Airmix® Xcite®+
Manual Spray Gun
The Airmix® Xcite®+ manual paint spray gun delivers outstanding performance with unsurpassed finish quality for a quick payback. It is available in 3 pressure ranges: 120, 240 & 400 bar (1740-3480-5800psi) to meet every application.
Product savings & environmental protection
Unsurpassed atomization quality
Ergonomically designed for outstanding performance
Description
Technical Data
Equipment
Accessories
Kits
Documents & Media
Technologies
Markets
Performance
1 Large tip selection with dedicated Xtra Fine Finish tips for water-based material with wide choice of flow rates and fan width patterns
2 Unsurpassed finishing quality and outstanding transfer efficiency with VX24 HVLP aircap
3 Built-in filter with high filtration capacity to avoid tip blockage and minimize pressure loss
♦ Job repeatability with our selection of tips that are individually tested to guarantee a consistent pattern
♦ Diffuser and deflector embedded to decrease the atomizing air consumption and improve atomization
Sustainability
7 Increased operator safety with trigger lock and aircap protection
♦ Anodized body with laser engraving not affected by exposure to solvents
♦ Construction built to last and compatible with all types of materials (even water-based with stainless steel fluid passage and Rulon® sealing)
♦ Double seal technology to prevent aircap leakage and paint return on the air circuit
| Designation | Value |
|---|---|
| Maximum Air Pressure (bar) | 6 |
| Maximum Air Pressure (psi) | 87 |
| Recommended Air Pressure (min) (bar) | 0.7 |
| Recommended Air Pressure (min) (psi) | 11.6 |
| Weight (g) | 579 |
| Weight (oz) | 20 |
| Type of electrostatic charge | No electrostatic |
| Air Inlet Fitting | M 1/4 NPS |
| Material Inlet Port | M 1/2" JIC |
| Swivel Fitting (available upon version) | Yes |
| Body Material | Aluminium |
| Wetted Parts | Stainless steel 303, PTFE, Tungsten carbide |
| Certification | ATEX II2G Ex h IIB T6 Gb X |
| Compatible spray tip | Airmix® Asymmetrical, Airmix® Fine Finish, Airmix® Xtra Fine Finish |
| Spraying type | Airmix® |
| Trigger Lock Safety | Yes |
| Designation | Part number |
|---|---|
| Xcite®+ gun 240B VX24 KHVLP AIRCAP & SWIVEL FITTING | 135732200 |
| Xcite®+ gun 120B VX24 KHVLP AIRCAP W/O SWIVEL FITTING | 135732120 |
| Xcite®+ gun 240B VX24 KHVLP AIRCAP W/O SWIVEL FITTING | 135732220 |
| Xcite®+ gun 400B VX24 KHVLP AIRCAP & SWIVEL FITTING | 135732400 |
| Xcite®+ gun 120B VX24 KHVLP AIRCAP & SWIVEL FITTING | 135732100 |
| Designation | Part number |
|---|---|
| SWIVEL FITTING NG22 500B F1/2'' JIC M1/4NPS | 129732435 |
| SWIVEL FITTING NG22 500BAR MF1/2" JIC | 129732425 |
| Straight extension 400 mm length | 075810010 |
| Textile hose Ø3.2 FF1/2'' JIC 240B 0.6M with spring | 050220061 |
| Textile hose Ø3.2 FF1/2'' JIC 240B 1M with spring | 050220101 |
| Textile hose Ø3.2 FF1/2'' JIC 240B 1.5M with spring | 050220151 |
| Textile hose Ø3.2 FF1/2'' JIC 240B 2M with spring | 050220201 |
| Textile hose Ø3.2 FF1/2'' JIC 240B 3M with spring | 050220301 |
| Textile hose Ø4.8 FF1/2''JIC 240B 0.6M with spring | 050240061 |
| Textile hose Ø4.8 FF1/2'' JIC 240B 1M with spring | 050240101 |
| Textile hose Ø4.8 FF1/2'' JIC 240B 1,5M with spring | 050240151 |
| Textile hose Ø4.8 FF1/2'' JIC 240B 2M with spring | 050240201 |
| Textile hose Ø4.8 FF1/2'' JIC 240B 3M with spring | 050240301 |
| Designation | Part number | Aircap | Spray gun | Tip | Pump type | Suction accessory | Fluid Inlet fitting | Hoses length (mm) | Hoses | Details | Swivel fitting | Two gun manifold | Air Regulator | Regulators |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| KIT Xcite®+ 120B & hose 15M | 151260990 | |||||||||||||
