Sames | e-Jet 2 R

서술

e-Jet 2 R 솔루션은 인체공학, 신뢰성 및 성능을 제공하는 최고의 기술의 조합이다. 파우더 코팅 적용과 운영자 전반의 효율을 개선하고자 하는 기업을 위해 특별히 설계되었다.

e-Jet 2 R은 유체 호퍼가 장착되어 있어 진동 기법에 덜 맞는 분말 코팅 및/또는 중·대규모 생산에 이상적이다.

고성능
향상된 편안함과 인체공학
신뢰성.

총 두 자루와 함께 사용 가능.

► 기술 책자

성능

♦마모 부품을 빠르게 조작 가능
♦펌핑 및 적용 성능 향상 (저공기)
♦색채변경 실적 개선

생산성

♦유지보수 비용 최소화
♦최소 마모 부품 수량
♦최적화된 시간 및 색상 변경 품질
♦정밀도 향상 및 분말절감을 위해 정유량으로 펌핑된 공기

지속 가능성

♦금속 인젝터를 분해하는 데 공구가 필요 없음
♦연결 접근성
♦간단하고 사용하기 쉬운 케이블 및 호스 브래킷
♦큰 휠 2개 및 정방향 휠 2개

기술 자료표

명칭	수치	단위
최대 유체 배출구	200 (6.76)	cc/min (oz/min)
최대 공기 압력	7 (102)	bar (psi)
무게	660 (23.28)	g (oz)

설비

Designation					Part number
e-Jet2 R - 1 gun - 6 m hose					910014685
e-Jet2 R - 1 gun - 12 m hose					910014686
e-Jet2 R2 - 2 guns - 6 m+12 m hoses					910015632

부품

Designation					Part number
Equipped hopper for e-Jet2 R					910014682

기술

Venturi

.

분말 탱크

ATEX 규정

ATEX 규제는 폭발적 대기에서 위험에 처할 가능성이 있는 근로자나 보건의 개선을 목적으로 한다.

코로나 충전

코로나 충전 - 파우더 코팅 기술

파일

Select all documents

Leaflet e-Jet 2 (English version) Sames

Format : application/pdf
Size : 709Ko

Select the document

Catalog Electrostatic Powder range 02-2022 Sames (English version)

Format : application/pdf
Size : 12Mo

Select the document

재료

Mixed or Hybrid

Hybrid powder coatings are a blend of epoxy and polyester resins used primarily for indoor applications. They offer improved penetration into corners and recesses (Faraday Cage areas) and are less sensitive to overbake on curing than many other chemistries, making them suitable for use on appliances, radiators and other temperature-sensitive applications.

Polyester

Polyester Powder Coatings allows long-term exterior durability, high performance mechanical properties & over-bake resistance. Polyester powder is widely used for decorative parts where a good resistance to sunlight (ultraviolet rays) are required. Many automotive trim components & other exterior parts are coated with polyester powders.

Epoxy

Epoxy Powder Coatings allows toughness, corrosion resistance, chemical resistance, flexibility, adhesion & abrasion resistance. Epoxy powder is normally used where a tough, durable film is required with limited exposure to direct sunlight (chalk-like appearance after extended sun exposure).

Acrylic

ACRYLIC resins are typically used in the automotive industry as a clear coat on materials. Acrylic creates a smooth clear coat with very good clarity and provides - better than a clearcoat made of different types of powders - a hard surface that is highly chip-resistant. Acrylic resins are used as additives to promote improved flow and leveling as well as enhanced stain and chemical resistance in polyester hybrid, polyester TGIC, and polyurethane powder coatings. The typical curing cycle is similar to polyester finishes, but may require extra time and temperature for high stain & chemical resistant finishes. Example: 20 minutes @ 190°C (375°F) or 10 minutes @ 204°C (400°F)

Nylon

Nylon is a thermoplastic. Meaning its chemistry does not change when it is melted to the metal part. Nylon will melt and re-melt if the metal part is heated again. Nylon coating powder is aesthetically attractive when applied properly but is never specified simply because it looks good. Costing more than 3 times the typical paint or powder finish, nylon is specified for functionality IE: slip, sound dampening, flange linings, and medical case brackets. Other types of parts we apply nylon to are: drive splines, glove box strikers, door strikers, seat springs, and various clips and clamps used in the aerospace and auto industries. Nylon powder for use in coating metal can be purchased in two chemistries: nylon 11 or nylon 12. What is the difference? The chemist may argue there are plenty of differences, however, practically speaking Nylon 12 is slightly less hygroscopic than Nylon 11 (less than 1%) Nylon 12 typically will have lower gloss, and nylon 12 may be slightly less expensive to purchase depending on the amount ordered. When buying nylon, gloss can not be specified. Generally, nylon 11 is around 70 gloss. Nylon 12 is typically 30 gloss. Gloss level will be the same batch to batch, and will only vary depending on the manufacturing process. Nylon is considered a "softer" coating, easily machinable, but can not be easily marked with a fingernail.

Fluoropolymer

A fluoropolymer is a chemical compound that contains many strong carbon-fluoride bonds. The fluorine in a fluoropolymer is electrically negative, which gives it the property of not bonding easily with other materials. That's what makes a fluoropolymer non-stick. A fluoropolymer is an umbrella term, and it includes many other products with trade names that you may have heard of, including Teflon, Excalibur, Algoflon, Xylan, Solef, and Fluon. The first fluoropolymers was developed in the 1930s, but hundreds of variations now exist. Fluoropolymers are in high demand for use in industrial coatings because they possess some very desirable qualities. First, fluoropolymers have excellent non-stick properties, as evidenced by their use in non-stick cookware. Also, fluoropolymers reduce friction and resist corrosion. They withstand very high temperatures, as well. Fluoropolymers are insulators, meaning they do not conduct electricity. They do not absorb water, either. This combination of factors makes them ideal for use in electronics, automotives, and many other uses. Fluoropolymer resins are top of line for exterior weatherability and UV stability in both powder and liquid coatings. Fluoropolymer powder coatings are purposely tailored for the architectural market and offer a long-life durable finish. Fluoropolymer powder coat resin systems can be formulated to meet the requirements of the high performance AAMA 2605 specification. These finishes are resistant to moisture, weathering, ozone and UV radiation. An application for this finish would include architectural projects that require long term cosmetic and functional protection.

Polyvinyl Chloride

PVC based coatings offer many advantages over the other thermoplastic materials available as binders for coating production. These coatings have very good resistance to many solvents, which is a rather poor characteristic of the thermoplasts, combined with resistance towards water and acids. They have excellent impact resistance, salt spray resistance, food staining resistance, and good dielectric strength for electrical applications. Polyvinyl chloride is one of the cheapest polymers produced by the industry on a large scale. Its basic properties include chemical and corrosion resistance, good physical strength and good electrical insulation. Polyvinyl chloride (PVC) is by nature a brittle polymer, but the flexibility of the material can be easily adjusted by using an appropriate amount of a suitable plasticizer.

Polyurethane

Polyurethane powders have excellent flow characteristics with excellent chemical and mechanical properties. Outstanding corrosion resistance and excellent external exposure properties make them suitable alternative to polyester powders. GENERAL FEATURES Polyurethane powder contains polyurethanic resins cured with curing agents. The powder forms protective and decorative film along with enhanced outdoor resistance. The protective film have good resistance to mechanical damage, detergents, fuels and oils.

Inorganic

Inorganic powders do not contain carbon compounds. They only contain powders and by-products of inorganic material. Metal powders are inorganic by nature. Some of them can be made from different kind of stones like chalk, diamond or talc.

시장 부야