15C50
Airmix® Paint Pump
The 15C50 Airmix® pump is perfect for painting medium quantities of fluid products, water or solvent based. Up to 90 bars of fluid pressure to compensate pressure drops.
Good chemical compatibility with GT or MB-A cartridges
Two-gun management available
Suction rod or gravity hopper
Description
Technical Data
Equipment
Accessories
Kits
Documents & Media
Technologies
Markets
Performance
♦ Quiet and balanced air motor for constant material delivery
♦ Ergonomic design
♦ Pulse-free for a superior finish
♦ Able to prime at very low air pressures (0.6 bar / 8.7 psi) for easy paint loading
♦ Designed to eliminate dead zones for quick color changes
Productivity
♦ Closed construction - zero injury risk
♦ Lubricant protected from external contamination
♦ Easy rotatable outlet fitting to fit every configuration
♦ No tie rods - intermediate hosing for easy assembly
♦ Leak indicator weep hole for fast visual inspection
♦ Simple coupling & quick disassembly
♦ Large foot valve (Ø20, Ø14) to handle high viscosity materials up to 5,000 cPs - carbide seat
Sustainability
♦ Differential air motor for a stall-free system
♦ Quick reversing valve to eliminate pump surge
♦ Ice-free air motor
♦ 50% fewer parts vs competition, less spare parts required
♦ GT cartridge:
-no throat packing maintenance
-low friction
-flat cartridge body design to eliminate dead zones for easy flushing
♦ Ultra chrome-plated piston for reduced friction and high abrasion resistance, extending pump lifespan
♦ Exhaust valve (upper) has large passages and carbide seat
| Designation | Value |
|---|---|
| Maximum Air Pressure (bar) | 6 |
| Maximum Air Pressure (psi) | 87 |
| Fluid Output at 20 cycles / mn (gal/min) | 0.26 |
| Fluid Output at 20 cycles / mn (l/min) | 1 |
| Fluid Output at 60 cycles / mn (gal/min) | 0.79 |
| Fluid Output at 60 cycles / mn (l/min) | 3 |
| Free Flow Rate (gal/min) | 0.78 |
| Free Flow Rate (l/min) | 3 |
| Number of cycles per liter of products | 20 |
| Pump displacement (cc/cycle) | 50 |
| Pump displacement (in^3/cycle) | 3.05 |
| Depth (in) | 6.7 |
| Depth (mm) | 170 |
| Height (in) | 23 |
| Height (mm) | 585 |
| Width/depth (in) | 12.6 |
| Width/depth (mm) | 320 |
| Maximum Material Pressure (bar) | 90 |
| Maximum Material Pressure (psi) | 1305 |
| Pressure ratio | 15/1 |
| Air Consumption (cfm) | 2.09 |
| Air Consumption (m3/h) | 3.55 |
| Weight (kg) | 8 |
| Weight (lbs) | 17.6 |
| Maximum Temperature (°C) | 60 |
| Maximum Temperature (°F) | 140 |
| Power Source | Pneumatic |
| Air Inlet Fitting | F3/8" BSPP |
| Material Inlet Port | F 1/2 " BSP / M26x125 |
| Material Outlet Port | M1/2" JIC |
| Wetted Parts | Hard chrome stainless steel, PEHD, Tungsten carbide, Stainless steel 303 |
| Certification | CE-UKCA II2G Ex h IIB T3 Gb X |
| Motor Type | Differential |
| Pump Type | Cup pump with balls |
| Pumping technology | Cup piston pumps |
| Sound Level (dbA) | 74.9 |
| Designation | Part number | Material inlet | Air Regulator fluid pressure | Atomization air regulator | Setup | Suction accessory | Drain Rod | Pump output Filter | Max pressure (bar) | Spray gun | Fluid Hose | Capacity (L) | Agitator rod length (in) | Hoses length (in) |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Wall mounted 15C50 F 1/2 BSP with Air plate | 151143000 | F1/2" BSPP | Yes | Yes | Wall mounted | - | ||||||||
| Wall mounted 15C50 M26x125 with Air plate | 151143050 | M26x125 | Yes | Yes | Wall mounted | - | ||||||||
| Wall-mounted 15C50 with filter and rods | 151143250 | M26x125 | Yes | Yes | Wall mounted | Suction rod ID 23 mm | Yes | Yes | ||||||
| Wall-mounted 15C50 with filter | 151143450 | M26x125 | Yes | Yes | Wall mounted | - | Yes | Yes | ||||||
| AIRLESS PUMP 15C50 W/M INLET F1/2 W/O SUCT ROD W/O FILTER | 151143500 | F1/2" BSPP | Yes | Wall mounted | - | |||||||||
System, 15C50, W/M, C/W Xcite 120, 55G Rod, Filter, 50Ft.
|
668-143-201 | Wall mounted | 120 | Xcite 120 | 50Ft. | |||||||||
|
System, 15C50, W/M, C/W Xcite 120, 55G Rod, Filter, 25Ft.
|
668-143-200 | Wall mounted | 120 | Xcite 120 | 25Ft. | |||||||||
|
System, 35C50, C/M, C/W Xcite 200, 6L Hopper, Filter, 50Ft.
