Sames | 35C50 Airless Paint pump

Description

Designed for long-lasting industrial use
Fast color changes with minimum solvent consumption
Simple design to minimize maintenance time and operation

Performance

1 Quiet and balanced air motor for constant delivery
1 Due to fast motor inversion at very low air pressures, there is limited pulsation
2 Stainless-steel fluid section adapted to a wide range of materials including water-based paints
3 Designed to eliminate dead zones for quick color changes
♦ Pulse-free for a superior finish
♦ Able to flush and prime at very low air pressures (0.6 bar/8.5 psi)

Productivity

3 Large foot valve to handle high viscosity materials up to 5,000 cPs - carbide seat
4 Reduced fluid section volume minimizes product and solvent losses during flushing.
5 Closed construction decreases the risk of injuries and protects the lubricant from external contamination
5 Leak indicator weep hole for fast visual inspection
6 Easy rotating outlet fitting to fit various configurations

Sustainability

1 Stall-free Differential Air Motor won't ice up
3 Easy to service with direct access to the suction valve
4 Single piece built-in cartridge with no dead zone
6 Easy coupling for a quick disassembling
♦ Mobile seal located on the piston ensures the cleaning of the fluid section internal wall while the paint pump is operational
♦ Low maintenance, no external air distributor which allows 45% fewer parts vs our competition
♦ Triple chrome-plated piston parts compatible with most materials
♦ Magnetic reversing valve to eliminate pump surge
♦ Reduced spare parts: 50% fewer parts vs competition

The 35C50 Airless paint pump will deliver excellent performance and outstanding benefits because of our proven pumping technology. With a powerful air motor, the 35C50 can feed up to 2 SFlow® Airless spray guns. It can handle material viscosities from 20 cps up to 5000 cps with very low air consumption. It comes with an optimized volume fluid section for fast color changes with minimal material loss.

The 35C50 Airless paint pump packages are ready to spray systems, available in wall-mount versions with cart as an option. Packages are available with the SFlow® Airless manual spray gun equipped with a 12.13 (515) reversible tip and 7.5 m (25ft) fluid hoses. A large variety of accessories are recommended to meet various customer needs.

This pump is also available as Airmix® system with Xcite® spray gun.

Additional Airmix® version with the Xcite® spray gun are also available.

Technical data table

Designation	Value	Unit: metric (US)
Pressure Ratio	35
Maximum Fluid Pressure	210 (3000)	bar (psi)
Recommended Fluid Output	750	cc/mn (cfm)
Maximum Fluid Output	1000	cc/mn (cfm)
Maximum Air Pressure	6 (87)	bar (psi)
Air Consumption	15	m³/h (cfm)
Maximum Temperature	60 (140)	°C (°F)
Fluid Output at 30 cycles/mn	1.5 (0.4)	l/min (gal/mn)
Fluid Volume per Cycle	50	cc
Free Flow Rate	3 (0.79)	l/mn (gal/mn)
Fluid Output at 15 cycles / mn	0.75	l/mn (gal/mn)
Seal Packings	MB-A cartridge
Fluid Outlet	M 1/2 JIC
Fluid Inlet	M 26x125
Height	58.5	cm (in)
Width	15.9	cm (in)
Depth	16	cm (in)
Wetted Shares: Stainless Steel	♦
Weight	8	kg (lbs)

Equipment

Designation	Fluid Inlet fitting	Suction	Stand	Filter & drain rod	Fluid pressure regulator	Atomizing air regulator	Part number
AIRLESS PUMP 35C50 MBA W/M M26x125	M26x125	-	Wall Mounted	-	•	-	151148200
AIRLESS PUMP 35C50 MBA W/M M26x125 SUCTION D25	M26x125	D25	Wall Mounted	-	•	-	151148300
AIRLESS PUMP 35C50 MBA W/M M26x125 FILTER + SUCTION D25	M26x125	D25	Wall Mounted	•	•	-	151148350
AIRLESS PUMP 35C50 MBA W/M F1/2	F1/2 BSP	-	Wall-mounted	-	•		151148150

Accessories

Designation					Part number
Gravity hopper 6 liters					151140230
Dismountable trolley					151241000

Kits

Designation	Fluid Inlet fitting	Suction	Stand	Filter & drain rod	Fluid pressure regulator	Hoses	Spray gun	Part number
Sflow 275 + 35C50	M26x125	D25	Wall Mounted	•	•	•	•	151148550

Spare Parts

Designation					Part number
GT Cartridge kit					144135205
Servicing kit C50 fluid section					144135237
MB-A Cartridge kit					144135365
Servicing kit for 970-4 motor					144160191

Technologies

GT Sealing

This technology represents a new generation of sealing designed to extend the life of a pump piston.

Cup Lub

A pump has a cup filled with lubricant at the top of the liquid section.

2 Ball

2 ball pumping technology is highly utilized in fluid sections with one ball / seat for suction & the other ball / seat for feeding.

Triple Chrome Layer

This is a special treatment for very high sustainability & is applied to the piston of the fluid section of a pump.

Documents

Select all documents

35C50 Airless®

Format : application/pdf
Size : 491Ko

Select the document

Airmix® Catalog 2020 Sames

Format : application/pdf
Size : 7Mo

Select the document

General Catalog (For North America only) Sames

General Catalog North America

Format : application/pdf
Size : 3Mo

Select the document

35C50 Pump Spare Parts Sheet (for NA only)

35C50 Spare Parts Sheet (for NA only)

Format : application/pdf
Size : 662Ko

Select the document

Instruction Manuals

Select all documents

35C50 | User manual

Format : application/pdf
Size : 6Mo

Select the document

Materials

Primer Epoxy

Epoxy primer/sealer is a non-porous finish that is typically recommended as the first base coat over bare steel.

Primer Polyurethane Multi-Component

Designed to hide profile & surface imperfections, multi-component polyurethane primers & sealers improve adhesion of top coats to the substrate due to the addition of a hardener.

Primer Water-Based

Designed to hide profile & surface imperfections, water-based primers & sealers are environmentally friendly.

Primer Polyurethane

Designed to hide profile & surface imperfections, polyurethane primers & sealers promote adhesion of top coats to the substrate.

Top Coat Polyurethane Multi-Component

Polyurethane Top Coat is a two- or three-pack isocyanate-cured polyurethane that gives a durable, high gloss finish. Isocyanates included in the hardener are moisture-sensitive & need a specific process for insulating the circuit.

Top Coat Epoxy Multi-Component

Two-part epoxy coatings were developed for heavy duty service on metal substrates & use less energy than heat-cured.

Top Coat Water-Based

Water-based polyurethane is popular because of its low odor & low toxicity. It goes on clear without adding a faint color like oil-based versions do & it dries much faster.