M22 HPA 수동 에어스프레이 건

M22 HPA는 도장을 원자화하기 위해 고안된 흡입식 재래식 총이다. 공업용 완전 금속 솔루션(컵 + 건)을 제공한다.

뛰어난 원자화 품질
저-중간 점도 소재
컵 디자인 덕분에 사용 편의성 향상

► 기술책자

구매 하기

Associated informations
- 서술
- 설비
- 부속
- 부품
- 기술
- 파일
- Instruction manuals
- 재료
- 시장 부야

서술

뛰어난 원자화 품질
저-중간 점도 소재
컵 디자인 덕분에 사용 편의성 향상

► 기술책자

성능

♦고광택 표면를 위한 매우 미세한 원자화
♦핸들에서의 공기출력 조절

생산성

1 매우 편안한 그립감으로 인한 인체공학적
2 EZ-원형 조정으로 회전 조정
♦인라인 공기 밸브로 인한 트리거력 감소
♦ 범주에서 가장 가벼운 수동 스프레이 건 중 하나이며 완벽하게 균형 잡힌 제품: 반복적인 변형률 부상(RSI) 감소)
♦프로젝터(에어캡 + 노즐 + 니들) 및 스테인리스강 유체 통로(대범위 용제 및 수성 소재와 호환 가능)의 범위가 넓어 모든 용도에 사용 가능

지속가능성

♦Sames의 가공 프로젝터(에어캡 + 노즐 + 니들)와 함께 고급 소재(스테인레스강, 양극화 단조 알루미늄 본체, 황동)로 설계되어 제품 수명이 연장됨
♦부품 수를 줄이면 쉽고 빠른 유지보수를 할 수
♦바닥 컵이 평평한 덕분에 두 번의 분사 작업 사이 어디에서나 홀로 고정됨

M22 HPA는 사용자에게 매우 편안하게 코팅의 분무화를 어렵게 한다.

기술 자료표

명칭	수치	단위
최대 유체 배출구	270 (9.5)	cc/min (oz/min)
최소 유체 배출구	100 (3.5)	cc/min (oz/min)
최대 공기 압력	6 (87)	bar (psi)
추천 공기 압력 (min)	2.5 (36.2)	bar (psi)
공기 소비량	23 - 29.7 (11.9 - 17.5)	m3/h (cfm)
전송 효율성	62	%
최대 유체 온도	50 (122)	°C (°F)
공기 흡입구	M 1/4" NPS
유체 흡입구	M 3/8" NPS
스테인리스 스틸, 알루미늄 습식 부품	♦
PH	5-8
팁/노즐	♦
유체 회전 피팅(버전에 따라 사용 가능)	♦
무게	980 (34.6)	g (oz)

설비

Designation					Part number
M22 a hpa					136145200
M22 a hpa					136145211
M22 a hpa					136145212
M22 a hpa					136145213

부속

Designation					Part number
Projector					031145011
Projector					031145012
Projector					031145013
Projector					031145030
Projector					031145031
Aircap					132145100
Aircap					132145800
Nozzle					134130600
Nozzle					134130700
Needle					033140100
Needle					033140200
NEEDLE					033140300
Nozzle					134130300
Nozzle					134131100
Nozzle					134131200

부품

Designation	Details		Part number
SERVICING KIT FOR M22P	Maintenance pack (includes a pack of seals + gun components)	2	129140902

기술

에어스프래이 HPA™

HPA는 고출력 원자화를 제공하는 에어스프레이 기술이다.

파일

Select all documents

Leaflet M22 A-G Manual Airspray Spray Gun (English version) Sames

Format : application/pdf
Size : 482Ko

Select the document

Catalog Airspray Range Sames (English version)

Format : application/pdf
Size : 14Mo

Select the document

General Catalog (only for North American market) Sames

General Catalog North America

Format : application/pdf
Size : 6Mo

Select the document

Instruction manuals

Select all documents

재료

Primer Epoxy

Epoxy primer/sealer is a non-porous finish that is typically recommended as the first base coat over bare steel.

Primer Epoxy Multi-Component

Epoxy primer/sealer multi-component is a non-porous finish base mixed with a hardener that is typically recommended as the first base coat over bare steel.

Primer Polyurethane Multi-Component

Designed to hide profile & surface imperfections, multi-component polyurethane primers & sealers improve adhesion of top coats to the substrate due to the addition of a hardener.

Primer Water-Based

Designed to hide profile & surface imperfections, water-based primers & sealers are environmentally friendly.

Primer Polyurethane

Designed to hide profile & surface imperfections, polyurethane primers & sealers promote adhesion of top coats to the substrate.

Water-Based Stains

Water-Based Wood Stains have all the advantages of oil-based stains. They spread easily, can be repaired, blend effortlessly & have plenty of open time. The thicker formula allows for controlled penetration, which will reduce blotching on softer woods such as Aspen, Pine & Maple.

Solvent-Based Stains

A wood stain consists of a colorant suspended or dissolved in an agent or solvent. Colored, or ''stained", finishes do not penetrate the pores of the wood to any significant degree.

CARC Polyurethane Multi-Component

Chemical Agent Resistant Coating (CARC) can be two-component polyurethane paint commonly applied to military vehicles to provide protection against chemical & biological weapons.

UV Material Epoxy Multi-Component

UV-resistant epoxy systems mixed with hardener cure faster & in moist conditions.

UV Material Epoxy

UV curable epoxy systems do not require the addition of curing agents. They cure within minutes, or even seconds, and have unlimited working times.

Top Coat Polyurethane Multi-Component

Polyurethane Top Coat is a two- or three-pack isocyanate-cured polyurethane that gives a durable, high gloss finish. Isocyanates included in the hardener are moisture-sensitive & need a specific process for insulating the circuit.

Top Coat Epoxy

Top Coat Epoxys are used for decorative flooring applications, such as Terrazzo flooring, chip flooring & colored aggregate flooring.

Top Coat Epoxy Multi-Component

Two-part epoxy coatings were developed for heavy duty service on metal substrates & use less energy than heat-cured.

Top Coat Water-Based

Water-based polyurethane is popular because of its low odor & low toxicity. It goes on clear without adding a faint color like oil-based versions do & it dries much faster.

Top Coat Polyurethane

Polyurethane Top Coat gives a durable, high gloss finish.

Metallic Epoxy

The newest metallic epoxy system on the market allows contractors to heighten the effects & make floors look three-dimensional.

Metallic Water-Based

Polyurethane water-based coatings offer a very high chemical/physical resistance & steel effect & are environmentally friendly.

Metallic Epoxy Multi-Component

A two-component 100%-solid epoxy blended with metallic pigments, Metal Fusion is self-leveling, allowing easy application & seamless floor surfaces.

Metallic Polyurethane

Polyurethane coatings are particularly recommended for application to surfaces subject to high levels of wear & tear where excellent chemical/physical resistance is required. The metallic parts will give a steel effect.