Sames | REXSON 2B0588 2 Ball Pump

Description

Robust and reliable
Simple to maintain
Configurable and versatile

Performance

M1 Power distributor: Wide passageway for maximum airflow
L1 Upper Body: The upper part of the pump is of robust construction and must be able to withstand the maximum pressures.
L2 Upper Valve: This valve allows material to pass from the lower chamber to the upper chamber of the pump. It is designed to limit pressure loss.
L3 Lower Valve: This valve is essential for the suction of the product. It is designed to be as wide as possible for easy filling.

Productivity

M2 The Cover: Very easy to remove and to access the repair parts
M3 The Pulse Output: The motor can be easily monitored thanks to an air pulse occurring at each reversal.
L4 Motor adaptation flange: Unique and robust assembly of the motor shaft connection to the pump shaft. Allows quick adaptation to different air motors to vary the pressure ratio of the pump.
L5 Guard: To guarantee the safety of the operators, this guard prevents contact with the moving shaft of the pump.
L6 Lower Body: The pump lower is adapted as needed to be fixed on a follower plate, immersed in a bung drum, or simply threaded for connection to a manifold.

Sustainability

M4 Brass guiding ring: Enduring and accurate guidance system
M5 Camshaft inversion system: Very reliable reversal system
L7 Upper seals packing: Our pump range has a wide range of seal materials to suit all your needs.
L8 Rod and Cylinder: The piston shaft and the cylinder are made of triple chrome steel to ensure excellent abrasion resistance.

The REXSON pumps of the high viscosity range have been designed with robustness in mind, and the aim of offering a high degree of modularity to follow your application. Unlike liquid fluid pumping, the high viscosity range imposes highly variable mechanical stresses from one product to another.

Double-acting ball pumps are similar in construction to pumps for liquid products and are capable of transferring fluid up to 50,000 Cps. These pumps have been adapted for high viscosity products by optimizing the passage diameters, the nature of the seals, and the hardness of the materials.

To create your own pump that will meet your application specifications, you will have to select:

The correct air motor according to the maximum pressure,
The construction materials according to the nature of the product,
The foot and mounting style according to the product packaging, and your installation
The Seal pack (see the Documents tab to get all necessary information on our website).

Our air motors are designed for maximum airflow with a pilot distributor to allow fast inversion. They are equipped with a broad silencer to avoid water freezing at the motor outlet and can be controlled (start / stop) from a remote air control.

These pumps are used as feeding equipment directly from the product packaging in-wall mounting or installed on an elevator with a follower plate for open drums.

High Viscosity 2 Ball Pump used for Airless® and extrusion applications. The pumping solution offers a small to mid-size footprint and its stainless-steel construction with optional carbide seat and different seal pack options work for all materials, including abrasive.

You can customize your pump with the right air motor size and create your own part number. We suggest you contact our experts to help you select the right configuration to fit your needs. You can also consult our Documents tab, our Configurator, and the complete catalog.

Technical data table

Designation	Value	Unit: metric (US)
Maximum Fluid Pressure	180 (2,600)	bar (psi)
Maximum Air Pressure	6 (87)	bar (psi)
Viscosity	<50,000	cps
Pressure Ratio (depending on air motor size)	10:1, 18:1, 30:1
Maximum Temperature	80 (176)	°C (°F)
Fluid Volume per Cycle	588	cc
Fluid Output at 15 cycles / mn	8,82 (2.33)	l/mn (gal/mn)
Fluid Output at 60 cycles / mn	35.,28 (9.32)	l/mn (gal/mn)
Motor Type	6000, 7000, 9000
Air Inlet	3/4"BSP(F)
Fluid Outlet	1-1/2"BSPT(F)
Weight (fluid section only)	36 (79.4)	kg (lbs)
Weight (air motor only)	21-35 (46.3-77.2)	kg (lbs)
Fluid Inlet (follower plate)	105mm
Fluid Inlet (wall-mounted)	1-1/2"BSP(F)
Air Consumption upon air motor size (see catalog)	♦
Stroke	120 (4.72)	mm (inch)

