20C50
Airmix® Paint Pump
The 20C50 Airmix® pump is a medium-range, all purpose pump for medium viscosity products. Special model 20C50GT for water based and high solid content.
Suction rod or gravity hopper
Heavy duty air changeover valves
Good chemical compatibility with GT, Chevron, PE seals
Description
Technical Data
Equipment
Accessories
Kits
Documents & Media
Technologies
Markets
Performance
♦ Economical with low air consumption
♦ Quiet air motor to preserve work environment
Productivity
♦ Construction without dead zones for quick flushing & product changes
♦ The mobile seal located on the piston ensures the mechanical cleaning of the fluid section internal wall during pump runs
♦ Lower mobile single lip packing (GT) reducing friction for improved efficiency
Sustainability
♦ Fewer parts & simple design for extended lifetime
♦ Poly fluid and PTFE graphite seal for improved wear resistance
♦ Triple chrome layer piston for exceptional durability
| Designation | Value |
|---|---|
| Maximum Air Pressure (bar) | 6 |
| Maximum Air Pressure (psi) | 87 |
| Fluid Output at 20 cycles / mn (gal/min) | 0.26 |
| Fluid Output at 20 cycles / mn (l/min) | 1 |
| Fluid Output at 60 cycles / mn (gal/min) | 0.79 |
| Fluid Output at 60 cycles / mn (l/min) | 3 |
| Free Flow Rate (gal/min) | 0.79 |
| Free Flow Rate (l/min) | 3 |
| Number of cycles per liter of products | 20 |
| Pump displacement (cc/cycle) | 50 |
| Pump displacement (in^3/cycle) | 3.05 |
| Depth (in) | 7 |
| Depth (mm) | 178 |
| Height (in) | 33 |
| Height (mm) | 838 |
| Width/depth (in) | 14 |
| Width/depth (mm) | 356 |
| Maximum Material Pressure (bar) | 120 |
| Maximum Material Pressure (psi) | 1740 |
| Pressure ratio | 20/1 |
| Air Consumption (cfm) | 6.4 |
| Air Consumption (m3/h) | 10.8 |
| Weight (kg) | 17 |
| Weight (lbs) | 37.5 |
| Maximum Temperature (°C) | 60 |
| Maximum Temperature (°F) | 140 |
| Power Source | Pneumatic |
| Air Inlet Fitting | F3/8" BSP |
| Material Inlet Port | F 1/2" BSP / M26x125 |
| Material Outlet Port | M1/2" JIC |
| Wetted Parts | Hard chrome stainless steel, Stainless steel 303, PTFE, Polyethylene |
| Certification | CE II 2G h T2 |
| Motor Type | Mechanical reversing block |
| Pump Type | Cup pump with balls |
| Pumping technology | Cup piston pumps |
| Sound Level (dbA) | 78 |
| Designation | Part number | Material inlet | Seal | Lower seal | Setup | Suction accessory | Air Regulator fluid pressure | Atomization air regulator | Drain Rod | Pump output Filter |
|---|---|---|---|---|---|---|---|---|---|---|
| 20C50 BARE PUMP | 151770000 | F1/2" BSPP | Chevron mix Polyfluid/PTFEG | GT | Bare | - | ||||
| 20C50 PUMP W/M WITH FILTER AND RODS | 151770100 | M26x125 | Chevron mix Polyfluid/PTFEG | GT | Wall mounted | Suction rod ID 23 mm | Yes | Yes | Yes | Yes |
| 20C50 PUMP W/M W/O FILTER WITH SUCTION ROD | 151770200 | M26x125 | Chevron mix Polyfluid/PTFEG | GT | Wall mounted | Suction rod ID 23 mm | Yes | Yes | ||
| 20C50 PUMP GT SEAL W/M WITH FILTER AND RODS | 151773100 | M26x125 | GT | GT | Wall mounted | Suction rod ID 23 mm | Yes | Yes | Yes | Yes |
| Designation | Part number |
|---|---|
| Wall mounted support for bare pump | 044910121 |
| Single post cart | 151730140 |
| Two Post Cart w/o plate | 051221000 |
| Pump Mounting Plate with straps | 056100199 |
| Gravity hopper 6 liters | 151140230 |
| SST Suction rod Ø23 plunging tube length elbowed 570 mm M26x125 | 149596150 |
| SST Suction rod Ø23 plunging tube length 1000mm elbowed (for 200 liters drums) M26x125 | 149596160 |
| Stainless steel drain rod Ø16 elbowed F18 x 125 | 049596000 |
| Fluid filter 3/8 Mesh 6 | 155580300 |
| SST SLEEVE L70MM - MM 3/8" NPT | 055580301 |
| Designation | Part number | Aircap | Details | Spray gun | Tip | Hoses length (mm) | Pump type | Suction accessory | Swivel fitting | Hoses |
|---|---|---|---|---|---|---|---|---|---|---|
| KIT 20C50 WALL-MOUNTED & Xcite®+ 120B & HOSE 7.5M | 151260966 | VX124 | Chevron + filter | Xcite®+ 120 | - | 7.5 | Wall mounted | Suction rod ID 23 mm | Yes | Yes |
| PACK 20C50 GT W/M & Xcite®+120B & ROD & HOSE 7.5M | 151260973 | VX124 | GT + filter | Xcite®+ 120 | - | 7.5 | Wall mounted | Suction rod ID 23 mm | Yes | Yes |
Documents PDF
-
Catalog - Airmix® Spraying and Equipment
-
product-20c50-airmix-paint-pump_en_GB.pdf
-
product-20c50-airmix-paint-pump_en_US.pdf
Documents 3D/2D
-
3D file 20C50
-
3D file 20C50
Linked Products
Airmix® Xcite®+ Light
Airmix® technology
Let's get in touch-
What is Airmix®?
Airmix® is a technology, invented in 1975 by Kremlin, combines the advantages of airless spraying and air-assisted spraying to deliver high-quality paint application with improved transfer efficiency and reduced product consumption.
-
What are the benefits of using Airmix®?
Airmix® technology enables the application of thicker paint layers to better protect surfaces, without compromising on finish quality. Its benefits include superior finish quality, high transfer efficiency, lower paint consumption, and fast, uniform application.
-
For which types of projects is Airmix® recommended?
Airmix® technology is ideal for industrial applications where a balance between protective thickness and finish quality is required, such as furniture manufacturing, the transportation industry, and rolling equipment, among others.