Sames | M22 P Basik HPA Manual Airspray Spray Gun Pressure

Description

Low to medium viscosity material
Easy to handle gun, especially when used with our new hoses
Good finish quality

► Technical manual

Performance

♦ Very fine atomization for a high-gloss finish
♦ Superior atomizing capabilities for low to medium viscosity material
♦ Light and easy to handle gun, especially when used with our new hoses (lightest and one of the most flexible on the market)

Productivity

♦ Ergonomic due to a very comfortable body design
♦ EZ-Adjust aircap for easy rotation adjustment
♦ Reduced trigger effort due to its in-line air valve
♦ One of the lightest manual spray guns in its category & perfectly balanced: reducing repetitive strain injuries (RSI)
♦ Large range of projectors (aircap + nozzle + needle) & stainless steel fluid passages (compatible with a large range of solvent and water-based materials) allowing it to be used for all kinds of applications

Sustainability

♦ Designed from high-end materials (stainless steel, anodized forged aluminum body, brass) in conjunction with Sames's machined projectors (aircaps + nozzle + needle) ensure extended product life
♦ Reduction of the number of components makes for quick and easy maintenance

M22 P Basik HPA is a very affordable solution to spray medium viscosity material. It can be fed by pressure pots or low-pressure spray pumps.

Technical data table

Designation	Value	Unit: metric (US)
Maximum Fluid Pressure	6 (87)	bar (psi)
Maximum Fluid Outlet	400 (14)	cc/min (oz/min)
Minimum Fluid Outlet	250 (8.8)	cc/min (oz/min)
Maximum Air Pressure	6 (87)	bar (psi)
Recommended Air Pressure (min)	2.9 (42)	bar (psi)
Air Consumption	31 (18.2)	m3/h (cfm)
Transfer Efficiency	63	%
Maximum Fluid Temperature	50 (122)	°C (°F)
Air Inlet	M 1/4" NPS
Fluid Inlet	M 3/8" NPS
Polished Forged Aluminum Body	♦
Wetted Parts, Stainless Steel	♦
Ph	5 - 8
Weight	530 (18.7)	g (oz)

Equipment

Designation	Max Fluid viscosity (CA 4)	Projector	Nozzle size	Air Consumption	Fluid Output	Fan width at 20cm (8in)	Part number
M22 P BASIK	-	-	-	-	-	-	135147200
M22 P BASIK	< 20 s	09 BA 3	0.9 mm (0.035 in)	30 m3/h (17.6 cfm)	250 cc/mn (8.5 oz/mn)	31 cm (12.2 in)	135147205
M22 P BASIK	20 - 40 s	12 BA 3	1.2 mm (0.047 in)	31 m3/h (18.2 cfm)	270 cc/mn (9.1 oz/mn)	32 cm (12.6 in)	135147206
M22 P BASIK	20 - 40 s	15 BA 3	1.5 mm (0.059 in)	32 m3/h (18.8 cfm)	350 cc/mn (11.8 oz/mn)	36 cm (14.2 in)	135147207
M22 P BASIK	20 - 40 s	18 BA 3	1.8 mm (0.071 in)	32 m3/h (18.8 cfm)	400 cc/mn (13.5 oz/mn)	39 cm (15.4 in)	135147208

Accessories

Designation	Max Fluid viscosity (CA 4)	Aircap	Nozzle size	Needle	Compatibility	Air Consumption	Fluid Output	Fan width at 20cm (8in)		Part number
PROJECTOR	< 20 s	BA 3	0.9 mm (0.035 in)	07 - 12	-	30 m3/h (17.6 cfm)	250 cc/mn (8.5 oz/mn)	31 cm (12.2 in)	1	031147005
PROJECTOR	20 - 40 s	BA 3	1.2 mm (0.047 in)	07 - 12	-	31 m3/h (18.2 cfm)	270 cc/mn (9.1 oz/mn)	32 cm (12.6 in)	2	031147006
PROJECTOR	20 - 40 s	BA 3	1.5 mm (0.059 in)	14 - 18	-	32 m3/h (18.8 cfm)	350 cc/mn (11.8 oz/mn)	36 cm (14.2 in)	3	031147007
PROJECTOR	20 - 40 s	BA 3	1.8 mm (0.071 in)	14 - 18	-	32 m3/h (18.8 cfm)	400 cc/mn (13.5 oz/mn)	39 cm (15.4 in)	4	031147008
AIRCAP	-	BA 3	-	-	-	-	-	-	5	132147200
NEEDLE	-	-	-	07 - 12	nozzle 0.7 to 1.2	-	-	-	6	033140100
NEEDLE	-	-	-	14 - 18	nozzle 1.5 to 1.8	-	-	-	7	033140200
NOZZLE	< 20 s	-	0.9 mm (0.035 in)	-	aircap BA 3	-	-	-	8	134130200
NOZZLE	20 - 40 s	-	1.2 mm (0.047 in)	-	aircap BA 3	-	-	-	9	134130300
NOZZLE	20 - 40 s	-	1.5 mm (0.059 in)	-	aircap BA 3	-	-	-	90	134130600
NOZZLE	20 - 40 s	-	1.8 mm (0.071 in)	-	aircap BA 3	-	-	-	91	134130700

