Cyclomix® Evo Electronic Mixing & Dosing System - 2 or 3 Components - Airspray, Airmix®, Airless
- Perfect dosing and mixing
- Optimized waste management
- Full Connectivity
The Cyclomix® Evo modular dosing unit can be used with solvent or water-based paint, acid catalyst, PU or epoxy materials. It brings you:
Perfect dosing and mixing: Thanks to its new patented injection method, the Spraymix technology allows a pre-mixing at the injection point. Spraying the catalyst into a vortex of base ensures a perfect mix and a ready-to-apply paint. A unique dosing algorithm ensures accuracy and repeatability of the ratio regardless of the required flow rate and its variations.
High productivity: From a basic version capable of managing 1 base & 1 catalyst, the modularity of the offer allows the Cyclomix® Evo to be customised at the purchase or throughout the life of the Cyclomix® Evo. A large number of functionalities are proposed, such as the management of 2 guns, product regulators or different types and sizes of flowmeters. All these functionalities will undoubtedly meet your needs. A simple and intuitive HMI allows a quick learning phase, even if a new applicator arrives.
Optimized waste management: The "paint optimization" function allows you to use up to 70% of the paint remaining in the hoses at the end of production. A compact construction with passages designed to reduce retention zones and facilitate flushing, thus reducing solvent consumption. An autonomous priming to avoid overconsumption of mixed paint.
Connectivity: The SamesApp application allows you to connect to the Cyclomix® Evo, to control it and also to inform you by notifications when maintenance has to be performed or when alarms occur. All machine data is constantly recorded and can be retrieved with different media (excel file, OPCua, smartphone).
MODULAR OFFER TO MEET ALL YOUR EXPACTATIONS
The modularity will also be pushed to its maximum with the future Cyclomix® Evo configurator. You will be able to build the configuration that perfectly fits your needs.
Thanks to our Cyclomix® Evo configurator, you will have the possibility to select:
You will also be able to select accessories like :
|Unit: metric (US)
|100:1 à 1:2 (1% à 200%)
|115 - 230
|Maximum Fluid Pressure
|Maximum Fluid Output
|50 - 7000
|Maximum Air Pressure
|Number of Products
|2K, 3K &(1K)
|Fluid Viscosity (min-max)
|20 - 3000
|in CA4 seconds (or centipoise cps)
|Number of A Components
|Number of B Components
|Number of C Components
|Smartphone App: Android, IOS
|Communication 4.0: OPCua
|Remote electrical cabinet: touchscreen or control by magnets
|Robot communication protocol: Ethernet, modbus, profinet, CC-lin
|User management: operator/maintenance/distributor/administrator
|Manufacturing order number: 12 digits
|Production and maintenance data: Excel file, OPCua
|Certification: Available in ATEX and non ATEX versions
|Number of supplied circuits: Up to 2
|Number of flushing box for manual spray guns: Up to 2
|Maximum number of receipes
|Cyclomix® Evo - designed to your needs - please contact us to build your own configuration
|Remote control cabinet
|Flushing box (Fpro, Fstart, Xcite®+, Sflow®)
|Frame for control panel
|Frame for 2K product plate
|155661870 + 155661871 (x2)
|Frame for 3K product plate
|155661870 (x2) + 155661871 (x4)
|Air feeding kit
|Glass kit for in-spraybooth piloting
Since 1975, Airmix® combines conventional and high pressure Airless technologies advantages. It is today's industry standard for medium pressure atomization.
Electrostatic spraying brings significant advantages thanks to the wrap around effect.
High efficiency Airless sprayer technology under high pressure for large projects without the added use of compressed air.
Epoxy primer/sealer is a non-porous finish that is typically recommended as the first base coat over bare steel.
Epoxy primer/sealer multi-component is a non-porous finish base mixed with a hardener that is typically recommended as the first base coat over bare steel.
Designed to hide profile & surface imperfections, multi-component polyurethane primers & sealers improve adhesion of top coats to the substrate due to the addition of a hardener.
Designed to hide profile & surface imperfections, polyurethane primers & sealers promote adhesion of top coats to the substrate.
Polyurethane Sealant is abrasion resistant, odorless, remains flexible at low temperatures & is 100% urethane. It's quick & simple to use with its fast-setting capabilities that help to reduce downtime. The balanced, low-viscosity liquid components form an easy-to-use paste.
Accelerator speeds up the setting process for 1K sealant to achieve rapid rain resistance & thorough setting of the accelerated foundation sealant.
Polyurethane Two-Component Sealant can be used in two or three components for increasing mechanical & chemical capabilities.
Some anti-corrosion materials are available in water-based versions. These green paints have a longer dry time, but meet most environmental requirements & have excellent protective qualities.
The Anti-Corrosion Epoxy Multi-Component product is highly resistant to marine & industrial environments, buried conditions, ground water, effluents, salt water & a wide range of oils & chemicals.
Solvent-free epoxy coatings are designed for long-term protection of steel & concrete structures against corrosion, abrasion & chemical attack. Operating temperature ranges from –40F to 1040F.
