Sames | Magma500 Fluid Heater

Description

High pressure for heavy duty applications
Excellent performance even without circulation
Stainless steel design compatible with most coatings

► Technical manual

Performance

1 Perfect for High Solid coatings: minimizes pressure losses and allows high flow output
♦ Ultra high response time: 3800W heating power, material temperature rise of 50°C (122°F) at 1 lpm (0.26gpm)

Productivity

2 Air heating assistance: enhances atomizing air lowering the dry time and increasing the finish quality of Airmix® and Airspray coating
3 Precise temperature control: Maintains material temperature regardless of environmental factors

Sustainability

4 Safety: the full range of Magma500 integrates a temperature limiter
5 Modular Design: Makes it possible to replace the lower fluid body without changing the electrical modules eliminating the need to purchase a completely new heater
♦ Fully Stainless steel construction makes it compatible with most materials

Magma range is the only heater on the market to offer premium performances for all materials.

Magma500 heaters can be used in paint kitchens for circulation to maintain a constant temperature for each color or for direct heating (One Pass) to increase the temperature of the paint just before the application. This helps to atomize the paint at a lower pressure and reduces the use of solvents and thinners as heated paint will have a lower viscosity thus reducing VOC emissions. Additionally, the Magma500 heater can heat the atomizing air for faster drying times and increase finish quality in Airmix® or Airspray applications.

Our Magma500 heater is available in two sizes – 9mm (0.35in) ID for liquid to semi-viscous materials or a unique High Volume-HV 14mm (0.55in) ID for viscous to paste materials. For optimal safety, the range is fully explosion proof (II 2G Ex db IIB T4 Gb). (not applicable for NA)

When using the Magma500 heaters, the main benefits of heating the material are:
• Higher layer thicknesses can be achieved
• Viscosity adjustment without solvent consumption → reduction of VOC emission
• Lower pump output pressure → long packing lifetime
• Higher finishing quality → especially by using the atomizing air heating option
• Lower drying time
• Uniformity of the application, preserving the fluid line from temperature variations in a workshop

The following materials may be heated:

Water and solvent-based
Viscosity from 20 s CA4 to 100,000 cps
Epoxy primer, Polyurethane top coat, clear coat or varnish
Polyester
Single or plural components
UV coatings
High solid
High rich zinc coating
Sealant

One reference (440V version) can be controlled with external unit.

Technical data table

Designation	Value	Unit: metric (US)
Height	180 (7)	mm (in)
Width	220 (8.7)	mm (in)
Recommended Fluid Pressure	500 (7250)	bar (psi)
Maximum Viscosity	100,000	cps
Temperature	85 (185)	°C (°F)
100% Silicone-Free	♦
Length	405 (16)	m (ft)
Weight	17.6 (38.8)	g (oz)

Equipment

Designation	Internal Fluid diameter (mm/in)	Fitting IN/OUT	Volt max (V)	Power( W)	Material	Pmax pressure (bar/psi)	Part number
MAGMA 500 ID9 W/M HEATER 230V 3500W M1/2 JIC	9 (0.35)	M 1/2 JIC	230	3500	SST	500/7250	156160040
MAGMA 500 ID9 W/M HEATER 115V 1800W M1/2 JIC	9 (0.35)	M 1/2 JIC	115	1800	SST	500/7250	156160050
MAGMA 500 ID9 W/M HEATER 400V 3800W M1/2 JIC	9 (0.35)	M 1/2 JIC	400	3800	SST	500/7250	156160060
MAGMA 500 ID14 HV W/M HEATER 230V 3500W M3/4 JIC	14 (0.55)	M 3/4 JIC	230	3500	SST	500/7250	156160010
MAGMA 500 ID14 HV W/M HEATER 115V 1800W M3/4 JIC	14 (0.55)	M 3/4 JIC	115	1800	SST	500/7250	156160020
MAGMA 500 ID14 HV W/M HEATER 400V 3800W M3/4 JIC	14 (0.55)	M 3/4 JIC	400	3800	SST	500/7250	156160030
MAGMA 500 ID14 HV W/M HEATER 440V 3500W M3/4 JIC	14 (0.55)	M 3/4 JIC	440	3500	SST	500/7250	156160070

Accessories

Designation					Part number
TEMPERATURE INDICATOR FOR MAGMA 500 ID9					156160110
TEMPERATURE INDICATOR FOR MAGMA 500 ID14 HV					156160111
KIT FOR HEATING ATOMIZING AIR MAGMA 500					156160114

Spare Parts

Designation					Part number
HEAT EXCHANGER KIT FOR MAGMA 500 ID9					156160108
HEAT EXCHANGER KIT FOR MAGMA 500 ID14 HV					156160109
DIAL THERMOMETER MAGMA 500					156160115

Technologies

Airmix® spray technology

Since 1975, Airmix® combines conventional and high pressure Airless technologies advantages. It is today's industry standard for medium pressure atomization.

