35C50 Airmix® Paint pump
- Suction rod or gravity hopper
- Available in kits with one or two air regulators
- Good chemical compatibility with GT or MB-A cartridges
The 35C50 Airmix® paint pump will deliver excellent performance and outstanding benefits due to our 90 plus years on knowhow. With a powerful air motor, the 35C50 can feed up to (2) Airmix® or (2) SFlow™ Airless® spray guns. It can handle material viscosities from 20 cps up to 5000 cps with very low air consumption. It comes with an optimized fluid section volume for fast colour changes with minimal material loss.
The 35C50 Airmix® paint pump packages are available in wall-mount versions or cart mounting as an option. Packages are available with (1) Xcite® 240 bar Airmix® manual spray gun equipped with a spray tip and 7.5 m (25ft) air and fluid hoses. An Airless version with the SFlow™ spray gun along with a Skill™ for Airless® Fine Finish applications is also available (see dedicated page). A wide variety of options are available to meet all customer requirements.
Designation | Value | Unit: metric (US) |
---|---|---|
Pressure Ratio | 35 | |
Maximum Fluid Pressure | 210 (3000) | bar (psi) |
Recommended Fluid Output | 1500 (0.4 gal/min) | cc/mn (cfm) |
Maximum Fluid Output | 3000 (0.8 gal/min) | cc/mn (cfm) |
Maximum Air Pressure | 6 (87) | bar (psi) |
Air Consumption | 15 | m³/h (cfm) |
Maximum Temperature | 60 (140) | °C (°F) |
Fluid Output at 30 cycles/mn | 1.5 (0.4) | l/min (gal/mn) |
Fluid Volume per Cycle | 50 (0.013 gal) | cc |
Free Flow Rate | 5 (1.3) | l/mn (gal/mn) |
Fluid Output at 15 cycles / mn | 750 (0.19 gal/min) | l/mn (gal/mn) |
Height | 58.5 (23) | cm (in) |
Width | 23.5 (9.05) | cm (in) |
Depth | 23.5 (9.05) | cm (in) |
Wetted Shares: Stainless Steel | ♦ | |
Weight | 8 | kg (lbs) |
Designation | Cartridge | Fluid Inlet fitting | Suction | Drain rod | Atomizing air regulator | Fluid pressure regulator | Filter pump output | Hoses | Part number |
---|---|---|---|---|---|---|---|---|---|
35C50 F1/2 wo Filter wo Rod | MB-A | F1/2 BSP | - | - | 1 | • | - | - | 151148000 |
35C50 M26x125 wo Rod wo filter | MB-A | M26x125 | - | - | 1 | • | - | - | 151148050 |
35C50 M26x125 + Rod wo Filter | MB-A | M26x125 | D25 | - | 1 | • | - | - | 151148250 |
35C50 M26x125 + Rod + Filter | MB-A | M26x125 | D25 | • | 1 | • | • | - | 151148100 |
Designation | Part number | ||
---|---|---|---|
System, 35C50, W/M, C/W Xcite®+ 240, 5G Rod, Filter, 25Ft. | 668-148-000 | ||
System, 35C50, W/M, C/W Xcite®+ 240, 5G Rod, Filter, 50Ft. | 668-148-001 | ||
System, 35C50, W/M, C/W Xcite 200, 6L Hopper, Filter, 25Ft. | 668-148-002 | ||
System, 35C50, W/M, C/W Xcite 200, 6L Hopper, Filter, 50Ft. | 668-148-003 | ||
System, 35C50, C/M, C/W Xcite 200, 5G Rod, Filter, 25Ft. | 668-148-100 | ||
System, 35C50, C/M, C/W Xcite 200, 5G Rod, Filter, 50Ft. | 668-148-101 | ||
System, 35C50, C/M, C/W Xcite 200, 6L Hopper, Filter, 25Ft. | 668-148-102 | ||
System, 35C50, C/M, C/W Xcite 200, 6L Hopper, Filter, 50Ft. | 668-148-103 | ||
System, 35C50, W/M, C/W Xcite 200, 55G Rod, Filter, 25Ft. | 668-148-200 | ||
System, 35C50, W/M, C/W Xcite 200, 55G Rod, Filter, 50Ft. | 668-148-201 |
Designation | Part number | |||
---|---|---|---|---|
Tripod | 151140210 | |||
Wall-mounted totem | 151140240 | |||
Dismountable trolley | 151241000 | |||
Gravity hopper 6 liters | 151140230 | |||
Stainless steel Suction rod Ø23 M26 plunging tube length elbowed 570 mm | 149596150 | |||
Stainless steel Suction rod Ø23 M26 plunging tube length 1000mm elbowed (for 200 liters drums) | 149596160 | |||
Stainless steel drain rod Ø16 elbowed F18 x 125 | 049596000 | |||
Fluid filter Mesh 6 3/8 (Inlet F1/2"JIC - Outlet M1/2"JIC) | 155580600 |
Designation | Maximum output pressure(bar (psi)) | Gun type | Tip | Hoses included | Swivel fitting | Mounting | Packing material | Output filter | Suction rod | Part number |
---|---|---|---|---|---|---|---|---|---|---|
PACK 35C50 W/M MBA SUC D25 XCITE®+240 TWIST H7.5+12.114 NO FI | 210 (3045) | Xcite®+ 240 | 12-114 | 7.5 m (24 ft) | • | Wall | MB-A | - | Ø 23 | 151148400 |
PACK35C50 W/M MBA SUC D25 FILTER XCITE®+240 TWIST H7.5+12.114 | 210 (3045) | Xcite®+ 240 | 12-114 | 7.5 m (24 ft) | • | Wall | MB-A | • | Ø 23 | 151148450 |
PACK 35C50 2G W/M MBA SUC D25+FIL 2/XCITE®+240+2/09114+2/H7.5 | 210 (3045) | 2 x Xcite®+ 240 | 2 x 09-114 | 2 x 7.5 m (24 ft) | 2 | Wall | MB-A | • | Ø 23 | 151148650 |
Designation | Part number | |||
---|---|---|---|---|
Servicing kit for 970-4 motor | 144160191 | |||
Reversing kit | 144130191 | |||
GT Cartridge kit | 144135205 | |||
GT cartridge and piston kit | 144135291 | |||
MB-A Cartridge kit | 144135365 | |||
MB-A cartridge and piston kit | 144135389 | |||
Servicing kit C50 fluid section | 144135237 |
Format : application/pdf
Size : 494Ko
Format : application/pdf
Size : 7Mo
Format : application/pdf
Size : 3Mo
Format : application/pdf
Size : 662Ko
Format : application/pdf
Size : 805Ko