Sames | 16C240 Airmix® Paint Pump

Description

Heavy duty air changeover valves.
Used for circulation and/or multiple guns.
Very large choice of seals and packing materials (Leather, PU, UHMW…).

► Technical manual

Performance:

♦High output to feed several guns
♦High suction power

Productivity:

♦Ideal for most materials

Sustainability:

♦Triple chrome piston & cylinder, stainless steel ball & carbide seat for long-term use
♦Sleek design with minimal parts. The inversion system provides a fast changeover for constant material delivery

For medium output applications and automatic machines.

Technical data table

Designation	Value	Unit: metric (US)
Pressure Ratio	16/1
Maximum Fluid Pressure	96 (1392)	bar (psi)
Maximum Air Pressure	6 (87)	bar (psi)
Air Consumption	41.5 (24.4)	m³/h (cfm)
Maximum Temperature	60 (140)	°C (°F)
Cylinder	240 (8.11)	cc (oz)
Sound Level	76	dBa
Recommended Air Pressure	2 - 5 (29 - 72.5)	bar (psi)
Fluid Output at 30 cycles/mn	7.20 (1.9)	l/min (gal/mn)
Fluid Output at 20 cycles/mn	4.8 (1.27)	l/mn (gal/mn)
Fluid Volume per Cycle	240 (8.12)	cc
Free Flow Rate	14.4 (3.8)	l/mn (gal/mn)
Fluid Output at 15 cycles / mn	3.6 (0.95)	l/mn (gal/mn)
Air Consumption at 30 cycles/mn at 4 bar (60 psi)	41.5	m³/h (cfm)
Displacement Per Cycle	240 (14.64)	cc (cubic inch)
Motor Type	2000-4 / 2000-4T
Air Inlet	F3/8" NPS - M3/4" NPS / F3/4" BSP
Fluid Outlet	M1/2" NPS / M1/2" JIC
Fluid Inlet	F 1" BSP / M 26 x 125
Number of Cycles per liter of products	4
Sealing Packing Lower PEHD	♦
Sealing Packing Upper PTFE G - Polyfluid	♦
Wetted Parts: Hard Chrome SST, Standard SST, Carbide	♦
Weight	27 (59.5)	kg (lbs)

Equipment

Designation	Setup	Fluid inlet	Suction rod	Drain rod	Paint filter	Air regulator	Upper Seal	Lower seal	Part number
AIRMIX® PUMP 16C240 BARE	Bare	F 1 BSPP	-	-	-	-	Chevron	UHMW	151790000
AIRMIX® PUMP 16C240 W/M W/O FILTER W/O SUCTION	Wall mounted	M 26x125	-	-	-	2	Chevron	UHMW	151790100
AIRMIX® PUMP 16C240 W/M WITH FILTER AND SUCTION DIAM 23	Wall mounted	M 26x125	Ø23	♦	♦	2	Chevron	UHMW	151790200
AIRMIX® PUMP 16C240 TURBO W/M W/O FILTER W/O SUCTION	Wall-mounted, Turbo	M 26x125	-	-	-	2	Chevron	UHMW	151797100

Accessories

Designation				Part number
Two Post Cart w/o plate				051221000
Pump Mounting Plate with straps				056100199
Fluid filter 3/8 Mesh 6				155580300
Stainless steel Suction rod Ø23 M26 plunging tube length elbowed 570 mm				149596150
Stainless steel Suction rod Ø23 M26 plunging tube length 1000mm elbowed (for 200 liters drums)				149596160
Stainless steel drain rod Ø16 elbowed F18 x 125				049596000

Spare Parts

Designation				Part number
Seal kit for 2000-4 air motor including reversing-block seals				146270990
Full maintenance kit for 2000-4 air motor including reversing-block seals				146270996
GT Cartridge kit				144710100
Seal kit for C240 hydraulic section (Chevron/UHMW)				144970090
Full maintenance kit C240 hydraulic section (Chevron/UHMW)				144970095
Chevron seal, UHMW				909051102
Leather seal (pack of 10)				109050603
Adaptation assembly for Polyurethane (PU) seals				144970260
Seal kit for C240 hydraulic section (PU/PU)				144970265
Ball Ø 16, 316L stainless steel				907414142

Technologies

Turbo Motor

Prevents the formation of ice on the engine of the pump during extensive use.

Chevron Sealing

A Chevron packing set independently reacts to pressure & automatically affects a seal.

Cup Lub

A pump has a cup filled with lubricant at the top of the liquid section.

2 Ball

2 ball pumping technology is highly utilized in fluid sections with one ball / seat for suction & the other ball / seat for feeding.

Triple Chrome Layer

This is a special treatment for very high sustainability & is applied to the piston of the fluid section of a pump.

Documents

Select all documents

Airmix® Catalog 2020 Sames

Format : application/pdf
Size : 7Mo

Select the document

16C240

Format : application/pdf
Size : 447Ko

Select the document

Instruction Manuals

Select all documents

16C240 / 16C240T | User manual

Format : application/pdf
Size : 3Mo

Select the document

Materials

Primer Water-Based

Designed to hide profile & surface imperfections, water-based primers & sealers are environmentally friendly.

Primer Polyurethane

Designed to hide profile & surface imperfections, polyurethane primers & sealers promote adhesion of top coats to the substrate.

Solvent-Based Stains

A wood stain consists of a colorant suspended or dissolved in an agent or solvent. Colored, or ''stained", finishes do not penetrate the pores of the wood to any significant degree.

Top Coat Polyurethane Multi-Component

Polyurethane Top Coat is a two- or three-pack isocyanate-cured polyurethane that gives a durable, high gloss finish. Isocyanates included in the hardener are moisture-sensitive & need a specific process for insulating the circuit.

Top Coat Water-Based

Water-based polyurethane is popular because of its low odor & low toxicity. It goes on clear without adding a faint color like oil-based versions do & it dries much faster.

Top Coat Polyurethane

Polyurethane Top Coat gives a durable, high gloss finish.

Acid Catalyst Polyurethane Multi-Component

Multi-Component Epoxy Acid Catalyzing (AC) systems require a hardener or catalyst to dry/cure, which works by starting & maintaining the binder's curing process until the chemical reaction is complete. The solvent evaporates prior to & during the chemical reaction concluding a final film of lacquer, paint or filler. The catalyst is moisture-sensitive and requires a Flowmax® technology protection.

Acid Catalyst Epoxy Multi-Component

Multi-Component Epoxy Acid Catalyzing (AC) systems require a hardener or catalyst to dry/cure, which works by starting & maintaining the binder's curing process until the chemical reaction is complete. The solvent evaporates prior to & during the chemical reaction concluding a final film of lacquer, paint or filler. Curing times of AC products can be dramatically accelerated with heat application.

Markets