REGPro 2in1 Airspray Filter-regulator
- Piloted regulation for a stable fluid output
- 1 product, 2 key functions
- Easy flushing
The REGPro is the 2in1 low pressure filter-regulator from Sames gathering the 2 main functions needed for your spraying systems: regulation and filtration.
The REGPro is designed to provide a low pressure fluid control for all professional painters looking for robustness, reliability and productivity. Its innovative design allows the paint to go first through the filter screen. This prevents any impureties to reach the diaphragm to possibly damage it ensuring its maximum life time. The regulation is therefore always optimal which ensure you a perfect stable flow and thus a high end quality application.
Finally, our EPA Compliant Airspray manual and automatic spray guns, fed by the PRIMA 01D100 and the REGPro, provide an outstanding atomization. You are now ready to spray all types of solventborne, waterborne, high solids and 2K materials.
|무게||1.3 (2.9)||kg (lbs)|
|흡입 압력 최대값||6 (87)||bar (psi)|
|출구 압력 - 조절된 범위||0.5 (7.2) - 4 (58)||bar|
|최대 작업 온도||50 (122)||°C|
|높이||15.6 (6.1)||cm (in)|
|지름(대형 통로)||0.9 (0.4)||cm (in)|
|습식 부품 - 스테인리스강, PTFE, 카바이드||♦|
|제품 최대 유량(대량 통로)||1.9 (0.4)||l/mn (gal/mn)|
|REGPRO 2IN1 FILTER-REGULATOR SCREEN N°06 3/8NPS||155.581.741|
|REGPRO 2IN1 FILTER-REGULATOR SCREEN N°06 1/2JIC||155.581.742|
|LP FILTER WITH SCREEN N°06 OUTLET 3/8 NPS||155.581.641|
|BRACKET FOR REGPRO & LP FILTER||155.581.618|
|FILTER SCREEN N°4 (140 MESH-100µ) FOR LP FILTER AND REGPRO||000.160.104|
|FILTER SCREEN N°6 (85 MESH-168µ) FOR LP FILTER AND REGPRO||000.160.106|
|FILTER SCREEN N°8 (70 MESH-210µ) FOR LP FILTER AND REGPRO||000.160.108|
|FILTER SCREEN N°12 (55 MESH-280µ) FOR LP FILTER AND REGPRO||000.160.112|
|FKM/VITON SEAL FOR REGPRO & LP FILTER||109.420.314|
|O-RING FEP ID 45||909.420.520|
Format : application/pdf
Size : 497Ko
Format : application/pdf
Size : 14Mo
Epoxy primer/sealer is a non-porous finish that is typically recommended as the first base coat over bare steel.
Epoxy primer/sealer multi-component is a non-porous finish base mixed with a hardener that is typically recommended as the first base coat over bare steel.
Designed to hide profile & surface imperfections, multi-component polyurethane primers & sealers improve adhesion of top coats to the substrate due to the addition of a hardener.
Designed to hide profile & surface imperfections, water-based primers & sealers are environmentally friendly.
Designed to hide profile & surface imperfections, polyurethane primers & sealers promote adhesion of top coats to the substrate.
Water-Based Wood Stains have all the advantages of oil-based stains. They spread easily, can be repaired, blend effortlessly & have plenty of open time. The thicker formula allows for controlled penetration, which will reduce blotching on softer woods such as Aspen, Pine & Maple.
A wood stain consists of a colorant suspended or dissolved in an agent or solvent. Colored, or ''stained", finishes do not penetrate the pores of the wood to any significant degree.
Chemical Agent Resistant Coating (CARC) is available in a water-based solution for environmental protection.
Chemical Agent Resistant Coating (CARC) is a paint commonly applied to military vehicles to provide protection against chemical & biological weapons. The surface of the paint is engineered to be easily decontaminated after exposure to chemical warfare & biological warfare agents. The paint is also resistant to damage & removal by decontaminating solutions.
Chemical Agent Resistant Coating (CARC) can be two-component polyurethane paint commonly applied to military vehicles to provide protection against chemical & biological weapons.
Catalyzed polyurethane clear coats and paints are prized for their durability and versatility around the world. They are used on everything from wood cabinetry, mill work and furniture to planes, trains, and automobiles. They are usually mixed with isocyanates in the hardener. The isocyanate component of polyurethane reacts with moisture in the air and form a hard crystalline structure.
UV-resistant epoxy systems mixed with hardener cure faster & in moist conditions.
UV coatings can be formulated up to 100% solids so that they have no volatile component that contributes to pollution.
Water-based UV coatings can be considered aesthetically equivalent to bi-component acrylic & polyurethane solvent-based coatings. The range is composed of both pigmented & transparent products.
UV curable epoxy systems do not require the addition of curing agents. They cure within minutes, or even seconds, and have unlimited working times.
The UV polyurethane multi-components are especially designed for very strong UV stability. Mixing with hardener gives very high durability & UV resistance.
The UV polyurethanes are especially designed for UV stability, The coating is long lasting, offers excellent substrate protection, provides an attractive finish & is user-friendly.
Polyurethane Top Coat is a two- or three-pack isocyanate-cured polyurethane that gives a durable, high gloss finish. Isocyanates included in the hardener are moisture-sensitive & need a specific process for insulating the circuit.
Top Coat Epoxys are used for decorative flooring applications, such as Terrazzo flooring, chip flooring & colored aggregate flooring.
Two-part epoxy coatings were developed for heavy duty service on metal substrates & use less energy than heat-cured.
Water-based polyurethane is popular because of its low odor & low toxicity. It goes on clear without adding a faint color like oil-based versions do & it dries much faster.
멀티 컴포넌트 에폭시산 촉매(AC) 시스템은 건조/경화를 위해 경화제 또는 촉매가 필요하며, 화학 반응이 완료될 때까지 바인더의 경화 과정을 시작하고 유지함으로써 작동한다. 용제는 화학반응이 일어나기 전에 옻칠, 페인트 또는 필러로 마무리된다. 촉매는 습기에 민감하며 Flowmax® 기술 보호가 필요하다.
Multi-Component Epoxy Acid Catalyzing (AC)시스템은 건조/경화를 위해 경화제 또는 촉매가 필요하며, 화학 반응이 완료될 때까지 바인더의 경화 과정을 시작하고 유지함으로써 작동한다. 용제는 화학반응이 일어나기 전에 옻칠, 페인트 또는 필러로 마무리된다. AC 제품의 경화 시간은 열을 가하면 극적으로 빨라질 수 있다.
The newest metallic epoxy system on the market allows contractors to heighten the effects & make floors look three-dimensional.
Polyurethane water-based coatings offer a very high chemical/physical resistance & steel effect & are environmentally friendly.
A two-component 100%-solid epoxy blended with metallic pigments, Metal Fusion is self-leveling, allowing easy application & seamless floor surfaces.
Polyurethane coatings are particularly recommended for application to surfaces subject to high levels of wear & tear where excellent chemical/physical resistance is required. The metallic parts will give a steel effect.
Protection, bonding, finishing & sealing for composite & plastic parts