15C25
Airmix® Paint Pump
The 15C25 Airmix® pump is perfect for painting small quantities of fluid products, water or solvent based. Up to (90 bar / 1305 psi) of fluid pressure to compensate pressure drops.
Good chemical compatibility with GT or MB-A cartridges
Large range of ready-to-spray kits
Suction rod or gravity hopper
Description
Technical Data
Equipment
Accessories
Kits
Documents & Media
Technologies
Markets
Performance
♦ Constant delivery and pulse-free for superior finish
♦ Priming at very low air pressure (0.6 bar / 8.7 psi)
Productivity
♦ Large foot valve to handle high viscosity materials up to 5,000 cPs
♦ A closed construction to prevent from risk of injuries & to protect lubricant from external contamination
♦ Quick maintenance thanks to an easy rotatable outlet fitting
♦ Speeds up pump priming and flushing, thanks to a dead-zone-free design that minimizes downtime
♦ Leak monitoring vent hole for fast control
♦ Quiet air motor for very low noise
Sustainability
♦ 45% less parts vs competitors for the air motor to provide a better maintenance
♦ Differential air motor design prevents icing within the paint pump for uninterrupted performance
♦ Ultra-coated plugger for less friction & improved abrasion resistance
♦ Single GT seal minimizes throat packing maintenance, reduces friction, and features a large lubricant wet cup
| Designation | Value |
|---|---|
| Maximum Air Pressure (bar) | 6 |
| Maximum Air Pressure (psi) | 87 |
| Fluid Output at 20 cycles / mn (gal/min) | 0.13 |
| Fluid Output at 20 cycles / mn (l/min) | 0.5 |
| Fluid Output at 60 cycles / mn (gal/min) | 0.4 |
| Fluid Output at 60 cycles / mn (l/min) | 1.5 |
| Free Flow Rate (gal/min) | 0.4 |
| Free Flow Rate (l/min) | 1.5 |
| Number of cycles per liter of products | 40 |
| Pump displacement (cc/cycle) | 25 |
| Pump displacement (in^3/cycle) | 1.52 |
| Depth (in) | 6.7 |
| Depth (mm) | 170 |
| Height (in) | 22.6 |
| Height (mm) | 575 |
| Width/depth (in) | 12.6 |
| Width/depth (mm) | 320 |
| Maximum Material Pressure (bar) | 90 |
| Maximum Material Pressure (psi) | 1305 |
| Pressure ratio | 15/1 |
| Air Consumption (cfm) | 1.65 |
| Air Consumption (m3/h) | 2.8 |
| Weight (kg) | 7.7 |
| Weight (lbs) | 17 |
| Maximum Temperature (°C) | 60 |
| Maximum Temperature (°F) | 140 |
| Power Source | Pneumatic |
| Air Inlet Fitting | F3/8 BSPP |
| Material Inlet Port | F 1/2 BSPP / M26x125 |
| Material Outlet Port | M1/2'' JIC |
| Wetted Parts | Hard chrome stainless steel, Polyethylene, POM C, Stainless steel 303 |
| Certification | CE-UKCA II2G Ex h IIB T3-T4 Gb X |
| Motor Type | Differential |
| Pump Type | Cup pump with balls |
| Pumping technology | Cup piston pumps |
| Sound Level (dbA) | 71.2 |
| Designation | Part number | Material inlet | Air Regulator fluid pressure | Atomization air regulator | Lower seal | Setup | Suction accessory | Throat seal | Pump output Filter |
|---|---|---|---|---|---|---|---|---|---|
| AIRMIX PUMP 15C25 W/M W/O FITLER W/O SUCTION | 151140000 | M26x125 | Yes | Yes | GT | Wall mounted | - | GT | |
| AIRMIX PUMP 15C25 W/M W/O FILTER W/O SUCT ROD INLET F1/2 | 151140320 | F 1/2" BSPP | Yes | Yes | GT | Wall mounted | - | GT | |
| AIRMIX PUMP 15C25 W/M MBA M26x125 WO FILTER WO ROD | 151140400 | M26x125 | Yes | Yes | GT | Wall mounted | - | MBA cartridge | |
| AIRMIX PUMP 15C25 W/M MBA F1/2 WO FILTER WO ROD | 151140450 | F 1/2" BSPP | Yes | Yes | GT | Wall mounted | - | MBA cartridge | |
| 15C25 PUMP WITH SUCTION ROD | 151140100 | M26x125 | Yes | Yes | GT | Wall mounted | Suction rod ID 16 mm | GT | |
| 15C25 PUMP WITH SUCTION ROD AND FILTER | 151140150 | M26x125 | Yes | Yes | GT | Wall mounted | Suction rod ID 16 mm | GT | Yes |
| 15C25 PUMP WITH SUCTION ROD | 151140500 | M26x125 | Yes | Yes | GT | Wall mounted | Suction rod ID 16 mm | MBA cartridge | |
| 15C25 PUMP AIRLESS AIR SUPL W/O PRODUCT FILTER | 151140300 | M26x125 | Yes | GT | Wall mounted | Suction rod ID 16 mm | GT | ||