Equipment

REX2B0588-MO-MA-FO-SE	Motor (MO)	Material (MA)	Foot (FO)	Sealing (SE)	Model
● Motor choices (Pressure ratio)					MO=?
- Motor 6000 (10:1)	60				MO=60
- Motor 7000 (18:1)	70				MO=70
- Motor 9000 (30:1)	90				MO=90
● Lower Material selection					MA=?
- Mixed Materials		CS			MA=CS
- Stainless Steel		SS			MA=SS
- Mixed Materials and carbide valves		SC			MA=SC
● Foot selection					FO=?
- Wall mounted (Inlet F 1-1/2'' BSPP)			WM		FO=WM
- Follower plate (Ø=105mm)			FP		FO=FP
● Seal package selection					SE=?
- PTFE - Polytetrafluorothylene (Teflon like properties)				01	SE=01
- PTFE + FEP (Encapsulated O-Ring: Teflon like properties over Viton or Silicone)				02	SE=02
- PE - Polyethene (UHMWPE)				03	SE=03
- Leather				04	SE=04
- PTFEG (PTFE + Graphite compound)				05	SE=05
- PU (Polyurethane)				06	SE=06
- PTFEV (PTFE + Glass compound)				07	SE=07

Accessories

Description				Part number
Flat Seal Follower Plate for 200L Drums -Ø 571 (pump foot Ø105)				151519001
Double O-Ring Follower Plate for 200L drum -Ø 571 (pump foot Ø105)				1055170001
Double O-Ring PTFE-Coated Follower Plate for 200L drum -Ø 571 (pump foot Ø105)				1057370001
Wall mounted support for motor 5000 to 9200				9015
Double column elevator for 200 L. drums (not available in NA/China)				151090500
1000 L. and 300 G. Follower plates (please contact us)				♦

Technologies

2 Ball

2 ball pumping technology is highly used in fluid sections with one ball / seat for suction & the other ball / seat for feeding.

Chevron Sealing

CHEVRON packing set independently reacts to pressure and automatically effects a seal

Switch Motor

The switch motor technology concerns the air motor of the pumps. The reverse process is made with switch for avoiding as much as possible the pulse effect.

Cup Lub

A pump has a cup filled with lubricant at the top of the liquid section.

Triple Chrome Layer

This is a special treatment for very high sustainability & is applied to the piston of the fluid section of a pump.

Documents

Select all documents

REXSON 2B0588

Format : application/pdf
Size : 532Ko

Select the document

REXSON 2B0588 Datasheet

Format : application/pdf
Size : 204Ko

Select the document

REXSON 6000 Air Motor Datasheet

Format : application/pdf
Size : 232Ko

Select the document

REXSON 7000 Air Motor Datasheet

Format : application/pdf
Size : 229Ko

Select the document

REXSON 9000 Air Motor Datasheet

Format : application/pdf
Size : 225Ko

Select the document

REXSON Pumps Configurator

Format : application/vnd.openxmlformats-officedocument.spreadsheetml.sheet
Size : 458Ko

Select the document

Instruction Manuals

Select all documents

Motor 6000 REXSON Dispense | User manual

Format : application/pdf
Size : 3Mo

Select the document

Motor 7000 REXSON Dispense | User manual

Format : application/pdf
Size : 3Mo

Select the document

Motor 9000 REXSON Dispense | User manual

Format : application/pdf
Size : 3Mo

Select the document

REX2B0588 REXSON Dispense | User Manual

Format : application/pdf
Size : 1Mo

Select the document

REXSON Pumps / General Safety Instructions

Format : application/pdf
Size : 465Ko

Select the document

Materials

Grease Graphite

Solid lubricating additives, including graphite, are added to some grease to improve its lubricating properties.

Grease Silicone

Silicone grease is commonly used for lubricating & preserving rubber parts, such as O-rings. Additionally silicone grease does not swell or soften the rubber, which can be a problem with hydrocarbon-based grease. It functions well as a corrosion-inhibitor & lubricant for purposes that require a thicker lubricant. Thermal grease often consists of a silicone grease base along with added thermally conductive fillers. It is used for heat transfer abilities rather than friction reduction.

Silicone Two-Component Sealant

Silicone sealants can be used in two or three components for increasing mechanical capabilities.