Spare Parts

Designation	Details		Part number
PACK OF SEALS FOR M22G AND M22P	Pack of seals	1	129130901
SERVICING KIT FOR M22P	Maintenance pack (includes a pack of seals + gun components)	2	129140902

Technologies

Airspray HPA™

HPA is an Airspray technology offering high power atomization.

Documents

Select all documents

M22 P Basik HPA Manual Airspray Spray Gun Pressure

Format : application/pdf
Size : 418Ko

Select the document

Leaflet M22 A-G Manual Airspray Spray Gun (English version) Sames

leaflet M22 Airspray

Format : application/pdf
Size : 482Ko

Select the document

Catalog Airspray Range Sames (English version)

Catalog airspray range sames kremlin

Format : application/pdf
Size : 14Mo

Select the document

General Catalog (only for North American market) Sames

General Catalog North America

Format : application/pdf
Size : 3Mo

Select the document

Instruction Manuals

Select all documents

Materials

Primer Epoxy

Epoxy primer/sealer is a non-porous finish that is typically recommended as the first base coat over bare steel.

Primer Epoxy Multi-Component

Epoxy primer/sealer multi-component is a non-porous finish base mixed with a hardener that is typically recommended as the first base coat over bare steel.

Primer Polyurethane Multi-Component

Designed to hide profile & surface imperfections, multi-component polyurethane primers & sealers improve adhesion of top coats to the substrate due to the addition of a hardener.

Primer Water-Based

Designed to hide profile & surface imperfections, water-based primers & sealers are environmentally friendly.

Primer Polyurethane

Designed to hide profile & surface imperfections, polyurethane primers & sealers promote adhesion of top coats to the substrate.

Water-Based Stains

Water-Based Wood Stains have all the advantages of oil-based stains. They spread easily, can be repaired, blend effortlessly & have plenty of open time. The thicker formula allows for controlled penetration, which will reduce blotching on softer woods such as Aspen, Pine & Maple.

Solvent-Based Stains

A wood stain consists of a colorant suspended or dissolved in an agent or solvent. Colored, or ''stained", finishes do not penetrate the pores of the wood to any significant degree.

CARC Polyurethane Multi-Component

Chemical Agent Resistant Coating (CARC) can be two-component polyurethane paint commonly applied to military vehicles to provide protection against chemical & biological weapons.

UV Material Epoxy Multi-Component

UV-resistant epoxy systems mixed with hardener cure faster & in moist conditions.

UV Material Epoxy

UV curable epoxy systems do not require the addition of curing agents. They cure within minutes, or even seconds, and have unlimited working times.

Top Coat Polyurethane Multi-Component

Polyurethane Top Coat is a two- or three-pack isocyanate-cured polyurethane that gives a durable, high gloss finish. Isocyanates included in the hardener are moisture-sensitive & need a specific process for insulating the circuit.

Top Coat Epoxy

Top Coat Epoxys are used for decorative flooring applications, such as Terrazzo flooring, chip flooring & colored aggregate flooring.

Top Coat Epoxy Multi-Component

Two-part epoxy coatings were developed for heavy duty service on metal substrates & use less energy than heat-cured.

Top Coat Water-Based

Water-based polyurethane is popular because of its low odor & low toxicity. It goes on clear without adding a faint color like oil-based versions do & it dries much faster.

Top Coat Polyurethane

Polyurethane Top Coat gives a durable, high gloss finish.

Metallic Epoxy

The newest metallic epoxy system on the market allows contractors to heighten the effects & make floors look three-dimensional.

Metallic Water-Based

Polyurethane water-based coatings offer a very high chemical/physical resistance & steel effect & are environmentally friendly.

Metallic Epoxy Multi-Component

A two-component 100%-solid epoxy blended with metallic pigments, Metal Fusion is self-leveling, allowing easy application & seamless floor surfaces.

Metallic Polyurethane

Polyurethane coatings are particularly recommended for application to surfaces subject to high levels of wear & tear where excellent chemical/physical resistance is required. The metallic parts will give a steel effect.