Sames | REXSON S1 Extrusion Pump

Description

Double acting and balanced design
Metal to metal check plate and seat design
Heavy duty construction
High temperature capability

► For configurations and part numbers, please refer to the Documents tab.

Performance

♦Simple design with minimal parts
♦Only 4 moving parts
♦Balanced volumes at top and bottom provides equal pump force

Productivity

♦Quiet operation
♦Air motor shaft reduces side loading extending pump life
♦High temperature capability 392°F (200°C)

Sustainability

♦Uses reversible metal-to-metal check plate and seat design
♦Balanced double-acting operation

Technical data table

Designation	Value	Unit: metric (US)
Outlet Port Size	1 1/4	NPT (")
Displacement Per Cycle	197 (12)	cc (cubic inch)
Material Pressure Operating Range	427 (6200)	Bar (psi)
Maximum Viscosity	15,000,000	cps

Technologies

Swirl

Process by which compressed material dispenses from a nozzle with blowing air to form a spiral cord. Product spirals overlap as dispensed to form a thin film in the crash (set with doors).

LASD

Process by which the compressed material is dispensed allowing anti-vibration product pads to be applied in the form of wide striping for sound deadening purposes.

Bead

Process by which compressed material dispenses from a nozzle to form a cord. Used in engine sealing, gluing & mastic removal.

Droplets

Process by which compressed material dispenses from a nozzle to form a droplet. Material drops are positioned on hoods, doors & deck lids for anti-flutter bracket attachments.

Streaming

Process by which the compressed material is projected allowing an application a greater distance from the work piece.

Spraying

Process by which the compressed material is sprayed allowing an application a greater distance from the work piece. The width & amount of product dispensed depends on the nozzle type used.

Skill Tip

Sames offers premium finishing airless tip at medium pressure pump (100bar-xx psi). Technical disruptor on Tip technologies, Skill tips are able to spray material reacting badly with air inclusion.

Chop Check

This pumping technology is the most used in the thick world (sealant and adhesives).

Metal Sealing

sealing technology made metal on metal allowing pumping of very thick or very hot materials.

Documents

Select all documents

Foot valve SK (for NA only)

Format : application/pdf
Size : 271Ko

Select the document

REXSON S1 EXTRUSION PUMP leaflet (For NA only)

Format : application/pdf
Size : 1Mo

Select the document

Materials

Grease Silicone

Silicone grease is commonly used for lubricating & preserving rubber parts, such as O-rings. Additionally silicone grease does not swell or soften the rubber, which can be a problem with hydrocarbon-based grease. It functions well as a corrosion-inhibitor & lubricant for purposes that require a thicker lubricant. Thermal grease often consists of a silicone grease base along with added thermally conductive fillers. It is used for heat transfer abilities rather than friction reduction.

Silicone Two-Component Sealant

Silicone sealants can be used in two or three components for increasing mechanical capabilities.

Silicone Sealant

Silicone sealants are used to protect & seal anything from the smallest silicon chip to the world's tallest skyscrapers.

Polyurethane Sealant

Polyurethane Sealant is abrasion resistant, odorless, remains flexible at low temperatures & is 100% urethane. It's quick & simple to use with its fast-setting capabilities that help to reduce downtime. The balanced, low-viscosity liquid components form an easy-to-use paste.

Polyurethane Sealant with Accelerator

Accelerator speeds up the setting process for 1K sealant to achieve rapid rain resistance & thorough setting of the accelerated foundation sealant.

Polyurethane Two-Component Sealant

Polyurethane Two-Component Sealant can be used in two or three components for increasing mechanical & chemical capabilities.

MS Polymer Sealant

Silyl modified polymers (SMP, also silane-modified polymers, silane-terminated polymers) are polymers (large, chained molecules) terminating with a silyl (SiH3) group. SMPs are the main components in solvent-free & isocyanate-free sealant and adhesive products. Typically the sealant products manufactured with silyl modified polymers have good adhesion on a wide range of substrate materials, and have good temperature & UV resistance.

Polyvinyl Chloride (PVC)

Used for waterproofing, anti-ship for Under Body Coating (UBC),under body sealing (UBS) or Interior sealing.

