Sames | A25 F Flowmax® Automatic Airspray Spray Gun

Description

High transfer efficiency
Outstanding finish quality
Modular design & high reliability

Performance

♦ Index knob adjustments of fluid output allows for precise output accuracy
♦ Fan width control delivers a high quality finish & fan pattern optimization
♦ Precise machining of aircap delivers rigid fan control

Productivity

♦ Reduced overspray delivers fast ROI (Return on Investment) & material savings
♦ A 0-90° indexed aircap enables easy & fast re-adjustment of fan pattern
♦ Easy assembly reduces downtime
♦ Side output for easy mounting on automatic systems
♦ Rear output for easy set-up in robotic applications
♦ Circulation only in base in order to reduce pressure loss in the circulating system

Sustainability

♦ Guaranteed needle sealing by bellows and bearings
♦ Hard treated needle & wetted parts in stainless steel or treated stainless steel for increased lifetime
♦ Reduced overspray decreases spray booth maintenance
♦ Brass nickel plated aircap ensures high resistance to water-based materials

Technical data table

Designation	Value	Unit: metric (US)
Maximum Fluid Pressure	6 (87)	bar (psi)
Maximum Fluid Outlet	350 (12.3)	cc/min (oz/min)
Minimum Fluid Outlet	180 (6.3)	cc/min (oz/min)
Maximum Air Pressure	6 (87)	bar (psi)
Recommended Atomization Air Pressure	2.5 (36.2)	bar (psi)
Air Consumption	24 (14.1)	m3/h (cfm)
Trigger Air Pressure	4 (58)	bar (psi)
Maximum Fluid Temperature	50 (122)	°C (°F)
Stainless Steel, PTFE Wetted Parts	♦
Fluid Inlet	2 x F 1/4 NPS, 6-8 hose with fitting supplied
Pilot Air Inlet	F 1/8 NPS, 4-6 hose with fitting supplied
Atomizing Air Inlet	F 1/4 NPS, M 1/4 BSP with fitting supplied
Pilot Air with Quick Fittings	♦
Weight	1.280 (gun and base)	kg (lbs)
Weight	985 (gun only)	g (oz)
ATEX Certification	II2G Ex h IIB T6 Gb X

Equipment

Designation	Nozzle size (mm)	Fluid output (cc/min)	Fan-width at 20 cm (cm)	Part number
A25F 07N3C WITH PROJECTOR AND BASE	0.7	200	10-24	151260809
A25F 09N3C WITH PROJECTOR AND BASE	0.9	250	10-26	151260810
A25F 12N3C WITH PROJECTOR AND BASE	1.2	300	10-34	151260811
A25F 07N3C WITH PROJECTOR WITHOUT BASE	0.7	200	10-24	135420001
A25F 09N3C WITH PROJECTOR WITHOUT BASE	0.9	250	10-26	135420002
A25F 12N3C WITH PROJECTOR WITHOUT BASE	1.2	300	10-34	135420003
A25F BASE SIDE OUTPUTS CIRCULATION IN BASE				129420050

Accessories

Designation	Nozzle size (mm)	Fluid output (cc/mn	Part number
Aircap N3C (BRASS)	0.7 to 1.2	180 to 350	132021750
Aircap N3CA (ALUMINUM)	0.7 to 1.2	180 to 350	132021700
Aircap LP3 (ALUMINUM)	0.7 to 1.2	180 to 350	132060100
Nozzle 207 LP23	0.7	180	134021100
Nozzle 209	0.9	250	134020100
Nozzle 212	1.2	350	134020200
NEEDLE 7-9-12 FOR A25F GUN	0.7 to 1.2	180 to 350	033420100
STAINLESS STEEL EXTENSION DI8 LG400 LATERAL FAN - 12NOZZLE	12		075650311
SST EXTENSION DI20 LENGTH 400 CIRCULAR FAN NOZZLE 8	8		075750111
MOUNTING SUPPORT DIA. 12mm			049351700
COMPLETE ATTACHMENT FOR AUTO. GUN ROD D16 + FIXING NUT			049351000
MOUNTING SUPPORT SWIVELING			049351705
FAN PATTERN CONTROL CONNECTOR - F 1/4 BSPP			029253002
OPTION KIT REGLAGE INDEXE			129251500
Manual fan air adjuster			129253100

Spare Parts

Designation					Part number
A25F AIRSPRAY GUN SEAL KIT					129420901

Technologies

Airspray HPA™

HPA is an Airspray technology offering high power atomization.

Flowmax®

Flowmax® bellow technology is used on gun needle for abrasive material. The bellow is cleaned thanks to a specific cleaning circuit on the gun base plate.

Documents

Select all documents

A25 F Flowmax®

Format : application/pdf
Size : 364Ko

Select the document

Catalog Airspray Range Sames (English version)

Format : application/pdf
Size : 14Mo

Select the document

General Catalog (For North America only) Sames

General Catalog North America

Format : application/pdf
Size : 3Mo

Select the document

Instruction Manuals

Select all documents

A 25 F| User manual

Format : application/pdf
Size : 2Mo

Select the document

Materials

Primer Epoxy

Epoxy primer/sealer is a non-porous finish that is typically recommended as the first base coat over bare steel.

