PMP150 E Airspray Diaphragm Paint Pump
- PMP 150 E is now obsolete, please refer to the PRIMA pump 01D100 and 01D100E
PMP 150 E is the perfect solution to pump abrasive water-based coatings.
Designation | Value | Unit: metric (US) |
---|---|---|
Pressure Ratio | 1 : 1 | |
Maximum Fluid Pressure | 6 (87) | bar (psi) |
Maximum Air Pressure | 6 (87) | bar (psi) |
Maximum Temperature | 50 (122) | °C (°F) |
Cylinder | 100 (3.4) | cc (oz) |
Sound Level | < 70 | dBa |
Fluid Output at 30 cycles/mn | 3 (0.8) | l/min (gal/mn) |
Free Flow Rate | 19 (5) | l/mn (gal/mn) |
Air Consumption at 30 cycles/mn at 4 bar (60 psi) | 1.1 (0.6) | m³/h (cfm) |
Air Inlet | F 3/8" BSP | |
Fluid Outlet | F 3/8" BSP | |
Fluid Inlet | F 3/8" BSP | |
Number of Cycles per liter of products | 10 | |
Height | 22 (8.7) | cm (in) |
Width | 20 (7.9) | cm (in) |
Depth | 15 (5.9) | cm (in) |
Wetted Parts: Polypropylene, PTFE, Polyurethane | ♦ | |
Polyurethane Diaphragm Material | ♦ | |
Weight | 5 (11) | kg (lbs) |
Designation | Setup | Part number |
---|---|---|
PMP 150E BARE PUMP | Bare pump | 144932000 |
Designation | Details | Part number | |
---|---|---|---|
AIR MOTOR FEEDING FOR PMP | Air motor power regulator to set the motor pressure | 1 | 151753050 |
PMP 150 WALL MOUNTED BRACKET | Bracket to mount the pump on a wall | 2 | 051751030 |
SUPPORT FOR PUMP 150 PRATIK | Spare tripod | 4 | 051755010 |
ENS GRAVITY CUP WITH SUPPORT FOR PMP 150 PRATIK | 2L paint cup with support to mount on the tripod | 5 | 151758100 |
Essential Cart | 151730140 |
Designation | Details | Part number | |
---|---|---|---|
PACKAGE OF SEALS FOR AIR MOTOR PMP 150 PUMP _1.175 PUMP | Seal kit for the air motor | 1 | 144931091 |
GRAVITY CUP | 2L paint cup without support to put on the tripod | 2 | 151662355 |
SET OF SEALS TEFLON PRODUCT. | Seal kit for the fluid section in Teflon | 3 | 144931092 |
Format : application/pdf
Size : 351Ko
Format : application/pdf
Size : 14Mo
Format : application/pdf
Size : 3Mo