Hybrid Sealant

Today polyurethane & silicone sealants are considered "high performance products." They deliver a significant adhesion, a good movement capability & are durable. However, these high performance products do have their limitations & disadvantages.

Anti-Corrosion Epoxy Multi-Component

The Anti-Corrosion Epoxy Multi-Component product is highly resistant to marine & industrial environments, buried conditions, ground water, effluents, salt water & a wide range of oils & chemicals.

Anti-Corrosion Polyurethane Multi-Component

A two-component efficient coating product, used as first layer on metallic surfaces & in a wide range of painting systems. Forms an excellent quality anti-corrosive polyurethane film, ensuring the adherence between the surface & the next layer of the painting process.

Anti-Corrosion Epoxy High Solid

Used for the steel structures of steel pipeline, steel frame, bridge & plant facilities for effective, long-term substrate protection.

Adhesive STP

STP Polymers are the new generation environmentally friendly polymers that are replacing the isocyanate & solvent containing polyurethane resins to produce sealant & adhesive products that are safer & greener for the consumer & tradesman.

Adhesive Polyurethane

Polyurethane (PU or PUR for short) is not a single material with a fixed composition, but instead a range of chemicals sharing similar chemistry. It is a polymer composed of organic chain units joined by urethane or carbamate links. Most polyurethanes are thermosetting polymers & do not melt when heated unlike thermoplastic polyurethanes which do.

Adhesive Hybrid

Hybrid Adhesive Sealants are one component formulations that form robust, permanent & flexible bonds offering great adhesion to many materials for reliable performance, are paintable when wet for fast process time, have a fast skin time for a tack-free surface, are isocyanate-free for reduced health & safety concerns & resist degradation from sunlight for excellent aesthetics.

Adhesive 1K Accelerator

Additional accelerator used for polyurethane or silicone adhesives speed up the chemical reaction between the adhesive & the material they are bonding. Used often in the field where temperatures are lower to accelerate the bonding times.

Adhesive Polyurethane Multi-Component

Two-component polyurethanes (also called 2C PUR) have the advantages of single component polyurethane adhesives, but cure more quickly through larger gaps & are not dependent on moisture/heat for curing.

Adhesive Acrylic

Adhesive acrylics were developed for structural bonding applications that require tensile, shear & peel strength combined with maximum impacts, stress & shock resistance.

Adhesive Silicone

In general, users can count on silicone adhesives to produce bonds that can withstand high temperatures (in some cases up to 600°F), remain flexible even after curing & resist chemicals including water.

Adhesive Butyl

This adhesive is highly resistant & aggressive sticking to almost any substrate despite its easy fit application properties.

Adhesive Silicone Multi-Component

Two-component silicone has the advantages of single component silicone adhesives, but cure more quickly through larger gaps & are not dependent on heat for curing.

Adhesive Epoxy

Epoxy adhesives, dependent upon the specific chemistry of the system & nature of the cross-linking available, adhere to a wide variety of materials. Some of the most important performance requirements include exceptional chemical & heat resistance, excellent adhesion & water resistance, as well as satisfactory mechanical & electrical insulating properties.

Adhesive MS Polymer

MS Polymers are the next generation of silicones & mastics. Unlike their counterparts these products adhere well to most substrates without the use for specific primers. By using these products you can reduce the risk of application mistakes.

Adhesive Epoxy Multi-Component

Two-component epoxies feature unique versatility in application & performance. These systems consist of a resin & a hardener that can be formulated to offer a wide range of mechanical, thermal, optical & electrical properties.

UV Material Epoxy Multi-Component

UV-resistant epoxy systems mixed with hardener cure faster & in moist conditions.

UV Material 100% Solid

UV coatings can be formulated up to 100% solids so that they have no volatile component that contributes to pollution.

UV Material Epoxy

UV curable epoxy systems do not require the addition of curing agents. They cure within minutes, or even seconds, and have unlimited working times.

UV Material Polyurethane Multi-Component

The UV polyurethane multi-components are especially designed for very strong UV stability. Mixing with hardener gives very high durability & UV resistance.

UV Material Polyurethane

The UV polyurethanes are especially designed for UV stability, The coating is long lasting, offers excellent substrate protection, provides an attractive finish & is user-friendly.

Markets