Sames | 35C50 Airmix® Paint pump

Description

Suction rod or gravity hopper
Available in kits with one or two air regulators
Good chemical compatibility with GT or MB-A cartridges

Performance

1 Quiet and balanced air motor for constant delivery
1 There is minimal pulsation due to quick air motor change over at low air pressures
2 Stainless-steel fluid section compatible with a wide range of materials including water-based paints
3 Designed to eliminate dead zones for quick color changes
♦ Pulse-free for a superior finish
♦ Able to flush and prime at very low air pressures (0.6 bar/8.5 psi)

Productivity

3 Large foot valve to handle high viscosity materials up to 5,000 cPs - carbide seat
4 Small fluid section, minimal material loss during color changes
5 Closed construction decreases the risk of injuries and protects the lubricant from external contamination
5 Leak indicator weep hole for fast visual inspection
6 Easy rotating outlet fitting to fit various configurations

Sustainability

1 Stall-free Differential Air Motor won't ice up
3 Easy to service with direct access to the suction valve
4 Single piece built-in cartridge with no dead zone
6 Easy coupling for a quick disassembling
♦ Mobile seal located on the piston ensures the cleaning of the fluid section internal wall while the pump is in operation
♦ Low maintenance, no external air distributor assembly. 45% fewer parts vs competition
♦ Triple chrome-plated piston parts compatible with most materials
♦ Magnetic reversing valve to eliminate pump surge
♦ Reduced spare parts: 50% fewer parts vs competition

The 35C50 Airmix® paint pump will deliver excellent performance and outstanding benefits due to our 90 plus years on knowhow. With a powerful air motor, the 35C50 can feed up to (2) Airmix® or (2) SFlow™ Airless® spray guns. It can handle material viscosities from 20 cps up to 5000 cps with very low air consumption. It comes with an optimized fluid section volume for fast colour changes with minimal material loss.

The 35C50 Airmix® paint pump packages are available in wall-mount versions or cart mounting as an option. Packages are available with (1) Xcite® 240 bar Airmix® manual spray gun equipped with a spray tip and 7.5 m (25ft) air and fluid hoses. An Airless version with the SFlow™ spray gun along with a Skill™ for Airless® Fine Finish applications is also available (see dedicated page). A wide variety of options are available to meet all customer requirements.

Technical data table

Designation	Value	Unit: metric (US)
Pressure Ratio	35
Maximum Fluid Pressure	210 (3000)	bar (psi)
Recommended Fluid Output	1500 (0.4 gal/min)	cc/mn (cfm)
Maximum Fluid Output	3000 (0.8 gal/min)	cc/mn (cfm)
Maximum Air Pressure	6 (87)	bar (psi)
Air Consumption	15	m³/h (cfm)
Maximum Temperature	60 (140)	°C (°F)
Fluid Output at 30 cycles/mn	1.5 (0.4)	l/min (gal/mn)
Fluid Volume per Cycle	50 (0.013 gal)	cc
Free Flow Rate	5 (1.3)	l/mn (gal/mn)
Fluid Output at 15 cycles / mn	750 (0.19 gal/min)	l/mn (gal/mn)
Height	58.5 (23)	cm (in)
Width	23.5 (9.05)	cm (in)
Depth	23.5 (9.05)	cm (in)
Wetted Shares: Stainless Steel	♦
Weight	8	kg (lbs)

Equipment

Designation	Cartridge	Fluid Inlet fitting	Suction	Drain rod	Atomizing air regulator	Fluid pressure regulator	Filter pump output	Hoses	Part number
35C50 F1/2 wo Filter wo Rod	MB-A	F1/2 BSP	-	-	1	•	-	-	151148000
35C50 M26x125 wo Rod wo filter	MB-A	M26x125	-	-	1	•	-	-	151148050
35C50 M26x125 + Rod wo Filter	MB-A	M26x125	D25	-	1	•	-	-	151148250
35C50 M26x125 + Rod + Filter	MB-A	M26x125	D25	•	1	•	•	-	151148100

