suction rod with Ø16 hose, strainer and fitting 18x125 | 4 | 049596010 |
| PMP 150 WALL MOUNTED BRACKET | Bracket to mount the pump on a wall | 5 | 051751030 |
| ENS GRAVITY CUP WITH SUPPORT FOR PMP 150 PRATIK | 2L paint cup with support to mount on the tripod | 8 | 151758100 |
| Designation | Gun | Projector | Paint hoses | Pump | Part number |
|---|---|---|---|---|---|
| KIT PMP150 W/M WITH CIRCULATION + KIT M22 15 EN 3 | M22 P HPA | 15 EN 3 | Ø7 - Length: 7.5m | PMP150 Wall Mounted with SST circulation | 151249050 |
| KIT PMP150 PRATIK WITH KIT M22 15 EN 3 AND GRAVITY CUP | M22 P HPA | 15 EN 3 | Ø7 - Length: 7.5m | PMP150 on a tripod | 151249060 |
| KIT PMP150 WM WITH CIRCULATION + KIT M22 E 3 K HVLP | M22 P HVLP | 09 E3 K HVLP | Ø7 - Length: 7.5m | PMP150 Wall Mounted with SST circulation | 151249090 |
| KIT PMP 150 PRATIK WITH CUP + KIT M22 9 E3 K HVLP | M22 P HVLP | 09 E3 K HVLP | Ø7 - Length: 7.5m | PMP150 on a tripod | 151249100 |
| Designation | Details | Part number | |
|---|---|---|---|
| PACKAGE OF SEALS FOR AIR MOTOR PMP 150 PUMP _1.175 PUMP | Seal kit for the air motor | 1 | 144931091 |
| GRAVITY CUP | 2L paint cup without support to put on the tripod | 2 | 151662355 |
| SET OF SEALS TEFLON PRODUCT. | Seal kit for the fluid section in Teflon | 3 | 144931092 |
| PACKAGE OF SEALS FOR FLUID SECTION PMP 150 PUMP | Seal kit for the fluid section in EPDM | 4 | 144931095 |
| PACKAGE OF SEALS FOR FLUID SECTION PMP 150 PUMP (VITON) | Seal kit for the fluid section in Viton (FPM) | 5 | 144931096 |
Format : application/pdf
Size : 11Mo
Format : application/pdf
Size : 6Mo
