10C18
Paint pump
The 10C18 Airmix® pump is perfect for painting small quantities of fluid products, water or solvent based. The simple design reduces maintenance and cleaning time.
Good chemical compatibility with several choices of seals
Fast color changes with minimum solvent consumption
Large range of "ready to spray" kits
Description
Technical Data
Equipment
Accessories
Kits
Documents & Media
Technologies
Markets
Performance
1 Optimized air motor working perfectly with an air compressor of only 0,5 HP.
1 Quiet air motor for comfort.
1 Limited pulsation thanks to fast motor inversion even at very low air pressure.
2 Full stainless steel fluid section: perfectly adapted to a wide range of materials including waterborne paints.
Productivity
3 Large foot valve delivering enough suction power to handle a large range of material viscosity.
3 Suction valve fully compatible with other pump on the range (15C25 and 30C25).
4 Reduced fluid section volume minimizes product and solvent losses during flushing.
5 Closed construction decreases the risk of injuries and protect lubricant from external contamination.
Sustainability
3 Easy servicing with direct access to the suction valve.
6 Easy coupling for a quick dissasembling.
♦ The mobile seal located on the piston ensures the mechanical cleaning of the fluid section internal wall during the paint pump run.
♦ No external air distributor allows 45% less part vs competitors for a better maintenance.
♦ Triple chrome-plated piston parts compatible with all waterborne materials.
♦ Single GT seal, no throat packing maintenance, low friction & large lubricant wet cup.
| Designation | Value |
|---|---|
| Maximum Air Pressure (bar) | 6 |
| Maximum Air Pressure (psi) | 87 |
| Fluid Output at 20 cycles / mn (gal/min) | 0.095 |
| Fluid Output at 20 cycles / mn (l/min) | 0.36 |
| Fluid Output at 60 cycles / mn (gal/min) | 0.28 |
| Fluid Output at 60 cycles / mn (l/min) | 1.08 |
| Free Flow Rate (gal/min) | 0.29 |
| Free Flow Rate (l/min) | 1.1 |
| Number of cycles per liter of products | 55 |
| Pump displacement (cc/cycle) | 18 |
| Pump displacement (in^3/cycle) | 1.09 |
| Depth (in) | 5.9 |
| Depth (mm) | 150 |
| Height (in) | 15.5 |
| Height (mm) | 392.5 |
| Width/depth (in) | 11 |
| Width/depth (mm) | 278.5 |
| Maximum Material Pressure (bar) | 60 |
| Maximum Material Pressure (psi) | 870 |
| Pressure ratio | 10/1 |
| Air Consumption (cfm) | 1.12 |
| Air Consumption (m3/h) | 1.9 |
| Weight (kg) | 5.3 |
| Weight (lbs) | 12 |
| Maximum Temperature (°C) | 60 |
| Maximum Temperature (°F) | 140 |
| Power Source | Pneumatic |
| Air Inlet Fitting | F3/8" BSPP |
| Material Inlet Port | F 1/2'' BSP / M 26x125 |
| Material Outlet Port | M 1/2" JIC |
| Wetted Parts | Hard chrome stainless steel, POM C, Stainless steel 303, Tungsten carbide |
| Certification | CE-UKCA II2G Ex h IIB T4 Gb X |
| Motor Type | Differential |
| Pump Type | Cup pump with balls |
| Pumping technology | Cup piston pumps |
| Sound Level (dbA) | 79.4 |
| Designation | Part number | Material inlet | Lower seal | Setup | Suction accessory | Throat seal |
|---|---|---|---|---|---|---|
| 10C18 PUMP BARE - SEALS GT AND TEFLON | 144855500 | M26x125 | PTFE | Wall mounted | - | GT |
| 10C18 PUMP BARE - SEALS GT AND PU | 144855520 | M26x125 | PU | Wall mounted | - | GT |
| 10C18 PUMP BARE - SEALS GT AND POM | 144855530 | M26x125 | Polyacetal | Wall mounted | - | GT |