| KIT Xcite®+ 240B & hose 7.5M | 151260961 | |||||||||||||
| KIT Xcite®+ 120B & hose 7.5M | 151260960 | |||||||||||||
| KIT Xcite®+ 240B & hose 15M | 151260991 | |||||||||||||
| W/M PACK AIRMIX® PUMP 10C18 W/O SUCT ROD+XCITE®+120 W/O SWIVEL | 151665700 | VX124 | Xcite®+ 120 | - | Wall mounted | - | F1/2" BSPP | |||||||
| W/M PACK AIRMIX® PUMP 10C18 & SUCT ROD+XCITE®+120 W/O SWIVEL | 151665720 | VX124 | Xcite®+ 120 | - | Wall mounted | Suction rod ID 10 mm | M 26x125 | |||||||
| KIT 10C18 W/M W/O SUCT WITH XCITE®+120 H7.5M AIRCAP TIP06.094 | 151665730 | VX124 | Xcite®+ 120 | 06.094 | Wall mounted | - | M 26x125 | 7.5 | Yes | |||||
| KIT 10C18 W/M WITH SUCT D6 XCITE®+120 H7.5M AIRCAP TIP06.094 | 151665740 | VX124 | Xcite®+ 120 | 06.094 | Wall mounted | Suction rod ID 10 mm | M 26x125 | 7.5 | Yes | |||||
| KIT 10C18 TRIP WITH SUCT D6 XCITE®+120 H7.5M AIRCAP TIP06.094 | 151665760 | VX124 | Xcite®+ 120 | 06.094 | Tripod | Suction rod ID 10 mm | M 26x125 | 7.5 | Yes | |||||
| KIT 10C18 W/M WITH SUCT D16 XCITE®+120 H7.5M AIRCAP TIP06.094 | 151665780 | VX124 | Xcite®+ 120 | 06.094 | Wall mounted | Suction rod ID 16 mm | M 26x125 | 7.5 | Yes | |||||
| RTS TRIPOD AIRMIX® PUMP 10C18 XCITE®+120 & AIRCAP & TIP HOS7.5 | 151665770 | VX124 | Xcite®+ 120 | 06.094 | Tripod | Suction rod ID 16 mm | M 26x125 | 7.5 | Yes | |||||
| W/M PACK AIRMIX® PUMP 15C25 NO FILT+SUC ROD&XCITE®+120 NO SWI | 151261001 | VX124 | Xcite®+ 120 | - | Wall mounted | Suction rod ID 16 mm | 7.5 | Yes | GT cartridge | |||||
| W/M PACK AIRMIX® PUMP 15C25 NO FILTER W/O SUCT ROD+Xcite®+120 | 151260976 | VX124 | Xcite®+ 120 | - | Wall mounted | - | 7.5 | Yes | GT cartridge | Yes | ||||
| W/M PACK AIRMIX® PUMP 15C25 NO FILTER&SUCTION ROD&Xcite®+120B | 151260974 | VX124 | Xcite®+ 120 | - | Wall mounted | Suction rod ID 16 mm | 7.5 | Yes | GT cartridge | Yes | ||||
| AIRMIX® PACK W/M 15C25 MBA NO FILT SUC D16 XCITE®+120 SWI H7.5 | 151265005 | VX124 | Xcite®+ 120 | - | Wall mounted | Suction rod ID 16 mm | 7.5 | Yes | MBA cartridge | Yes | ||||
| AIRMIX® PACK W/M 15C25 MBA NO FILT W/O SUC XCITE®+120 SWI H7.5 | 151265006 | VX124 | Xcite®+ 120 | - | Wall mounted | - | 7.5 | Yes | MBA cartridge | Yes | ||||
| AIRMIX® PACK W/M 15C25 MBA NO FILT SUC D16 XCITE®+120 H7.5 | 151265015 | VX124 | Xcite®+ 120 | - | Wall mounted | Suction rod ID 16 mm | 7.5 | Yes | MBA cartridge | |||||
| KIT 15C50 WALL/M WO ROD & FILTER & XCITE®+120 & TWIST SWIVEL | 151265052 | VX124 | Xcite®+ 120 | - | Wall mounted | - | 7.5 | Yes | GT cartridge + Filter | Yes | ||||
| KIT 15C50 WALL/M +ROD & FILTER & XCITE®+120 & TWIST SWIVEL | 151265053 | VX124 | Xcite®+ 120 | - | Wall mounted | Suction rod ID 23 mm | 7.5 | Yes | GT cartridge + Filter | Yes | ||||
| KIT 15C50 WALL/M PMP & ROD & XCITE®+120 & TWIST SWIVEL | 151265050 | VX124 | Xcite®+ 120 | - | Wall mounted | Suction rod ID 23 mm | 7.5 | Yes | GT cartridge | Yes | ||||
| PACK 15C50 2G W/M MBA SUC D25+FIL 2/XCITE®+120+2/09114+2/H7.5 | 151143650 | VX124 | 2x Xcite®+ 120 | 09-114 | Wall mounted | Suction rod ID 23 mm | 7.5 | Yes | MBA cartridge + Filter | Yes | Yes | |||
| KIT 17F60 SST WALL-MOUNTED & Xcite®+ 120B & HOSE 7.5M | 151260967 | |||||||||||||
| KIT 20C50 WALL-MOUNTED & Xcite®+ 120B & HOSE 7.5M | 151260966 | VX124 | Xcite®+ 120 | - | Wall mounted | Suction rod ID 23 mm | 7.5 | Yes | Chevron + filter | Yes | ||||
