Sames | PMP150 에어스프레이 다이어프램 페인트 펌프

서술

심플한 디자인: 간편한 작동 및 유지 관리
컴팩트 다이어프램 기술: 우수한 피니시를 위한 펄스 없이 일정하게 제공
수용성 및 용제 기반 재료에 맞게 설계됨

► 기술책자

성능

단순하고 견고한 펌프
처리된 유체 섹션으로 인해 수성 소재와 호환 가능

생산성

대형 아웃렛에 힘입어 최대 2,000cc까지 점도가 높은 다양한 소재 사용 가능
유체 섹션에 대한 여러 씰 팩 선택으로 인해 다양한 재료와 호환 가능
플러싱 중 폐기물 감소로 자재 손실 방지

지속가능성

단순하고 최적화된 설계로 쉬운 작동 및 유지 관리
크롬 처리 스테인리스 스틸로 마모 저항 및 저마찰 개선

에어프레이 및 정전식 에어프레이 구성에 사용 가능.

기술 자료표

명칭	수치	단위
압력비	1:1
최대 유체 압력	6 (87)	bar (psi)
최대 공기 압력	6 (87)	bar (psi)
최대 온도	50 (122)	°C (°F)
실린더	100 (3.4)	cc (oz)
사운드 등급	< 70	dBa
30 사이클/mn에서 유체 출력	3 (0.8)	l/min (gal/mn)
자유 유량	19 (5)	l/mn (gal/mn)
4bar에서 30Cycles/mn의 공기 소비량(60psi)	1.1 (0.6)	m³/h (cfm)
공기 흡입구	F 3/8" BSP
유체 배출구	M 3/8" NPS
유체 흡입구	M 18x125
제품 리터당 주기 수	10
높이	24 (9.4)	cm (in)
너비	36 (14.2)	cm (in)
깊이	26 (10.2)	cm (in)
횡격막 폴리우레탄	♦
무게	5 (11)	kg (lbs)

설비

Designation	Setup	Air motor power regulator	Atomization air regulator	Air regulator fluid pressure	Suction rod	Drain rod Ø6x8	Pump output filter		Part number
PMP 150 BARE PUMP	Bare Pump	-	-	-	-	-	-	1	144931000
PMP 150 WALL-MOUNTED	Wall Mounted	♦	♦	♦	-	-	-	2	151759900
PMP 150 WALL-MOUNTED WITH SUCTION ROD	Wall Mounted	♦	♦	♦	♦	-	-	3	151753000
PMP 150 WALL-MOUNTED WITH FILTER	Wall Mounted	♦	♦	♦	♦	-	♦	4	151759100
PMP 150 SST WALL-MOUNTED	Wall Mounted with SST circulation	-	♦	♦	♦	-	-	5	151757000
PMP 150 CART-MOUNTED	On a cart	♦	♦	♦	♦	-	-	6	151754000

부속

Designation	Details		Part number
STAINLESS FITTING M 1/2 JIC F 3/8 NPS	SST Fitting F 3/8	1	050123306
COMPLETE SS CIRCULATION ASSEMBLY FOR PMP 150	Kit to upgrade the pump to a stainless steel circulation	3	151757010
KIT SST SUCCION ROD D.16 W/CONNECTOR 18X125 + STRAINER	SST Suction rod with Ø16 hose, strainer and fitting 18x125	4	049596010
PMP 150 WALL MOUNTED BRACKET	Bracket to mount the pump on a wall	5	051751030
ENS GRAVITY CUP WITH SUPPORT FOR PMP 150 PRATIK	2L paint cup with support to mount on the tripod	8	151758100

세트

Designation	Gun	Projector	Paint hoses	Pump	Part number
KIT PMP150 W/M WITH CIRCULATION + KIT M22 15 EN 3	M22 P HPA	15 EN 3	Ø7 - Length: 7.5m	PMP150 Wall Mounted with SST circulation	151249050
KIT PMP150 PRATIK WITH KIT M22 15 EN 3 AND GRAVITY CUP	M22 P HPA	15 EN 3	Ø7 - Length: 7.5m	PMP150 on a tripod	151249060
KIT PMP150 WM WITH CIRCULATION + KIT M22 E 3 K HVLP	M22 P HVLP	09 E3 K HVLP	Ø7 - Length: 7.5m	PMP150 Wall Mounted with SST circulation	151249090
KIT PMP 150 PRATIK WITH CUP + KIT M22 9 E3 K HVLP	M22 P HVLP	09 E3 K HVLP	Ø7 - Length: 7.5m	PMP150 on a tripod	151249100

부품

Designation	Details		Part number
PACKAGE OF SEALS FOR AIR MOTOR PMP 150 PUMP _1.175 PUMP	Seal kit for the air motor	1	144931091
GRAVITY CUP	2L paint cup without support to put on the tripod	2	151662355
SET OF SEALS TEFLON PRODUCT.	Seal kit for the fluid section in Teflon	3	144931092
PACKAGE OF SEALS FOR FLUID SECTION PMP 150 PUMP	Seal kit for the fluid section in EPDM	4	144931095
PACKAGE OF SEALS FOR FLUID SECTION PMP 150 PUMP (VITON)	Seal kit for the fluid section in Viton (FPM)	5	144931096

기술

다이어프램

격막 펌프는 저압 공기동 분리막 펌프이다

파일

Select all documents

Catalog Airspray Range Sames (English version)

Catalog airspray range sames kremlin

Format : application/pdf
Size : 14Mo

Select the document

General Catalog (only for North American market) Sames

General Catalog North America

Format : application/pdf
Size : 6Mo

Select the document

Instruction manuals

Select all documents

재료

Primer Epoxy

Epoxy primer/sealer is a non-porous finish that is typically recommended as the first base coat over bare steel.

