REVERSE FLUSH

Solution for optimization of the paint line rinsing system
Green check Reverse Flush is a block that allows dumping and rinsing the material supply system without going through the sprayer.
Green check Reverse Flush comes in 2 versions, remote and built-in; it can be installed within all the paint unit configurations:
Green check It depends on the distance between the pump and the sprayer.
Green check REMOTE REVERSE FLUSH BLOCK
Green check When the pump is to be placed far away from the sprayer (distance > to 1.5 m) as in the case of the « Slim Arm » on which no pump can be assembled, then the so-called “remote” reverse flush block is used and is ideally placed at a distance between 1 and 1.5 m from the sprayer.
Green check BUILT-IN REVERSE FLUSH BLOCK
Green check When the pump is placed close to the sprayer (distance < to 1.5 m) as in the case of the “Process Arm”, then the reverse flush block is directly assembled onto the pump. The reverse flush block called “built-in” is used. This configuration is optimal with a simple installation.
Skontaktuj się ze sprzedawcą

Wydajność

Decrease the time for rinsing and changing colors

Upgrade of existing facilities

Produktywność

Productivity increased

Reduced bulk of the equipment

Paint savings

Zrównoważony rozwój

Paint savings

Enhanced safety

Rinsing material savings

Designacja Wartość
Certyfikacja II 2 G c T6