Silicone Sealant

Silicone sealants are used to protect & seal anything from the smallest silicon chip to the world's tallest skyscrapers.

Polyurethane Sealant

Polyurethane Sealant is abrasion resistant, odorless, remains flexible at low temperatures & is 100% urethane. It's quick & simple to use with its fast-setting capabilities that help to reduce downtime. The balanced, low-viscosity liquid components form an easy-to-use paste.

Polyurethane Sealant with Accelerator

Accelerator speeds up the setting process for 1K sealant to achieve rapid rain resistance & thorough setting of the accelerated foundation sealant.

Polyurethane Two-Component Sealant

Polyurethane Two-Component Sealant can be used in two or three components for increasing mechanical & chemical capabilities.

MS Polymer Sealant

Silyl modified polymers (SMP, also silane-modified polymers, silane-terminated polymers) are polymers (large, chained molecules) terminating with a silyl (SiH3) group. SMPs are the main components in solvent-free & isocyanate-free sealant and adhesive products. Typically the sealant products manufactured with silyl modified polymers have good adhesion on a wide range of substrate materials, and have good temperature & UV resistance.

Hybrid Sealant with Accelerator

Polyvinyl Chloride (PVC)

Used for waterproofing, anti-ship for Under Body Coating (UBC),under body sealing (UBS) or Interior sealing.

Hybrid Sealant

Today polyurethane & silicone sealants are considered "high performance products." They deliver a significant adhesion, a good movement capability & are durable. However, these high performance products do have their limitations & disadvantages.

Adhesive STP

STP Polymers are the new generation environmentally friendly polymers that are replacing the isocyanate & solvent containing polyurethane resins to produce sealant & adhesive products that are safer & greener for the consumer & tradesman.

Adhesive Polyurethane

Polyurethane (PU or PUR for short) is not a single material with a fixed composition, but instead a range of chemicals sharing similar chemistry. It is a polymer composed of organic chain units joined by urethane or carbamate links. Most polyurethanes are thermosetting polymers & do not melt when heated unlike thermoplastic polyurethanes which do.

Adhesive Hybrid

Hybrid Adhesive Sealants are one component formulations that form robust, permanent & flexible bonds offering great adhesion to many materials for reliable performance, are paintable when wet for fast process time, have a fast skin time for a tack-free surface, are isocyanate-free for reduced health & safety concerns & resist degradation from sunlight for excellent aesthetics.

Adhesive 1K Accelerator

Additional accelerator used for polyurethane or silicone adhesives speed up the chemical reaction between the adhesive & the material they are bonding. Used often in the field where temperatures are lower to accelerate the bonding times.

Adhesive Polyurethane Multi-Component

Two-component polyurethanes (also called 2C PUR) have the advantages of single component polyurethane adhesives, but cure more quickly through larger gaps & are not dependent on moisture/heat for curing.

Adhesive Acrylic

Adhesive acrylics were developed for structural bonding applications that require tensile, shear & peel strength combined with maximum impacts, stress & shock resistance.

Adhesive Silicone

In general, users can count on silicone adhesives to produce bonds that can withstand high temperatures (in some cases up to 600°F), remain flexible even after curing & resist chemicals including water.

Adhesive Butyl

This adhesive is highly resistant & aggressive sticking to almost any substrate despite its easy fit application properties.

Adhesive Silicone Multi-Component

Two-component silicone has the advantages of single component silicone adhesives, but cure more quickly through larger gaps & are not dependent on heat for curing.

Adhesive Epoxy

Epoxy adhesives, dependent upon the specific chemistry of the system & nature of the cross-linking available, adhere to a wide variety of materials. Some of the most important performance requirements include exceptional chemical & heat resistance, excellent adhesion & water resistance, as well as satisfactory mechanical & electrical insulating properties.

Adhesive MS Polymer

MS Polymers are the next generation of silicones & mastics. Unlike their counterparts these products adhere well to most substrates without the use for specific primers. By using these products you can reduce the risk of application mistakes.

Adhesive Epoxy Multi-Component

Two-component epoxies feature unique versatility in application & performance. These systems consist of a resin & a hardener that can be formulated to offer a wide range of mechanical, thermal, optical & electrical properties.

Markets