M22 P HTI 수동 에어스프레이 압력식

M22 P HTI는 뛰어난 조작자의 편안함으로 우수한 마감 품질과 전송 효율을 보장한다. 우리는 새로운 공기 및 페인트 호스를 사용하여 솔루션 "건 + 호스"의 인체공학적 특성을 충분히 누릴 것을 강력히 권고한다.

높은 전송 효율성(최대 72%)
좋은 스프레이 품질
새 호스와 함께 사용할 때 매우 좋은 기동성

► 기술책자

구매 하기

Associated informations
- 서술
- 설비
- 부속
- 세트
- 부품
- 기술
- 파일
- 재료
- 시장 부야

서술

높은 전송 효율성(최대 72%)
좋은 스프레이 품질
새 호스와 함께 사용할 때 매우 좋은 기동성

► 기술책자

성능

♦저점도 재료에 대한 미세 분무
♦과잉스프레이 감소 및 완벽한 밸런스팬

생산성

♦매우 편안한 바디 디자인으로 인한 인체공학적
♦EZ-원형 조정으로 회전 조정
♦인라인 공기 밸브로 인한 트리거력 감소
♦범주에서 가장 가벼운 수동 스프레이 건 중 하나이며 완벽하게 균형 잡힌 제품: 반복적인 변형률 부상(RSI) 감소)
♦프로젝터(에어캡 + 노즐 + 니들) 및 스테인리스강 유체 통로(대범위 용제 및 수성 소재와 호환 가능)의 범위가 넓어 모든 용도에 사용 가능

지속가능성

♦Sames의 가공 프로젝터(에어캡 + 노즐 + 니들)와 함께 고급 소재(스테인레스강, 양극화 단조 알루미늄 본체, 황동)로 설계되어 제품 수명이 연장됨
♦부품 수를 줄이면 쉽고 빠른 유지보수를 할 수

M22 P HTI는 매우 멋진 인체공학과 함께 좋은 성과를 보여준다.

기술 자료표

명칭	수치	단위
최대 유체 압력	6 (87)	bar (psi)
최대 유체 배출구	400 (14)	cc/min (oz/min)
최소 유체 배출구	200 (7)	cc/min (oz/min)
최대 공기 압력	6 (87)	bar (psi)
추천 공기 압력 (min)	2.5 (36.2)	bar (psi)
공기 소비량	23 - 29 (11.9 - 17.1)	m3/h (cfm)
전송 효율성	72	%
최대 유체 온도	50 (122)	°C (°F)
공기 흡입구	M 1/4" NPS
유체 흡입구	M 3/8" NPS
습식 부품, 스테인리스 스틸	♦
PH	5 - 8
팁/노즐	♦
무게	520 (18.3)	g (oz)

설비

Designation					Part number
M22p hti					135140216
M22p hvlp - hti					135140200
M22p hti					135140211
M22p hti					135140212
M22p hti					135140213
M22p hti					135140217

부속

Designation					Part number
Projector					031140011
Projector					031140012
Projector					031140013
Projector					031140016
Projector					031140017
Needle					033140100
Needle					033140200
Aircap					132140300

세트

Designation					Part number
Kit m22 p 12 ep 3 + 7.5m air & fluid hoses dia. 7					151260785

부품

Designation	Details		Part number
SERVICING KIT FOR M22P	Maintenance pack (includes a pack of seals + gun components)	8	129140902

기술

에어스프레이 HTI™

HTI 에어스프레이 기술은 2개의 에어캡(E HVLP Aircap & EP LVLP Aircap)을 적용하여 저점도에서 중점도의 소재에 탁월한 피니시 품질을 제공한다.

파일

Select all documents

Leaflet M22 A-G Manual Airspray Spray Gun (English version) Sames

leaflet M22 Airspray

Format : application/pdf
Size : 482Ko

Select the document

Catalog Airspray Range Sames (English version)

Catalog airspray range sames kremlin

Format : application/pdf
Size : 14Mo

Select the document

General Catalog (only for North American market) Sames

General Catalog North America

Format : application/pdf
Size : 6Mo

Select the document

재료

Primer Epoxy

Epoxy primer/sealer is a non-porous finish that is typically recommended as the first base coat over bare steel.

Primer Epoxy Multi-Component

Epoxy primer/sealer multi-component is a non-porous finish base mixed with a hardener that is typically recommended as the first base coat over bare steel.

Primer Polyurethane Multi-Component

Designed to hide profile & surface imperfections, multi-component polyurethane primers & sealers improve adhesion of top coats to the substrate due to the addition of a hardener.

Primer Water-Based

Designed to hide profile & surface imperfections, water-based primers & sealers are environmentally friendly.

Primer Polyurethane

Designed to hide profile & surface imperfections, polyurethane primers & sealers promote adhesion of top coats to the substrate.

Water-Based Stains

Water-Based Wood Stains have all the advantages of oil-based stains. They spread easily, can be repaired, blend effortlessly & have plenty of open time. The thicker formula allows for controlled penetration, which will reduce blotching on softer woods such as Aspen, Pine & Maple.

Solvent-Based Stains

A wood stain consists of a colorant suspended or dissolved in an agent or solvent. Colored, or ''stained", finishes do not penetrate the pores of the wood to any significant degree.

CARC Polyurethane Multi-Component

Chemical Agent Resistant Coating (CARC) can be two-component polyurethane paint commonly applied to military vehicles to provide protection against chemical & biological weapons.

Moisture-Sensitive Polyurethane Multi-Component

Catalyzed polyurethane clear coats and paints are prized for their durability and versatility around the world. They are used on everything from wood cabinetry, mill work and furniture to planes, trains, and automobiles. They are usually mixed with isocyanates in the hardener. The isocyanate component of polyurethane reacts with moisture in the air and form a hard crystalline structure.

Top Coat Polyurethane Multi-Component

Polyurethane Top Coat is a two- or three-pack isocyanate-cured polyurethane that gives a durable, high gloss finish. Isocyanates included in the hardener are moisture-sensitive & need a specific process for insulating the circuit.

Top Coat Epoxy

Top Coat Epoxys are used for decorative flooring applications, such as Terrazzo flooring, chip flooring & colored aggregate flooring.

Top Coat Epoxy Multi-Component

Two-part epoxy coatings were developed for heavy duty service on metal substrates & use less energy than heat-cured.

Top Coat Water-Based

Water-based polyurethane is popular because of its low odor & low toxicity. It goes on clear without adding a faint color like oil-based versions do & it dries much faster.

Top Coat Polyurethane

Polyurethane Top Coat gives a durable, high gloss finish.

Metallic Epoxy

The newest metallic epoxy system on the market allows contractors to heighten the effects & make floors look three-dimensional.

Metallic Water-Based

Polyurethane water-based coatings offer a very high chemical/physical resistance & steel effect & are environmentally friendly.

Metallic Epoxy Multi-Component

A two-component 100%-solid epoxy blended with metallic pigments, Metal Fusion is self-leveling, allowing easy application & seamless floor surfaces.

Metallic Polyurethane

Polyurethane coatings are particularly recommended for application to surfaces subject to high levels of wear & tear where excellent chemical/physical resistance is required. The metallic parts will give a steel effect.