| 15C25 PUMP WITH SUCTION ROD & FILTER | 151140550 | M26x125 | Yes | Yes | GT | Wall mounted | Suction rod ID 16 mm | MBA cartridge | Yes |
| 15C25 PUMP AIRLESS AIR SUPL W/O PRODUCT FILTER | 151140650 | M26x125 | Yes | GT | Wall mounted | Suction rod ID 16 mm | MBA cartridge |
| Designation | Part number |
|---|---|
| SST Suction rod Ø23 plunging tube length elbowed 570 mm M26x125 | 149596150 |
| SST Suction rod Ø23 plunging tube length 1000mm elbowed (for 200 liters drums) M26x125 | 149596160 |
| Stainless steel drain rod Ø16 elbowed F18 x 125 | 049596000 |
| Tripod | 151140210 |
| Stainless Steel Suction rod Ø16 M26 plunging tube length 570 mm elbowed | 149596050 |
| Fluid filter Mesh 6 3/8 (Inlet F1/2"JIC - Outlet M1/2"JIC) | 155580600 |
| Wall-mounted totem | 151140240 |
| Stainless Steel Suction rod Ø16 M26 plunging tube length 1000mm elbowed (for 200 liters drums) | 149596060 |
| Gravity hopper 6 liters | 151140230 |
| Air plate with 2 air regulators | 151140070 |
| Air plate with 1 air regulator | 151140060 |
| Dismountable trolley | 151241000 |
| Essential Stand | 151730130 |
| Single post cart | 151730140 |
| Designation | Part number | Aircap | Details | Spray gun | Tip | Hoses length (mm) | Setup | Suction accessory | Hoses | Swivel fitting |
|---|---|---|---|---|---|---|---|---|---|---|
| W/M PACK AIRMIX® PUMP 15C25 NO FILT+SUC ROD&XCITE®+120 NO SWI | 151261001 | VX124 | GT cartridge | Xcite®+ 120 | - | 7.5 | Wall mounted | Suction rod ID 16 mm | Yes | |
| W/M PACK AIRMIX® PUMP 15C25 NO FILTER W/O SUCT ROD+Xcite®+120 | 151260976 | VX124 | GT cartridge | Xcite®+ 120 | - | 7.5 | Wall mounted | - | Yes | Yes |
| W/M PACK AIRMIX® PUMP 15C25 NO FILTER&SUCTION ROD&Xcite®+120B | 151260974 | VX124 | GT cartridge | Xcite®+ 120 | - | 7.5 | Wall mounted | Suction rod ID 16 mm | Yes | Yes |
| AIRMIX® PACK W/M 15C25 MBA NO FILT SUC D16 XCITE®+120 SWI H7.5 | 151265005 | VX124 | MBA cartridge | Xcite®+ 120 | - | 7.5 | Wall mounted | Suction rod ID 16 mm | Yes | Yes |
| AIRMIX® PACK W/M 15C25 MBA NO FILT W/O SUC XCITE®+120 SWI H7.5 | 151265006 | VX124 | MBA cartridge | Xcite®+ 120 | - | 7.5 | Wall mounted | - | Yes | Yes |
| AIRMIX® PACK W/M 15C25 MBA NO FILT SUC D16 XCITE®+120 H7.5 | 151265015 | VX124 | MBA cartridge | Xcite®+ 120 | - | 7.5 | Wall mounted | Suction rod ID 16 mm | Yes | |
| Airmix® PACK 15C25 W/M FILTER SUC Xcite®+Light120 09.114 H7.5M | 151140600 | VX124 | MBA cartridge + filter | Xcite®+ Light 120 | 09-114 | 7.5 | Wall mounted | Suction rod ID 16 mm | Yes |
Documents PDF
-
Catalog - Airmix® Spraying and Equipment
-
product-15C25-paint-pump-HD_en_GB.pdf
-
product-15C25-paint-pump-HD_en_US.pdf
-
product-15C25-paint-pump_en_GB.pdf
-
product-15C25-paint-pump_en_US.pdf
Documents Instruction Manuals
-
Pump 15C25 / 30C25 | User manual-B
-
ASSEMBLY-instructions-A
-
ASSEMBLY-instructions-Totem-A
-
Assembly instructions Tripod- A
Documents 3D/2D
-
3D file 15C25
-
3D file 15C25
Linked Products
Airmix® Xcite®+ Light
Airmix® technology
Let's get in touch-
What is Airmix®?
Airmix® is a technology, invented in 1975 by Kremlin, combines the advantages of airless spraying and air-assisted spraying to deliver high-quality paint application with improved transfer efficiency and reduced product consumption.
-
What are the benefits of using Airmix®?
Airmix® technology enables the application of thicker paint layers to better protect surfaces, without compromising on finish quality. Its benefits include superior finish quality, high transfer efficiency, lower paint consumption, and fast, uniform application.
-
For which types of projects is Airmix® recommended?
Airmix® technology is ideal for industrial applications where a balance between protective thickness and finish quality is required, such as furniture manufacturing, the transportation industry, and rolling equipment, among others.