| 10C18 PUMP BARE - SEALS GT AND PU - F 1/2 BSPP | 144855540 | F1/2" BSPP | PU | Wall mounted | - | GT |
| 10C18 PUMP BARE - SEALS GT AND TEFLON- F 1/2 BSPP | 144855550 | F1/2" BSPP | PTFE | Wall mounted | - | GT |
| 10C18 PUMP BARE - SEALS GT AND POM-C- F 1/2 BSPP | 144855560 | F1/2" BSPP | Polyacetal | Wall mounted | - | GT |
| Designation | Part number |
|---|---|
| Tripod | 151665705 |
| Single post cart | 151730140 |
| Handle | 151665651 |
| Suction rod Ø6.5 M26 plunging tube length 230mm straight | 151665640 |
| Stainless Steel Suction rod Ø16 M26 plunging tube length 570 mm elbowed | 149596050 |
| Stainless Steel Suction rod Ø16 M26 plunging tube length 1000mm elbowed (for 200 liters drums) | 149596060 |
| Designation | Part number | Aircap | Spray gun | Tip | Pump type | Suction accessory | Fluid Inlet fitting | Hoses length (mm) | Hoses |
|---|---|---|---|---|---|---|---|---|---|
| W/M PACK AIRMIX® PUMP 10C18 W/O SUCT ROD+XCITE®+120 W/O SWIVEL | 151665700 | VX124 | Xcite®+ 120 | - | Wall mounted | - | F1/2" BSPP | ||
| W/M PACK AIRMIX® PUMP 10C18 & SUCT ROD+XCITE®+120 W/O SWIVEL | 151665720 | VX124 | Xcite®+ 120 | - | Wall mounted | Suction rod ID 10 mm | M 26x125 | ||
| KIT 10C18 W/M W/O SUCT WITH XCITE®+120 H7.5M AIRCAP TIP06.094 | 151665730 | VX124 | Xcite®+ 120 | 06.094 | Wall mounted | - | M 26x125 | 7.5 | Yes |
| KIT 10C18 W/M WITH SUCT D6 XCITE®+120 H7.5M AIRCAP TIP06.094 | 151665740 | VX124 | Xcite®+ 120 | 06.094 | Wall mounted | Suction rod ID 10 mm | M 26x125 | 7.5 | Yes |
| KIT 10C18 TRIP WITH SUCT D6 XCITE®+120 H7.5M AIRCAP TIP06.094 | 151665760 | VX124 | Xcite®+ 120 | 06.094 | Tripod | Suction rod ID 10 mm | M 26x125 | 7.5 | Yes |
| RTS TRIPOD AIRMIX® PUMP 10C18 XCITE®+120 & AIRCAP & TIP HOS7.5 | 151665770 | VX124 | Xcite®+ 120 | 06.094 | Tripod | Suction rod ID 16 mm | M 26x125 | 7.5 | Yes |
| KIT 10C18 W/M WITH SUCT D16 XCITE®+120 H7.5M AIRCAP TIP06.094 | 151665780 | VX124 | Xcite®+ 120 | 06.094 | Wall mounted | Suction rod ID 16 mm | M 26x125 | 7.5 | Yes |
| KIT AIRLESS 10C18 F1/2 W/M W/O SUCT +SFLOW275B 2F W/O TIP | 151665800 | For flat tip | Sflow™ 275 2F | - | Wall mounted | - | F1/2" BSPP | ||
| KIT 10C18 TRIPOD + Xcite Light | 154600004 | VX124 | Xcite®+ Light 120 | 09-114 | Tripod | 6L Hopper | M 26x125 | 6.5 | Yes |
Documents PDF
-
Catalog - Airmix® Spraying and Equipment
-
product-10C18-Airmix-Paint-Pump_en_GB.pdf
-
product-10C18-Airmix-Paint-Pump_en_US.pdf
Documents Instruction Manuals
-
10C18 | User manual
Documents 3D/2D
-
3D file 10C18
-
3D file 10C18
Linked Products
Airmix® Xcite®+ Light
Airmix® technology
Let's get in touch-
What is Airmix®?
Airmix® is a technology, invented in 1975 by Kremlin, combines the advantages of airless spraying and air-assisted spraying to deliver high-quality paint application with improved transfer efficiency and reduced product consumption.
-
What are the benefits of using Airmix®?
Airmix® technology enables the application of thicker paint layers to better protect surfaces, without compromising on finish quality. Its benefits include superior finish quality, high transfer efficiency, lower paint consumption, and fast, uniform application.
-
For which types of projects is Airmix® recommended?
Airmix® technology is ideal for industrial applications where a balance between protective thickness and finish quality is required, such as furniture manufacturing, the transportation industry, and rolling equipment, among others.