| PACK 20C50 GT W/M & Xcite®+120B & ROD & HOSE 7.5M | 151260973 | VX124 | Xcite®+ 120 | - | Wall mounted | Suction rod ID 23 mm | 7.5 | Yes | GT + filter | Yes | ||||
| W/M PACK AIRMIX® PUMP 30C25 NO FILTER+SUCTION ROD+Xcite®+240B | 151260975 | VX124 | Xcite®+ 240 | - | Wall mounted | Suction rod ID 16 mm | 7.5 | Yes | GT cartridge | Yes | ||||
| W/M PACK AIRMIX® PUMP 30C25 NO FILTER W/O SUCT ROD+Xcite®+240B | 151260977 | VX124 | Xcite®+ 240 | - | Wall mounted | - | 7.5 | Yes | GT cartridge | Yes | ||||
| W/M PACK AIRMIX® PUMP 30C25 & FILTER & SUCTION ROD+Xcite®+240B | 151260978 | VX124 | Xcite®+ 240 | - | Wall mounted | Suction rod ID 23 mm | 7.5 | Yes | GT cartridge + Filter | Yes | ||||
| W/M PACK AIRMIX® PUMP 30C25 NO FILT+SUC ROD&XCITE®+240 NO SWI | 151261002 | VX124 | Xcite®+ 240 | - | Wall mounted | Suction rod ID 23 mm | 7.5 | Yes | GT cartridge | |||||
| AIRMIX® PACK W/M 30C25 MBA NO FILT W/O SUC XCITE®+240 SWI H7.5 | 151265008 | VX124 | Xcite®+ 240 | - | Wall mounted | - | 7.5 | Yes | MBA cartridge | Yes | ||||
| AIRMIX® PACK W/M 30C25 MBA NO FILT SUC D16 XCITE®+240 SWI H7.5 | 151265007 | VX124 | Xcite®+ 240 | - | Wall mounted | Suction rod ID 16 mm | 7.5 | Yes | MBA cartridge | Yes | ||||
| AIRMIX® PACK W/M 30C25 MBA NO FILT SUC D25 XCITE®+240 H7.5 | 151265010 | VX124 | Xcite®+ 240 | - | Wall mounted | Suction rod ID 23 mm | 7.5 | Yes | MBA cartridge | |||||
| AIRMIX® PACK W/M 30C25 MBA SUC D23 XCITE®+240 SWI H7.5 | 151265009 | VX124 | Xcite®+ 240 | - | Wall mounted | Suction rod ID 23 mm | 7.5 | Yes | MBA cartridge + Filter | Yes | ||||
| KIT 34F60 WALL-MOUNTED & Xcite®+ 240B & HOSE 7.5M | 151260970 | VX124 | Xcite®+ 240 | - | Wall mounted | Suction rod ID 23 mm | 7.5 | Yes | Filter | Yes | Yes | 2 | ||
| PACK 35C50 W/M MBA SUC D25 XCITE®+240 TWIST H7.5+12.114 NO FI | 151148400 | VX124 | Xcite®+ 240 | 12-114 | Wall mounted | Suction rod ID 23 mm | 7.5 | Yes | MBA cartridge | Yes | ||||
| PACK35C50 W/M MBA SUC D25 FILTER XCITE®+240 TWIST H7.5+12.114 | 151148450 | VX124 | Xcite®+ 240 | 12-114 | Wall mounted | Suction rod ID 23 mm | 7.5 | Yes | MBA cartridge + filter | Yes | ||||
| PACK 35C50 2G W/M MBA SUC D25+FIL 2/XCITE®+240+2/09114+2/H7.5 | 151148650 | VX124 | 2x Xcite®+ 240 | 09-114 | Wall mounted | Suction rod ID 23 mm | 7.5 | Yes | MBA cartridge + filter | Yes | ||||
| KIT 40C50 WALL-MOUNTED & Xcite®+ 240B & HOSE 7.5M | 151260968 | VX124 | Xcite®+ 240 | - | Wall mounted | Suction rod ID 23 mm | 7.5 | Yes | Filter | Yes | Yes | 2 |
Documents PDF
-
Catalog - Airmix® Spraying and Equipment
-
product-xcite-airmix-manual-spray-gun_en_GB.pdf
-
product-xcite-airmix-manual-spray-gun_en_US.pdf
Linked Products
15C50
40C50
Airmix® Asymmetrical Fan Spray
Airmix® Fine Finish
Airmix® Xtra Fine Finish
Airmix® technology
Let's get in touch-
What is Airmix®?
Airmix® is a technology, invented in 1975 by Kremlin, combines the advantages of airless spraying and air-assisted spraying to deliver high-quality paint application with improved transfer efficiency and reduced product consumption.
-
What are the benefits of using Airmix®?
Airmix® technology enables the application of thicker paint layers to better protect surfaces, without compromising on finish quality. Its benefits include superior finish quality, high transfer efficiency, lower paint consumption, and fast, uniform application.
-
For which types of projects is Airmix® recommended?
Airmix® technology is ideal for industrial applications where a balance between protective thickness and finish quality is required, such as furniture manufacturing, the transportation industry, and rolling equipment, among others.