M22 G HTI 수동 에어스프레이 건 중력

M22 G HTI는 표면 품질과 전송 효율을 탁월한 운영자의 편안함과 결합하여 사용자가 선호하는 선택권을 갖는다.

높은 전송 효율성(최대 74%)
완벽한 밸런스 팬: 뛰어난 분무 품질
완벽한 균형 잡힌 신체: 향상된 인체공학

► 기술책자

구매 하기

Associated informations
- 서술
- 설비
- 부속
- 기술
- 파일
- 재료
- 시장 부야

서술

높은 전송 효율성(최대 74%)
완벽한 밸런스 팬: 뛰어난 분무 품질
완벽한 균형 잡힌 신체: 향상된 인체공학

► 기술책자

성능

♦과잉스프레이 감소 및 완벽한 밸런스팬
♦높은 원자화 수준

생산성

♦매우 편안한 바디 디자인으로 인한 인체공학 적
♦EZ-원형 조정으로 회전 조정
♦인라인 공기 밸브로 인한 트리거력 감소
♦범주에서 가장 가벼운 수동 스프레이 건 중 하나이며 완벽하게 균형 잡힌 제품: 반복적인 변형률 부상(RSI) 감소)
♦프로젝터(에어캡 + 노즐 + 니들) 및 스테인리스강 유체 통로(대범위 용제 및 수성 소재와 호환 가능)의 범위가 넓어 모든 용도에 사용 가능

지속 가능성

♦Sames의 가공 프로젝터(에어캡 + 노즐 + 니들)와 함께 고급 소재(스테인레스강, 양극화 단조 알루미늄 본체, 황동)로 설계되어 제품 수명이 연장됨
♦부품 수를 줄이면 쉽고 빠른 유지보수를 할 수

M22 G HTI는 재료 절약, 스프레이 품질, 사용 편의성 등을 결합하여 독특한 솔루션이다.

기술 자료표

명칭	수치	단위
최대 유체 배출구	280 (9.5)	cc/min (oz/min)
최소 유체 배출구	141 (4.9)	cc/min (oz/min)
최대 공기 압력	6 (87)	bar (psi)
추천 공기 압력 (min)	2.5 (36.2)	bar (psi)
공기 소비량	20.2 (11.9)	m3/h (cfm)
전송 효율성	74	%
최대 유체 온도	50 (122)	°C (°F)
공기 흡입구	M 1/4" NPS
습식 부품, 스테인리스 스틸	♦
추천 재료 점도 범위	20-40	s CA4
PH	5-8
팁/노즐	♦
무게	680 (21.9)	g (oz)

설비

Designation					Part number
M22 g hvlp - hti					136130100
M22g hti					136130111
M22g hti					136130112
M22g hti					136130113
M22g hti					136130114
M22g hti					136130115
M22g hti					136130116
M22 g hvlp - hti					136131100
M22g hti					136131111
M22g hti					136131112
M22g hti					136131113
M22g hti					136131114
M22g hti					136131115
M22g hti					136131116

부속

Designation					Part number
Projector					031130011
Projector					031130012
Projector					031130013
Projector					031130014
Projector					031130015
Projector					031130016
Needle					033130100
Needle					033130200
Needle					033130300
Aircap					132130300
Nozzle					134130400
Nozzle					134130500
Nozzle					134130800

기술

에어스프레이 HTI™

HTI 에어스프레이 기술은 2개의 에어캡(E HVLP Aircap & EP LVLP Aircap)을 적용하여 저점도에서 중점도의 소재에 탁월한 피니시 품질을 제공한다.

파일

Select all documents

Leaflet M22 A-G Manual Airspray Spray Gun (English version) Sames

Format : application/pdf
Size : 482Ko

Select the document

Catalog Airspray Range Sames (English version)

Catalog airspray range sames kremlin

Format : application/pdf
Size : 14Mo

Select the document

General Catalog (only for North American market) Sames

General Catalog North America

Format : application/pdf
Size : 6Mo

Select the document

재료

Primer Epoxy

Epoxy primer/sealer is a non-porous finish that is typically recommended as the first base coat over bare steel.

Primer Epoxy Multi-Component

Epoxy primer/sealer multi-component is a non-porous finish base mixed with a hardener that is typically recommended as the first base coat over bare steel.

Primer Polyurethane Multi-Component

Designed to hide profile & surface imperfections, multi-component polyurethane primers & sealers improve adhesion of top coats to the substrate due to the addition of a hardener.

Primer Water-Based

Designed to hide profile & surface imperfections, water-based primers & sealers are environmentally friendly.

Primer Polyurethane

Designed to hide profile & surface imperfections, polyurethane primers & sealers promote adhesion of top coats to the substrate.

Water-Based Stains

Water-Based Wood Stains have all the advantages of oil-based stains. They spread easily, can be repaired, blend effortlessly & have plenty of open time. The thicker formula allows for controlled penetration, which will reduce blotching on softer woods such as Aspen, Pine & Maple.

Solvent-Based Stains

A wood stain consists of a colorant suspended or dissolved in an agent or solvent. Colored, or ''stained", finishes do not penetrate the pores of the wood to any significant degree.

CARC Polyurethane Multi-Component

Chemical Agent Resistant Coating (CARC) can be two-component polyurethane paint commonly applied to military vehicles to provide protection against chemical & biological weapons.

Moisture-Sensitive Polyurethane Multi-Component

Catalyzed polyurethane clear coats and paints are prized for their durability and versatility around the world. They are used on everything from wood cabinetry, mill work and furniture to planes, trains, and automobiles. They are usually mixed with isocyanates in the hardener. The isocyanate component of polyurethane reacts with moisture in the air and form a hard crystalline structure.

Top Coat Polyurethane Multi-Component

Polyurethane Top Coat is a two- or three-pack isocyanate-cured polyurethane that gives a durable, high gloss finish. Isocyanates included in the hardener are moisture-sensitive & need a specific process for insulating the circuit.

Top Coat Epoxy

Top Coat Epoxys are used for decorative flooring applications, such as Terrazzo flooring, chip flooring & colored aggregate flooring.

Top Coat Epoxy Multi-Component

Two-part epoxy coatings were developed for heavy duty service on metal substrates & use less energy than heat-cured.

Top Coat Water-Based

Water-based polyurethane is popular because of its low odor & low toxicity. It goes on clear without adding a faint color like oil-based versions do & it dries much faster.

Top Coat Polyurethane

Polyurethane Top Coat gives a durable, high gloss finish.

Metallic Epoxy

The newest metallic epoxy system on the market allows contractors to heighten the effects & make floors look three-dimensional.

Metallic Water-Based

Polyurethane water-based coatings offer a very high chemical/physical resistance & steel effect & are environmentally friendly.

Metallic Epoxy Multi-Component

A two-component 100%-solid epoxy blended with metallic pigments, Metal Fusion is self-leveling, allowing easy application & seamless floor surfaces.

Metallic Polyurethane

Polyurethane coatings are particularly recommended for application to surfaces subject to high levels of wear & tear where excellent chemical/physical resistance is required. The metallic parts will give a steel effect.