HVLP

This compliant technology ensures high transfer efficiency (minimum 65%) with reduced atomizing air pressure of 0.7 bar maxi.

Airless spray technology

High efficiency Airless sprayer technology under high pressure for large projects without the added use of compressed air.

Documents

Select all documents

Magma 500

Format : application/pdf
Size : 435Ko

Select the document

General Catalog (For North America only) Sames

General Catalog North America

Format : application/pdf
Size : 3Mo

Select the document

Instruction Manuals

Select all documents

Heater Magma 500| User manual

Format : application/pdf
Size : 3Mo

Select the document

Materials

Primer Epoxy

Epoxy primer/sealer is a non-porous finish that is typically recommended as the first base coat over bare steel.

Polyurethane Sealant

Polyurethane Sealant is abrasion resistant, odorless, remains flexible at low temperatures & is 100% urethane. It's quick & simple to use with its fast-setting capabilities that help to reduce downtime. The balanced, low-viscosity liquid components form an easy-to-use paste.

Polyurethane Two-Component Sealant

Polyurethane Two-Component Sealant can be used in two or three components for increasing mechanical & chemical capabilities.

Anti-Corrosion Water-Based

Some anti-corrosion materials are available in water-based versions. These green paints have a longer dry time, but meet most environmental requirements & have excellent protective qualities.

Anti-Corrosion Epoxy Multi-Component

The Anti-Corrosion Epoxy Multi-Component product is highly resistant to marine & industrial environments, buried conditions, ground water, effluents, salt water & a wide range of oils & chemicals.

Anti-Corrosion Epoxy Free Solvent

Solvent-free epoxy coatings are designed for long-term protection of steel & concrete structures against corrosion, abrasion & chemical attack. Operating temperature ranges from –40F to 1040F.

Anti-Corrosion Polyurethane Multi-Component

A two-component efficient coating product, used as first layer on metallic surfaces & in a wide range of painting systems. Forms an excellent quality anti-corrosive polyurethane film, ensuring the adherence between the surface & the next layer of the painting process.

Bitumen

Bitumen is an oil-based substance. It is a semi-solid hydrocarbon product produced by removing the lighter fractions (such as liquid petroleum gas, petrol & diesel) from heavy crude oil during the refining process.

Anti-Corrosion Epoxy High Solid

Used for the steel structures of steel pipeline, steel frame, bridge & plant facilities for effective, long-term substrate protection.

Anti-Corrosion Polyurethane

Polyurethane coatings are often used for the corrosion protection of steel because they are particularly economical to apply. They dry quickly & can therefore be over-coated in short intervals. They can also be applied independently of the weather conditions & are resistant to impact.

Water-Based Sound Deadener

Sound deadeners remove noise & unwanted vibrations by converting them into low grade heat & adding lightweight mass. The back-and-forth vibrations, or mechanical energy, are converted to low level thermal energy or heat, thereby providing structural resonance & impact noise deterrence.

Moisture-Sensitive Polyurethane Multi-Component

Catalyzed polyurethane clear coats and paints are prized for their durability and versatility around the world. They are used on everything from wood cabinetry, mill work and furniture to planes, trains, and automobiles. They are usually mixed with isocyanates in the hardener. The isocyanate component of polyurethane reacts with moisture in the air and form a hard crystalline structure.

Top Coat Polyurethane

Polyurethane Top Coat gives a durable, high gloss finish.

Metallic Epoxy Multi-Component

A two-component 100%-solid epoxy blended with metallic pigments, Metal Fusion is self-leveling, allowing easy application & seamless floor surfaces.

Metallic Polyurethane

Polyurethane coatings are particularly recommended for application to surfaces subject to high levels of wear & tear where excellent chemical/physical resistance is required. The metallic parts will give a steel effect.

Markets