Quick Disconnect

Bell spraying technoloy

Bell spraying technoloy

Any maintenance operator would concede - the shorter the production downtime, the better. Instead of spending time & energy on risky operations & online repairs, the operator can correct a faulty system within minutes to fully restore the production line & resume operations.

With its quick & easy maintenance design, the Quick Disconnect interface is constructed of special fittings, o-rings & connections to deter against leaks & imprecise assembly.

MAINTAINABILITY

The Quick Disconnect (QD) allows for quickly replacing the faulty equipment with a single wrench for loosening & tightening. This reduces the mean time to repair (MTTR) to a minimum & further offers the highest availability for production lines. Our exclusive RBC automatic detection will validate the correct installation of the new atomizer ensuring your production line is restored as quickly as possible.

SUSTAINABILITY

The exceptional design of the Sames Quick Disconnect outlasts current robotic standards with its extended life & ability to perform under extreme conditions. Seal damage & leakages are prevented by an added tightening feature while the mean time before failure (MTBF) is dramatically increased.

SAFETY lock

The Quick Disconnect has been designed to fit in one position only in order to prevent connectivity issues. The product (paint & solvent in beige color fittings) and air lines (blue color fittings) have also been completely separated on the QD to avoid mixing during disassembly further validating the QD's safe & simple operation.

Products

Informations associées
- Products

Products

Accubell 709 EVO

Accubell® 709 Evo

Accubell® 709 Evo is a robotic internal charge electrostatic rotary bell atomizer dedicated to water-based paint with a docking station fixed to the booth wall.

PPH707-SB

The PPH707 SB is a robotic sprayer designed for electrostatic applications with internal charge of solvent-based paint offering a wide range of bells to fit any application!

Nanobell 801

Nanobell 801 Automatic

Our first non-electrostatic rotary bell atomizer has been designed to meet the need of high finishing applications allowing paint savings at a reduced investment. Nanobell 801 combines Airspray and Rotary Bell technologies to offer all the benefits of rotary bell atomization to non-electro applications at an enhanced production speed with easier set-up and operation.

PPH707-SB

PPH707 SB 2K is a sprayer dedicated to the electrostatic application with internal charge of 2 component liquid paints. It is equipped with the static mixer located just before the bellcup injector which helps to reduce the mixed paint volume to only 2cc (0.07 oz).

PPH707-SB

PPH707 Airspray & PPH707 Airspray 2K

PPH707 Airspray is dedicated to the application of waterborne materials without electrostatic effect.

PPH707 EXT

PPH707 EXT external charge sprayer is designed for the application of waterbased materials.

PPH 707 EXT MT

PPH707 EXT external charge sprayer is dedicated to the application of waterborne materials. This version of the PPH707 EXT features Multi-Trigger technology, which integrates a color change block in the body of the atomizer. This color change block allows for 1 super-high runner and 5 high runners, saving paint on color changes.

PPH707 EXT-ST

PPH707 EXT-ST is designed to apply water-based paints. The electrostatic charge is indirect also called External Charge. The particles get electrically charged by passing close to electrodes outside to the sprayer. Equipped with Hi-TE spraying technology, the performance, transfer efficiency and quality of finishing is a reference for external charge applicators.

PPH707-SB

PPH707 ICWB & PPH707 ICWB 2K

PPH707 ICWB is a sprayer dedicated to an electrostatic application with internal charge water-based paints. It requires an additional insulated supply system, which might be in process arm or on the floor.

PPH 707 ICWB-M

The PPH707 ICWB-M atomizer is a high performance atomizer with rotating bell cup, designed for applying water-based paints, using internal charge.

MSGun

PPH707 MS-GUN, with manual tool change is mainly dedicated to Tier 1 paint lines. This allows switching quickly from a gun to a bell process and vice versa for solvent based paint application.

MSGun

PPH707 MS-GUN 2K

Robotic multi-process atomizer for 2K solvent-based material.

PPH707-MT-KREMLINREXSONSames_1

PPH707 MT is a sprayer designed for electrostatic applications with internal charge of liquid paints. This atomizer is the best solution for colored primer or clear coat: low paint loss and fast color change. It is equipped with a color change block inside the atomizer for 1 super high runner and 5 high runner colors.

PPH707-MT-KREMLINREXSONSames_1

PPH707 MT 2K 1H

PPH707 MT 2K 1H (one hardener) is a sprayer designed for electrostatic application with internal charge of 2 component liquid paints. This atomizer is the best solution for colored 2K primer or clear coat: low paint loss and fast color change. It is equipped with: a static mixer located just before the bellcup injector a color change block inside the atomizer for 1 super high runner and 5 high runner colors

PPH 707 MT 2K 3H

PPH707 MT 2K 3H

PPH707 MT 2K 3H (three hardeners) is a sprayer designed for electrostatic application with internal charge of 2 components liquid paints. This atomizer is the best solution for colored 2K primer or clear coat: low paintlost and fast color change. It is equipped with: a static mixer located just before the bellcup injector a color change block inside the atomizer for 1 super high runner and 5 high runner colors