REVERSE FLUSH

Solution for optimization of the paint line rinsing system

Reverse Flush is a block that allows dumping and rinsing the material supply system without going through the sprayer.

Reverse Flush comes in 2 versions, remote and built-in; it can be installed within all the paint unit configurations:

It depends on the distance between the pump and the sprayer.

 

  • REMOTE REVERSE FLUSH BLOCK

When the pump is to be placed far away from the sprayer (distance > to 1.5 m) as in the case of the « Slim Arm » on which no pump can be assembled, then the so-called “remote” reverse flush block is used and is ideally placed at a distance between 1 and 1.5 m from the sprayer.

  • BUILT-IN REVERSE FLUSH BLOCK

When the pump is placed close to the sprayer (distance < to 1.5 m) as in the case of the “Process Arm”, then the reverse flush block is directly assembled onto the pump. The reverse flush block called “built-in” is used. This configuration is optimal with a simple installation.

Gdzie kupię
Reverse flush block