A two-component efficient coating product, used as first layer on metallic surfaces & in a wide range of painting systems. Forms an excellent quality anti-corrosive polyurethane film, ensuring the adherence between the surface & the next layer of the painting process.
Used for the steel structures of steel pipeline, steel frame, bridge & plant facilities for effective, long-term substrate protection.
Polyurethane coatings are often used for the corrosion protection of steel because they are particularly economical to apply. They dry quickly & can therefore be over-coated in short intervals. They can also be applied independently of the weather conditions & are resistant to impact.
Dye penetrant inspection (DPI), also called liquid penetrant inspection (LPI) or penetrant testing (PT), is a widely applied & low-cost inspection method used to locate surface-breaking defects in all non-porous materials (metals, plastics, or ceramics). The penetrant may be applied to all non-ferrous materials & ferrous materials, although for ferrous components magnetic particle inspection is often used instead for its sub-surface detection capability.
Developer application is widely used in the aerospace market. Powder is applied very finely in a homogeneous layer (substract still visible). In order to obtain such powder layer thickness, pressure pot CSV 230 will enable the best transportation of powder to the gun for required application.
Water-Based Wood Stains have all the advantages of oil-based stains. They spread easily, can be repaired, blend effortlessly & have plenty of open time. The thicker formula allows for controlled penetration, which will reduce blotching on softer woods such as Aspen, Pine & Maple.
A wood stain consists of a colorant suspended or dissolved in an agent or solvent. Colored, or ''stained", finishes do not penetrate the pores of the wood to any significant degree.
Chemical Agent Resistant Coating (CARC) is available in a water-based solution for environmental protection.
Chemical Agent Resistant Coating (CARC) is a paint commonly applied to military vehicles to provide protection against chemical & biological weapons. The surface of the paint is engineered to be easily decontaminated after exposure to chemical warfare & biological warfare agents. The paint is also resistant to damage & removal by decontaminating solutions.
Chemical Agent Resistant Coating (CARC) can be two-component polyurethane paint commonly applied to military vehicles to provide protection against chemical & biological weapons.
Catalyzed polyurethane clear coats and paints are prized for their durability and versatility around the world. They are used on everything from wood cabinetry, mill work and furniture to planes, trains, and automobiles. They are usually mixed with isocyanates in the hardener. The isocyanate component of polyurethane reacts with moisture in the air and form a hard crystalline structure.
UV-resistant epoxy systems mixed with hardener cure faster & in moist conditions.
Water-based UV coatings can be considered aesthetically equivalent to bi-component acrylic & polyurethane solvent-based coatings. The range is composed of both pigmented & transparent products.
UV curable epoxy systems do not require the addition of curing agents. They cure within minutes, or even seconds, and have unlimited working times.
The UV polyurethane multi-components are especially designed for very strong UV stability. Mixing with hardener gives very high durability & UV resistance.
The UV polyurethanes are especially designed for UV stability, The coating is long lasting, offers excellent substrate protection, provides an attractive finish & is user-friendly.
Polyurethane Top Coat is a two- or three-pack isocyanate-cured polyurethane that gives a durable, high gloss finish. Isocyanates included in the hardener are moisture-sensitive & need a specific process for insulating the circuit.
Top Coat Epoxys are used for decorative flooring applications, such as Terrazzo flooring, chip flooring & colored aggregate flooring.
Two-part epoxy coatings were developed for heavy duty service on metal substrates & use less energy than heat-cured.
Water-based polyurethane is popular because of its low odor & low toxicity. It goes on clear without adding a faint color like oil-based versions do & it dries much faster.
Multi-Component Epoxy Acid Catalyzing (AC) systems require a hardener or catalyst to dry/cure, which works by starting & maintaining the binder's curing process until the chemical reaction is complete. The solvent evaporates prior to & during the chemical reaction concluding a final film of lacquer, paint or filler. The catalyst is moisture-sensitive and requires a Flowmax® technology protection.
Multi-Component Epoxy Acid Catalyzing (AC) systems require a hardener or catalyst to dry/cure, which works by starting & maintaining the binder's curing process until the chemical reaction is complete. The solvent evaporates prior to & during the chemical reaction concluding a final film of lacquer, paint or filler. Curing times of AC products can be dramatically accelerated with heat application.
The newest metallic epoxy system on the market allows contractors to heighten the effects & make floors look three-dimensional.
Polyurethane water-based coatings offer a very high chemical/physical resistance & steel effect & are environmentally friendly.
A two-component 100%-solid epoxy blended with metallic pigments, Metal Fusion is self-leveling, allowing easy application & seamless floor surfaces.
Polyurethane coatings are particularly recommended for application to surfaces subject to high levels of wear & tear where excellent chemical/physical resistance is required. The metallic parts will give a steel effect.
Subcontractors of the surface treatment and the coating process for the general industry
Protection, bonding, finishing & sealing for composite & plastic parts