Primer Epoxy Multi-Component

Epoxy primer/sealer multi-component is a non-porous finish base mixed with a hardener that is typically recommended as the first base coat over bare steel.

Primer Polyurethane Multi-Component

Designed to hide profile & surface imperfections, multi-component polyurethane primers & sealers improve adhesion of top coats to the substrate due to the addition of a hardener.

Primer Water-Based

Designed to hide profile & surface imperfections, water-based primers & sealers are environmentally friendly.

Primer Polyurethane

Designed to hide profile & surface imperfections, polyurethane primers & sealers promote adhesion of top coats to the substrate.

Water-Based Stains

Water-Based Wood Stains have all the advantages of oil-based stains. They spread easily, can be repaired, blend effortlessly & have plenty of open time. The thicker formula allows for controlled penetration, which will reduce blotching on softer woods such as Aspen, Pine & Maple.

Solvent-Based Stains

A wood stain consists of a colorant suspended or dissolved in an agent or solvent. Colored, or ''stained", finishes do not penetrate the pores of the wood to any significant degree.

CARC Water-Based

Chemical Agent Resistant Coating (CARC) is available in a water-based solution for environmental protection.

CARC Epoxy Multi-Component

Chemical Agent Resistant Coating (CARC) is a paint commonly applied to military vehicles to provide protection against chemical & biological weapons. The surface of the paint is engineered to be easily decontaminated after exposure to chemical warfare & biological warfare agents. The paint is also resistant to damage & removal by decontaminating solutions.

CARC Polyurethane Multi-Component

Chemical Agent Resistant Coating (CARC) can be two-component polyurethane paint commonly applied to military vehicles to provide protection against chemical & biological weapons.

Moisture-Sensitive Polyurethane Multi-Component

Catalyzed polyurethane clear coats and paints are prized for their durability and versatility around the world. They are used on everything from wood cabinetry, mill work and furniture to planes, trains, and automobiles. They are usually mixed with isocyanates in the hardener. The isocyanate component of polyurethane reacts with moisture in the air and form a hard crystalline structure.

UV Material Epoxy Multi-Component

UV-resistant epoxy systems mixed with hardener cure faster & in moist conditions.

UV Material 100% Solid

UV coatings can be formulated up to 100% solids so that they have no volatile component that contributes to pollution.

UV Material Water-Based

Water-based UV coatings can be considered aesthetically equivalent to bi-component acrylic & polyurethane solvent-based coatings. The range is composed of both pigmented & transparent products.

UV Material Epoxy

UV curable epoxy systems do not require the addition of curing agents. They cure within minutes, or even seconds, and have unlimited working times.

UV Material Polyurethane Multi-Component

The UV polyurethane multi-components are especially designed for very strong UV stability. Mixing with hardener gives very high durability & UV resistance.

UV Material Polyurethane

The UV polyurethanes are especially designed for UV stability, The coating is long lasting, offers excellent substrate protection, provides an attractive finish & is user-friendly.

Top Coat Polyurethane Multi-Component

Polyurethane Top Coat is a two- or three-pack isocyanate-cured polyurethane that gives a durable, high gloss finish. Isocyanates included in the hardener are moisture-sensitive & need a specific process for insulating the circuit.

Top Coat Epoxy

Top Coat Epoxys are used for decorative flooring applications, such as Terrazzo flooring, chip flooring & colored aggregate flooring.

Top Coat Epoxy Multi-Component

Two-part epoxy coatings were developed for heavy duty service on metal substrates & use less energy than heat-cured.

Top Coat Water-Based

Water-based polyurethane is popular because of its low odor & low toxicity. It goes on clear without adding a faint color like oil-based versions do & it dries much faster.

Top Coat Polyurethane

Polyurethane Top Coat gives a durable, high gloss finish.

Acid Catalyst Polyurethane Multi-Component

Multi-Component Epoxy Acid Catalyzing (AC) systems require a hardener or catalyst to dry/cure, which works by starting & maintaining the binder's curing process until the chemical reaction is complete. The solvent evaporates prior to & during the chemical reaction concluding a final film of lacquer, paint or filler. The catalyst is moisture-sensitive and requires a Flowmax® technology protection.

Acid Catalyst Epoxy Multi-Component

Multi-Component Epoxy Acid Catalyzing (AC) systems require a hardener or catalyst to dry/cure, which works by starting & maintaining the binder's curing process until the chemical reaction is complete. The solvent evaporates prior to & during the chemical reaction concluding a final film of lacquer, paint or filler. Curing times of AC products can be dramatically accelerated with heat application.

Metallic Epoxy

The newest metallic epoxy system on the market allows contractors to heighten the effects & make floors look three-dimensional.

Metallic Water-Based

Polyurethane water-based coatings offer a very high chemical/physical resistance & steel effect & are environmentally friendly.

Metallic Epoxy Multi-Component

A two-component 100%-solid epoxy blended with metallic pigments, Metal Fusion is self-leveling, allowing easy application & seamless floor surfaces.

Metallic Polyurethane

Polyurethane coatings are particularly recommended for application to surfaces subject to high levels of wear & tear where excellent chemical/physical resistance is required. The metallic parts will give a steel effect.