Primer Epoxy Multi-Component

Epoxy primer/sealer multi-component is a non-porous finish base mixed with a hardener that is typically recommended as the first base coat over bare steel.

Primer Polyurethane Multi-Component

Designed to hide profile & surface imperfections, multi-component polyurethane primers & sealers improve adhesion of top coats to the substrate due to the addition of a hardener.

Primer Water-Based

Designed to hide profile & surface imperfections, water-based primers & sealers are environmentally friendly.

Primer Polyurethane

Designed to hide profile & surface imperfections, polyurethane primers & sealers promote adhesion of top coats to the substrate.

Enamel Water-Based

Enamel paint air dries to a hard, typically glossy finish, and is used for coating surfaces that are outdoors or otherwise subject to hard wear or temperature changes.

Moisture-Sensitive Polyurethane Multi-Component

Catalyzed polyurethane clear coats and paints are prized for their durability and versatility around the world. They are used on everything from wood cabinetry, mill work and furniture to planes, trains, and automobiles. They are usually mixed with isocyanates in the hardener. The isocyanate component of polyurethane reacts with moisture in the air and form a hard crystalline structure.

UV Material Epoxy Multi-Component

UV-resistant epoxy systems mixed with hardener cure faster & in moist conditions.

UV Material 100% Solid

UV coatings can be formulated up to 100% solids so that they have no volatile component that contributes to pollution.

UV Material Water-Based

Water-based UV coatings can be considered aesthetically equivalent to bi-component acrylic & polyurethane solvent-based coatings. The range is composed of both pigmented & transparent products.

UV Material Epoxy

UV curable epoxy systems do not require the addition of curing agents. They cure within minutes, or even seconds, and have unlimited working times.

UV Material Polyurethane Multi-Component

The UV polyurethane multi-components are especially designed for very strong UV stability. Mixing with hardener gives very high durability & UV resistance.

UV Material Polyurethane

The UV polyurethanes are especially designed for UV stability, The coating is long lasting, offers excellent substrate protection, provides an attractive finish & is user-friendly.

Top Coat Polyurethane Multi-Component

Polyurethane Top Coat is a two- or three-pack isocyanate-cured polyurethane that gives a durable, high gloss finish. Isocyanates included in the hardener are moisture-sensitive & need a specific process for insulating the circuit.

Top Coat Epoxy

Top Coat Epoxys are used for decorative flooring applications, such as Terrazzo flooring, chip flooring & colored aggregate flooring.

Top Coat Epoxy Multi-Component

Two-part epoxy coatings were developed for heavy duty service on metal substrates & use less energy than heat-cured.

Top Coat Water-Based

Water-based polyurethane is popular because of its low odor & low toxicity. It goes on clear without adding a faint color like oil-based versions do & it dries much faster.

Top Coat Polyurethane

Polyurethane Top Coat gives a durable, high gloss finish.

산성 촉매 폴리우레탄 다성분

멀티 컴포넌트 에폭시산 촉매(AC) 시스템은 건조/경화를 위해 경화제 또는 촉매가 필요하며, 화학 반응이 완료될 때까지 바인더의 경화 과정을 시작하고 유지함으로써 작동한다. 용제는 화학반응이 일어나기 전에 옻칠, 페인트 또는 필러로 마무리된다. 촉매는 습기에 민감하며 Flowmax® 기술 보호가 필요하다.

산성 촉매 에폭시 다중 성분

Multi-Component Epoxy Acid Catalyzing (AC)시스템은 건조/경화를 위해 경화제 또는 촉매가 필요하며, 화학 반응이 완료될 때까지 바인더의 경화 과정을 시작하고 유지함으로써 작동한다. 용제는 화학반응이 일어나기 전에 옻칠, 페인트 또는 필러로 마무리된다. AC 제품의 경화 시간은 열을 가하면 극적으로 빨라질 수 있다.

Metallic Epoxy

The newest metallic epoxy system on the market allows contractors to heighten the effects & make floors look three-dimensional.

Metallic Water-Based

Polyurethane water-based coatings offer a very high chemical/physical resistance & steel effect & are environmentally friendly.

Metallic Epoxy Multi-Component

A two-component 100%-solid epoxy blended with metallic pigments, Metal Fusion is self-leveling, allowing easy application & seamless floor surfaces.

Metallic Polyurethane

Polyurethane coatings are particularly recommended for application to surfaces subject to high levels of wear & tear where excellent chemical/physical resistance is required. The metallic parts will give a steel effect.