33F440
Flowmax® Paint Circulating System Pump
The 33F440 pump is designed to pump large quantities of medium viscosity products. Up to 200 bar of fluid pressure allows Airmix® or Airless Fine Finish applications.
Used for circulation and/or multiple guns.
The biggest and most powerful pump of its category.
Fluid output fitting 3/4"JIC for high flow-rate installations
Description
Technical Data
Equipment
Accessories
Documents & Media
Technologies
Markets
Performance
♦ High output to feed several guns in circulation
♦ High suction power for viscous materials
Productivity
♦ No lubricant cup due to FLOWMAX® Bellows technology - total sealing & dust free
♦ Ideal for moisture-sensitive catalyst
Sustainability
♦ Triple chrome piston & cylinder, stainless steel ball & carbide seat for a long-term use
♦ Sleek design with few parts. The inversion system provides a fast changeover for a constant material delivery
♦ Bellows lifetime 10,000,000 cycles - up to 8 years
| Designation | Value |
|---|---|
| Maximum Air Pressure (bar) | 6 |
| Maximum Air Pressure (psi) | 87 |
| Fluid Output at 20 cycles / mn (gal/min) | 2.3 |
| Fluid Output at 20 cycles / mn (l/min) | 8.8 |
| Fluid Output at 60 cycles / mn (gal/min) | 7 |
| Fluid Output at 60 cycles / mn (l/min) | 26.4 |
| Free Flow Rate (gal/min) | 7 |
| Free Flow Rate (l/min) | 26.4 |
| Number of cycles per liter of products | 2 |
| Pump displacement (cc/cycle) | 440 |
| Pump displacement (in^3/cycle) | 26.8 |
| Depth (in) | 12.9 |
| Depth (mm) | 32.8 |
| Height (in) | 46.8 |
| Height (mm) | 118.8 |
| Width/depth (in) | 20.7 |
| Width/depth (mm) | 52.6 |
| Maximum Material Pressure (bar) | 198 |
| Maximum Material Pressure (psi) | 2871 |
| Pressure ratio | 33/1 |
| Air Consumption (m3/h) | 104.5 |
| Air Consumption at 15 cycles / mn at 4 bar (60 psi) (cfm) | 46 |
| Air Consumption at 15 cycles / mn at 4 bar (60 psi) (m3/h) | 78.4 |
| Weight (kg) | 121 |
| Weight (lbs) | 265 |
| Maximum Temperature (°C) | 50 |
| Maximum Temperature (°F) | 122 |
| Power Source | Pneumatic |
| Air Inlet Fitting | F 3/4 BSP |
| Material Inlet Port | F 1 NPS |
| Material Outlet Port | F 3/4" JIC |
| Wetted Parts | Hard chrome stainless steel, Polyethylene, Stainless steel 303, Tungsten carbide |
| Motor Type | Switch type |
| Pump Type | Flowmax |
| Pumping technology | Flowmax |
| Designation | Part number | Seal | Lower seal | Setup | Suction accessory | Drum size (L) | Air Regulator | Drain Rod | Pump output Filter |
|---|---|---|---|---|---|---|---|---|---|
| PUMP 33F440 BARE GTE-CO SEALS W/O FILTER W/O SUCTION W/O AIR | 151860800 | GTE-Co abrasive | Cup seal (UHMWPE) | Bare | - | ||||
| PUMP 33F440 BARE PU SEALS W/O FILTER W/O SUCTION W/O AIR | 151860801 | PU | PU | Bare | - | ||||
| PUMP 33F440 BARE GT MSE SEALS W/O FILTER W/O SUCTION W/O AIR | 151860802 | GT polyvalent | Cup seal (UHMWPE) | Bare | - | ||||
| PUMP 33F440 GTE-CO W/M AIR REG FILTER SUCTION ROD 200L+DRAIN | 151860850 | GTE-Co abrasive | Cup seal (UHMWPE) | Wall mounted | Suction rod ID 23 mm | 200L | Yes | Yes | Yes |
| PUMP 33F440 PU W/M AIR REG FILTER SUCTION ROD 200L+DRAIN | 151860851 | PU | PU | Wall mounted | Suction rod ID 23 mm | 200L | Yes | Yes | Yes |
| PUMP 33F440 GT MSE W/M AIR REG FILTER SUCTION ROD 200L+DRAIN | 151860852 | GT polyvalent | Cup seal (UHMWPE) | Wall mounted | Suction rod ID 23 mm | 200 | Yes | Yes | Yes |
| PUMP 33F440 GTE-CO W/M AIR REG W/O FILTER W/O SUCTION ROD | 151860853 | GTE-Co abrasive | Cup seal (UHMWPE) | Wall mounted | - | Yes | |||
| PUMP 33F440 PU W/M AIR REG W/O FILTER W/O SUCTION ROD | 151860854 | PU | PU | Wall mounted | - | Yes | |||
| PUMP 33F440 GT MSE W/M AIR REG W/O FILTER W/O SUCTION ROD | 151860855 | GT polyvalent | Cup seal (UHMWPE) | Wall mounted | - | Yes |
| Designation | Part number |
|---|---|
| Suction rod Ø25 plunging tube length 570 mm | 049597100 |
| Stainless steel drain rod Ø16 elbowed F18 x 125 | 049596000 |
| Fluid filter 3/4 mesh 12 | 155581400 |
| PUMP SUPPORT | 151590510 |
| HEAVY DUTY TROLLEY | 151590650 |
| AIR REGULATOR EQUIPEMENT FOR PUMPS | 151590105 |
| SST Suction rod Ø23 plunging tube length 1000mm elbowed (for 200 liters drums) M26x125 | 149596160 |
Documents PDF
-
product-pcs-33f440-flowmax-paint-circulating-system-pump_en_GB.pdf
-
product-pcs-33f440-flowmax-paint-circulating-system-pump_en_US.pdf
-
product-pcs-33f440-flowmax-paint-circulating-system-pump-HD_en_GB.pdf
-
product-pcs-33f440-flowmax-paint-circulating-system-pump-HD_en_US.pdf
Documents Instruction Manuals
-
FLUID-SECTION-F440-SAMES-KREMLIN-Instruction-Manual-DRT582395110-US-A.pdf
-
MOTOR-9000-100-SAMES-KREMLIN-Instruction-Manual-DRT582393110-US-A.pdf
-
MUFFLER-SAMES-KREMLIN-Instruction-Manual-DRT582444110-GB-A.pdf
-
PUMP-33F440-SAMES-KREMLIN-Instruction-Manual-DRT582392110-US-A.pdf
Documents 3D/2D
-
3D step file - 33F440
Powder
Let's get in touch-
Why use powder coating?
Contact us to see if powder coating is the right fit for your project.Powder coating is eco-friendly, durable, and delivers a high-quality, solvent-free finish.