Accessories

Designation				Part number
Tripod				151140210
Wall-mounted totem				151140240
Dismountable trolley				151241000
Gravity hopper 6 liters				151140230
Stainless steel Suction rod Ø23 M26 plunging tube length elbowed 570 mm				149596150
Stainless steel Suction rod Ø23 M26 plunging tube length 1000mm elbowed (for 200 liters drums)				149596160
Stainless steel drain rod Ø16 elbowed F18 x 125				049596000
Fluid filter Mesh 6 3/8 (Inlet F1/2"JIC - Outlet M1/2"JIC)				155580600

Kits

Designation	Maximum output pressure(bar (psi))	Gun type	Tip	Hoses included	Swivel fitting	Mounting	Packing material	Output filter	Suction rod	Part number
PACK 35C50 W/M MBA SUC D25 XCITE®+240 TWIST H7.5+12.114 NO FI	210 (3045)	Xcite®+ 240	12-114	7.5 m (24 ft)	•	Wall	MB-A	-	Ø 23	151148400
PACK35C50 W/M MBA SUC D25 FILTER XCITE®+240 TWIST H7.5+12.114	210 (3045)	Xcite®+ 240	12-114	7.5 m (24 ft)	•	Wall	MB-A	•	Ø 23	151148450
PACK 35C50 2G W/M MBA SUC D25+FIL 2/XCITE®+240+2/09114+2/H7.5	210 (3045)	2 x Xcite®+ 240	2 x 09-114	2 x 7.5 m (24 ft)	2	Wall	MB-A	•	Ø 23	151148650

Spare Parts

Designation				Part number
Servicing kit for 970-4 motor				144160191
Reversing kit				144130191
GT Cartridge kit				144135205
GT cartridge and piston kit				144135291
MB-A Cartridge kit				144135365
MB-A cartridge and piston kit				144135389
Servicing kit C50 fluid section				144135237

Technologies

Cup Lub

A pump has a cup filled with lubricant at the top of the liquid section.

2 Ball

2 ball pumping technology is highly utilized in fluid sections with one ball / seat for suction & the other ball / seat for feeding.

MBA cartridge

MB-A cartridge is a patented sealing technology offering best performances - superior strength and durability - with water-based and premixed 2K materials

Triple Chrome Layer

This is a special treatment for very high sustainability & is applied to the piston of the fluid section of a pump.

Documents

Select all documents

35C50 Airmix®

Format : application/pdf
Size : 494Ko

Select the document

Airmix® Catalog 2020 Sames

Format : application/pdf
Size : 7Mo

Select the document

35C50 Pump Spare Parts Sheet (for NA only)

35C50 Spare Parts Sheet (for NA only)

Format : application/pdf
Size : 662Ko

Select the document

Instruction Manuals

Select all documents

35C50 | User manual

Format : application/pdf
Size : 6Mo

Select the document

Materials

Primer Polyurethane Multi-Component

Designed to hide profile & surface imperfections, multi-component polyurethane primers & sealers improve adhesion of top coats to the substrate due to the addition of a hardener.

Primer Water-Based

Designed to hide profile & surface imperfections, water-based primers & sealers are environmentally friendly.

Primer Polyurethane

Designed to hide profile & surface imperfections, polyurethane primers & sealers promote adhesion of top coats to the substrate.

CARC Water-Based

Chemical Agent Resistant Coating (CARC) is available in a water-based solution for environmental protection.

CARC Epoxy Multi-Component

Chemical Agent Resistant Coating (CARC) is a paint commonly applied to military vehicles to provide protection against chemical & biological weapons. The surface of the paint is engineered to be easily decontaminated after exposure to chemical warfare & biological warfare agents. The paint is also resistant to damage & removal by decontaminating solutions.

CARC Polyurethane Multi-Component

Chemical Agent Resistant Coating (CARC) can be two-component polyurethane paint commonly applied to military vehicles to provide protection against chemical & biological weapons.

Top Coat Polyurethane Multi-Component

Polyurethane Top Coat is a two- or three-pack isocyanate-cured polyurethane that gives a durable, high gloss finish. Isocyanates included in the hardener are moisture-sensitive & need a specific process for insulating the circuit.

Top Coat Epoxy Multi-Component

Two-part epoxy coatings were developed for heavy duty service on metal substrates & use less energy than heat-cured.

Top Coat Water-Based

Water-based polyurethane is popular because of its low odor & low toxicity. It goes on clear without adding a faint color like oil-based versions do & it dries much faster.