|
668-148-103 | Trolley | 200 | Xcite 200 | 50Ft. | 6 | ||||||||
|
System, 15C50, C/M, C/W Xcite 120, 6L Hopper, Filter, 25Ft.
|
668-143-102 | Trolley | 120 | Xcite 120 | 25Ft. | 6 | ||||||||
|
System, 15C50, C/M, CW Xcite 120, 5G Rod, Filter, 50Ft.
|
668-143-101 | Trolley | 120 | Xcite 120 | 50Ft. | |||||||||
|
System, 15C50, C/M, C/W Xcite 120, 5G Rod, Filter, 25Ft.
|
668-143-100 | Trolley | 120 | Xcite 120 | 25Ft. | |||||||||
|
System, 15C50, W/M, C/W Xcite 120, 6L Hopper, Filter, 50 Ft.
|
668-143-003 | Wall mounted | 120 | Xcite 120 | 50Ft. | 6 | ||||||||
|
System, 15C50, W/M, C/W Xcite 120, 6L Hopper, Filter, 25Ft.
|
668-143-002 | Wall mounted | 120 | Xcite 120 | 25Ft. | 6 | ||||||||
|
System, 15C50, W/M, C/W Xcite 120, 5G Rod, Filter, 50Ft.
|
668-143-001 | Wall mounted | 120 | Xcite 120 | 50Ft. | 5 | ||||||||
|
System, 15C50, W/M, C/W Xcite 120, 5G Rod, Filter, 25Ft.
|
668-143-000 | Wall mounted | 120 | Xcite 120 | 25Ft. | 5 | 25 |
| Designation | Part number |
|---|---|
| Fluid filter Mesh 6 3/8 (Inlet F1/2"JIC - Outlet M1/2"JIC) | 155580600 |
| Stainless steel drain rod Ø16 elbowed F18 x 125 | 049596000 |
| SST Suction rod Ø23 plunging tube length 1000mm elbowed (for 200 liters drums) M26x125 | 149596160 |
| SST Suction rod Ø23 plunging tube length elbowed 570 mm M26x125 | 149596150 |
| Gravity hopper 6 liters | 151140230 |
| Dismountable trolley | 151241000 |
| Wall-mounted totem | 151140240 |
| PUMP AIR EQUIPMENT + AIR 2 GUN MANAGEMENT WO PRODUCT | 151140095 |
| PUMP AIR EQUIPMENT + AIR&PRODUCT 2 GUN MAMANGEMENT MANIFOLD | 151140090 |
| Designation | Part number | Aircap | Details | Spray gun | Tip | Hoses length (mm) | Pump type | Suction accessory | Swivel fitting | Hoses | Two gun manifold |
|---|---|---|---|---|---|---|---|---|---|---|---|
| Airmix® PACK 15C50 W/M FILTER SUC Xcite®+Light120 12.114 H7.5M | 151143600 | VX124 | GT cartridge + Filter | Xcite®+ Light 120 | 12-114 | 7.5 | Wall mounted | Suction rod ID 23 mm | Yes | Yes | |
| KIT 15C50 WALL/M PMP & ROD & XCITE®+120 & TWIST SWIVEL | 151265050 | VX124 | GT cartridge | Xcite®+ 120 | - | 7.5 | Wall mounted | Suction rod ID 23 mm | Yes | Yes | |
| KIT 15C50 WALL/M WO ROD & FILTER & XCITE®+120 & TWIST SWIVEL | 151265052 | VX124 | GT cartridge + Filter | Xcite®+ 120 | - | 7.5 | Wall mounted | - | Yes | Yes | |
| KIT 15C50 WALL/M +ROD & FILTER & XCITE®+120 & TWIST SWIVEL | 151265053 | VX124 | GT cartridge + Filter | Xcite®+ 120 | - | 7.5 | Wall mounted | Suction rod ID 23 mm | Yes | Yes | |
| PACK 15C50 2G W/M MBA SUC D25+FIL 2/XCITE®+120+2/09114+2/H7.5 | 151143650 | VX124 | MBA cartridge + Filter | 2x Xcite®+ 120 | 09-114 | 7.5 | Wall mounted | Suction rod ID 23 mm | Yes | Yes | Yes |
Documents PDF
-
Catalog - Airmix® Spraying and Equipment
-
product-15-c50-airmix-paint-pump_en_GB.pdf
-
product-15-c50-airmix-paint-pump_en_US.pdf
Documents Instruction Manuals
-
15C50 | User manual
Documents 3D/2D
-
3D file 15C50
-
3D file 15C50
Linked Products
Airmix® Xcite®+ Light
Airmix® technology
Let's get in touch-
What is Airmix®?
Airmix® is a technology, invented in 1975 by Kremlin, combines the advantages of airless spraying and air-assisted spraying to deliver high-quality paint application with improved transfer efficiency and reduced product consumption.
-
What are the benefits of using Airmix®?
Airmix® technology enables the application of thicker paint layers to better protect surfaces, without compromising on finish quality. Its benefits include superior finish quality, high transfer efficiency, lower paint consumption, and fast, uniform application.
-
For which types of projects is Airmix® recommended?
Airmix® technology is ideal for industrial applications where a balance between protective thickness and finish quality is required, such as furniture manufacturing, the transportation industry, and rolling equipment, among others.